What are the road traffic rules for motorcycles?

The Correct Operation Method for Automatic Transmission Vehicles When Stopping at Traffic Lights

The correct operation method for automatic transmission vehicles when stopping at traffic lights is to shift into neutral and apply the handbrake or electronic brake. Shifting into neutral can cut off the engine's power and save fuel, while the handbrake mainly prevents the vehicle from sliding when stationary. Another method is to directly step on the brake without shifting gears, which is suitable for temporary stops. When waiting at traffic lights, different drivers may use different parking methods. For very short stops, drivers can simply step on the brake while keeping the gear in D, allowing them to drive off immediately when the light turns green without restarting. Some vehicles are also equipped with an automatic start-stop function, which primarily enhances driving safety. When the system detects that the driver needs to stop, the automatic start-stop device activates, shutting off the engine.

7

1

Share

Where is the fuel pump relay located in the old Jetta?

The fuel pump relay in the old Jetta is located under the hood, at the upper left corner of the engine. Below is some relevant information about the Jetta VA3: Configuration: It comes equipped with ABS (Anti-lock Braking System), traction control, hill start assist, electronic stability control, brake assist, tire pressure monitoring, child seat interface, rear parking radar, engine start-stop, side air curtains, brake force distribution, LED daytime running lights, and more. Powertrain: It is powered by a 1.5L engine with a maximum output of 82kW and a peak torque of 145Nm. The official 0-100km/h acceleration time for the Jetta VA3 is 12.5 seconds.

9

3

Share

Can the Suburban be Driven in China?

The Suburban cannot be driven in China as its body dimensions clearly do not comply with Chinese road regulations. Below are some relevant details about the Suburban: Interior: The layout design of the new Suburban continues the style of the previous generation, with some adjustments in details, including a floating central control screen and push-button gear shifting. Powertrain: The new Suburban is equipped with three powertrain options: a 3.0L six-cylinder turbocharged diesel engine, a 5.3L V8 naturally aspirated engine, and a 6.2L V8 naturally aspirated engine, delivering maximum outputs of 281 horsepower, 360 horsepower, and 426 horsepower respectively, with peak torques of 623Nm, 519Nm, and 623Nm.

3

2

Share

Does the Volkswagen Tharu have a manual transmission?

Volkswagen Tharu does not have a manual transmission. The Volkswagen Tharu is positioned as a compact SUV with dimensions of 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. In terms of power, the Tharu is equipped with two engines: a 1.4T and a 2.0T. The 1.4T engine delivers a maximum power of 110 kW, a maximum horsepower of 150, and a maximum torque of 250 Nm. The 2.0T engine produces a maximum power of 137 kW, a maximum horsepower of 186, and a maximum torque of 320 Nm. For the transmission system, the Volkswagen Tharu is paired with a 7-speed dual-clutch transmission.

16

4

Share

Can National V Diesel Vehicles Be Registered?

National V diesel vehicles cannot be registered. The following are the changes in the National V gasoline standard and the introduction of exhaust gas management: Changes in the National V gasoline standard: Considering the potential risks of manganese to human health and its adverse effects on vehicle emission control systems, the manganese content limit has been reduced from 8 milligrams per liter in the fourth stage to 2 milligrams per liter, prohibiting the artificial addition of manganese-containing additives. Exhaust gas management: This should be approached from two aspects: one is control technology, mainly improving fuel combustion efficiency, installing pollution prevention treatment equipment, and developing new types of engines; the other is administrative measures, including scrapping and renewing, phasing out old vehicles, developing new types of vehicles (i.e., motor vehicles with no pollutant emissions), and starting from controlling fuel usage standards.

4

0

Share

What is the function of an automobile crankshaft?

The function of an automobile crankshaft is to convert the thrust transmitted by the piston connecting rod into rotational torque, transforming the reciprocating linear motion of the piston into the circular rotational motion of the crankshaft. It then delivers the engine torque to the transmission system via the flywheel, while also driving the engine's valve train and other auxiliary devices. The crankshaft is the most critical component in an engine. During engine operation, the piston is propelled by the combustion of the compressed air-fuel mixture, causing linear motion, which is then transmitted to the crankshaft via the connecting rod. The crankshaft converts this linear motion into rotational motion. The rotation of the crankshaft serves as the power source for the engine and the primary driving force for the entire mechanical system.

1

5

Share

What are the road traffic rules for motorcycles?

The Correct Operation Method for Automatic Transmission Vehicles When Stopping at Traffic Lights

Where is the fuel pump relay located in the old Jetta?

Can the Suburban be Driven in China?

Does the Volkswagen Tharu have a manual transmission?

Can National V Diesel Vehicles Be Registered?

What is the function of an automobile crankshaft?

What does the 2055516 tire mean?

Is the transmission of the Audi A3 dry or wet?

Where is the engine number of FAW Jetta?

What is the tire size of the Buick Excelle?