What are the requirements for the photo on a driver's license?

What is the best location to install an ETC device?

For small cars, the ETC device is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be at a height of no less than 1.2 meters and no more than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have it installed later, which may affect the signal transmission of the microwave communication link, the device should be installed in the microwave skylight zone. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for it, you need to provide the original and photocopy of the vehicle owner's valid ID and driving license. If the application is not made by the owner, the agent's valid ID is also required. The photocopy of the driving license should include the page with the most recent annual inspection seal. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large backward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic payment for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and cause payment failure. When using a debit card bound to ETC, insufficient balance will also lead to payment failure.

10

5

Share

What is the battery model for the Mercedes GLE key?

The battery models are CR2032 and CR2025-3v. These are lithium manganese dioxide batteries, named according to the IEC standard. Among them: C - indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - indicates that the battery shape is cylindrical; if it is square, F is used instead; 20 indicates the battery diameter is 20mm; 32 represents the battery height of 3.2mm; 25 represents the battery height of 2.52mm; The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is around 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal usage conditions (sealed, room temperature, no moisture interference, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the lifespan will be. If the remote key battery runs out, the mechanical key can be used directly to unlock and start the vehicle. The batteries used in car remote keys are button cells, mainly including models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used car remote batteries. The battery voltage is 3V, while most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include: Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button-type CR2032 battery: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence the name button lithium battery or lithium manganese button battery. Button-type CR2450 battery: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value for CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, such batteries can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound production, and RF output.

20

5

Share

Why Does a Car Consume More Fuel in Summer?

Summer fuel consumption in cars is often due to issues with spark plugs or ignition coils. Here are specific reasons for increased fuel consumption in summer: 1. Noticeable heaviness while driving: Underinflated tires can increase fuel consumption. Also check the tire wear level - severely worn tires frequently cause slippage, leading to higher fuel consumption. 2. Problems with spark plugs or ignition coils: Extended use of spark plugs may result in increased fuel consumption as damaged spark plugs reduce ignition energy, significantly raising gasoline consumption.

11

1

Share

What are the effects of exhaust pipe flexible joint leakage?

Exhaust pipe flexible joint leakage has the following effects: 1. If the leakage is in front of the muffler, it will increase engine noise; 2. If it is in front of the three-way catalytic converter, it will affect the quality of exhaust emissions, possibly causing the vehicle to fail inspection. An engine is suitable for power generation devices and can also refer to the entire machine including the power device (such as gasoline engines, aircraft engines). The exhaust pipe is part of the engine exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Generally, the three-way catalytic converter that controls engine pollutant emissions is also installed in the exhaust system. The exhaust pipe usually includes the front exhaust pipe and rear exhaust pipe.

5

Share

What type of battery does the Tesla Model 3 use?

Tesla Model 3 uses lithium-ion ternary batteries and lithium iron phosphate batteries. Here are detailed introductions about Tesla: 1. Overview: Tesla Motors generally refers to Tesla. Tesla is an American electric vehicle and energy company that manufactures and sells electric vehicles, solar panels, and energy storage equipment. Its headquarters is located in Palo Alto. 2. Others: Tesla's first car product was the Roadster, released in 2008, which was a two-door sports car. The second car product was the Model S, released in 2012, which was a four-door all-electric luxury sports sedan. The third car product was the Model X, a luxury all-electric SUV.

11

4

Share

Is a physical examination required for driver's license renewal now?

Driver's license renewal requires a physical examination. Here are the specific requirements for the physical examination for driver's license renewal: 1. Height: The height must be 150 centimeters or more. 2. Vision: For applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other types of driving licenses, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 3. Physical condition: The body must be sound, without disabilities, infectious diseases, or red-green color blindness.

9

2

Share

What are the requirements for the photo on a driver's license?

What is the best location to install an ETC device?

What is the battery model for the Mercedes GLE key?

Why Does a Car Consume More Fuel in Summer?

What are the effects of exhaust pipe flexible joint leakage?

What type of battery does the Tesla Model 3 use?

Is a physical examination required for driver's license renewal now?

What is the engine model of the Subaru Impreza?

How to Check the Remaining Points on a Driver's License?

Can I Book the Subject 2 Test by Myself?

What is the Difference Between Jiakao Baodian and Jiakao Yidiantong?