What are the requirements for straight-line driving?

How to Solve Engine Piston Slap?

Engine piston slap can be resolved by the following methods: 1. If knocking sounds occur in low-temperature environments after starting the car and disappear as the temperature rises, this type of piston slap can be temporarily ignored, and driving can continue; 2. If the knocking sounds persist or become more pronounced after the engine reaches normal operating temperature, the driver should avoid high-speed driving, stop to inspect promptly, and prevent potential traffic accidents; 3. If severe cylinder ovality, scoring, or excessive clearance between the piston and cylinder is found after removing the cylinder head and extracting the piston, replacement is necessary—replace the cylinder liner, piston, and piston rings; 4. If connecting rod deformation is detected, replacement is strongly recommended.

14

2

Share

What is the appropriate mileage for a car's first maintenance?

The first maintenance for a car is appropriate at 5,000 kilometers. The first maintenance includes: 1. Changing the engine oil, oil filter, and cleaning the air filter, checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying whether all switches and lights in the car are working properly. Precautions for the first maintenance are: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.

4

2

Share

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission?

The reasons for the clicking sound when shifting gears in an automatic transmission are: 1. Issues with the generator gear; 2. Large valve clearance and poor lubrication when the engine is cold; 3. Transmission failure; 4. The car was not completely stopped when shifting gears. Precautions for shifting gears in an automatic transmission car: 1. Do not press the accelerator pedal when shifting gears; 2. Do not press the accelerator pedal hard after engaging a gear; 3. The vehicle can only be started in P or N gear; 4. The brake must be pressed to remove the gear lever from P gear; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the car is moving; 7. When changing the direction of travel, switching between D and R gears must be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the temperature of internal transmission components to rise and lead to damage.

18

2

Share

How to Turn on the High Beam on the Mazda6 Atenza?

The method to turn on the high beam on the Mazda6 Atenza is: 1. Turn on the light switch; 2. Locate the light control lever; 3. Rotate the light change control lever outward. Taking the 2020 Mazda6 Atenza as an example, it is a mid-size car with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm, a minimum ground clearance of 162mm, and a curb weight of 1518kg. The 2020 Mazda6 Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158ps, a maximum torque of 202Nm, and a maximum power of 116kW, paired with a 6-speed automatic transmission.

5

2

Share

Is Jetta a Joint Venture Car?

Jetta is a joint venture car, a brand under FAW-Volkswagen Automotive Co., Ltd., which is a joint venture of the German Volkswagen Group in China. Taking the 2020 Jetta as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.

15

1

Share

Where is the Chevrolet trunk switch located?

The Chevrolet trunk switch is located on the door trim panel in the main driver's cabin. Chevrolet models include: Chevrolet Cavalier, Chevrolet Equinox, Chevrolet Monza, Chevrolet Orlando, Chevrolet Malibu XL, etc. Taking the 2021 Chevrolet Cavalier as an example, it is a compact car with body dimensions of: length 4474mm, width 1730mm, height 1471mm, and a wheelbase of 2600mm. The 2021 Chevrolet Cavalier is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, maximum torque of 180Nm, and maximum power of 92kW.

14

2

Share

What are the requirements for straight-line driving?

How to Solve Engine Piston Slap?

What is the appropriate mileage for a car's first maintenance?

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission?

How to Turn on the High Beam on the Mazda6 Atenza?

Is Jetta a Joint Venture Car?

Where is the Chevrolet trunk switch located?

What is the tire brand of Toyota Corolla?

Where is the production location of the NIO ES6?

How to turn off the auto start-stop function in XTS?

How often should the Dongfeng Fengguang 580 be serviced?