···
Log in / Register

What are the requirements of the China V emission standard?

4 Answers
MacAubree
07/29/25 3:16pm
The requirements of the China V emission standard are: 1. The carbon monoxide emissions per kilometer driven by a vehicle must not exceed 1000 milligrams; 2. The non-methane hydrocarbon emissions per kilometer driven by a vehicle must not exceed 68 milligrams; 3. The nitrogen oxide emissions per kilometer driven by a vehicle must not exceed 60 milligrams; 4. The particulate matter emissions per kilometer driven by a vehicle must not exceed 4.5 milligrams. The China V standard is the fifth-stage national standard for motor vehicle pollutant emissions, which imposes stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particulate matter emitted by motor vehicles. The purpose is to reduce and prevent environmental pollution caused by vehicle exhaust, protect the ecological environment, and ensure human health.
Was this review help?
20
3
Share
Maximus
08/14/25 8:01am
As an ordinary car owner, I paid special attention to the China 5 emission standard when purchasing a car last year, because new vehicles must comply with this regulation to be registered. Its core requirement is to significantly reduce tailpipe pollutants - for instance, carbon monoxide emissions are reduced by approximately 30%, and nitrogen oxide limits are much stricter, nearly twice as stringent as the previous China 4 standard. Vehicles are now equipped with better catalytic converters to reduce particulate matter and hydrocarbon emissions, which genuinely helps improve air quality. I remember when driving older cars, urban smog was severe, but since implementing China 5, there's noticeably less exhaust odor on roads with visible air quality improvements. Daily driving also feels more reassuring as traffic restriction policies have loosened somewhat, making car travel more convenient. Overall, this standard not only addresses environmental needs but also enhances our quality of life - it's essential to verify the emission standard label when buying a car.
Was this review help?
11
1
Share
Expand All
OmarFitz
10/11/25 7:29am
As someone who has long been concerned about the environment, I truly believe the China V emission standard is a significant step forward. It mandates vehicles to reduce emissions of multiple harmful gases, such as strictly controlling nitrogen dioxide and carbon monoxide, thereby cutting down sources of smog. During new vehicle testing, the emission limits are more stringent, forcing automakers to improve engine technology. This leads to cleaner urban air and better respiratory health protection. I've also noticed that since the standard's implementation, more manufacturers have shifted toward cleaner technologies, even accelerating the development of electric vehicles. In daily life, driving a China V-compliant car means noticeably lighter exhaust fumes, allowing us to enjoy driving while protecting nature. Persisting with these standards can help us build a greener home.
Was this review help?
13
3
Share
Expand All
DiEsther
11/24/25 8:36am
Having worked in the auto repair industry for a long time, the China V emission standards have led to upgrades in vehicle emission systems. The core focus is reducing CO and NOx emissions, with stricter emission testing. Gasoline vehicles now use advanced three-way catalytic converters, while diesel vehicles are equipped with DPF to filter particulate matter. The exhaust treatment systems have become more complex, but they effectively reduce pollution. When driving daily, it's important to avoid using low-quality fuel and to check the filters during maintenance.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How to Operate the Gear Shifts on a Volvo S60?

Press the foot brake, then directly shift the gear lever to the P (Park) position. This is the parking gear, which locks the transmission's power output and can also prevent the car from rolling on a slope. With the foot brake pressed, shift to the R (Reverse) gear, then slowly release the foot brake to start reversing. Observe the rearview mirror and the reversing camera, adjust the steering wheel, and do not press the accelerator. Press the brake and shift to the D (Drive) gear. This is the driving gear, where the transmission provides forward power, commonly used for daily driving. The S (Sport) gear is a variant of the D gear, standing for Sport mode. It can be engaged at any time, similar to shifting to other gears. The L (Low) gear is also a variant of the D gear, mainly used for uphill or downhill driving, as well as on snowy, icy, or muddy roads. In low gear, the car outputs stronger torque.
6
3
Share

How to Deal with Water Leaking into the Car Window?

First, remove the accumulated water inside the car. There are several drainage holes at the bottom of the vehicle chassis, which are sealed with rubber plugs. Removing these rubber plugs can help drain the water from the cabin. Use a dry and clean towel to gently wipe off water droplets from the dashboard and seats. If there is significant water accumulation, it is advisable to remove the floor mats to facilitate drying. Turn on the air conditioning and adjust the vehicle's circulation switch to the internal circulation mode, allowing the water vapor inside the cabin to be quickly expelled through the air conditioning system. If the water leakage is due to the window not being properly closed, skip this step. If the window is tightly closed but still leaks, check whether the window rubber seals have aged and replace them if necessary.
8
2
Share

What is the best method for repairing rust on car sheet metal?

If the rust appears on the surface and the area is small, you can use water sandpaper to grind off the rust, then perform touch-up painting, and finally spray a layer of rust-proof paint. If the rust is severe with large areas of paint peeling, it is necessary to completely scrape off the rusted paint, then fill and level with putty. After the putty hardens, proceed with repainting. If the car sheet metal is rusted through, the rusted part should be cut out and re-welded, followed by touch-up painting and spraying. If the damaged area is too large, repair is not recommended; it is better to replace the entire panel.
19
4
Share

What are the solutions for high fuel consumption in the ninth-generation Civic?

Check the tire pressure and wear condition. If the tire pressure is too low, it will increase the friction between the tires and the ground, resulting in greater running resistance and higher fuel consumption. Carbon deposits in the engine ignition system and intake system will cause incomplete combustion and increased fuel consumption. Use the method of intravenous cleaning to remove carbon deposits from various parts. Personal driving habits are closely related to fuel consumption. Pay attention to developing good driving habits, such as avoiding sudden acceleration, frequent starts, and aggressive driving. Follow the manufacturer's requirements for regular vehicle maintenance. Timely replacement of engine oil, three filters, and other wear-prone parts can keep the vehicle in good working condition and reduce fuel consumption.
17
5
Share

What Are the Solutions for a Car Not Starting After Refueling?

Use a multimeter or voltmeter to measure the voltage across the battery terminals and check if it is normal. If the voltage is below the required value, you can start the car by jump-starting. Check if the steering wheel is in a locked state. Generally, by turning the steering wheel forcefully while turning the key, the steering wheel lock can be quickly released. When starting an automatic transmission car, ensure the gear is in P (Park) or N (Neutral). If it is in R (Reverse) or D (Drive), the car will not start, and you must also press the brake pedal. If there is a fault in the high-voltage power supply circuit of the ignition system, it will prevent the spark plugs and ignition coils from functioning. Check if the circuit at this location is unobstructed.
8
0
Share

What is the remote key matching method for Geely King Kong?

Insert the key into the ignition switch, and within 7 seconds, repeatedly switch from OFF to ON three times consecutively. On the third time, leave the key in the ON position. At this point, observe that the anti-theft indicator light (red LED) will flash rapidly for 3 seconds, then pause for 1 second. When the anti-theft indicator light lights up again and then goes off, turn the key from ON→OFF→ON. At this time, the horn will sound once, indicating that the learning mode has been entered. Press any button on the remote control in sequence to learn, with a press time greater than or equal to 2 seconds. The horn will sound once, indicating that the learning is complete.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.