···
Log in / Register

How to turn off the auto start-stop function in XTS?

6Answers
McMadison
07/28/2025, 09:47:05 AM

The method to turn off the auto start-stop function in XTS is to press the auto start-stop button. Taking the 2018 XTS as an example, it is a mid-to-large-sized car with body dimensions of: length 5103mm, width 1852mm, height 1502mm, wheelbase of 2837mm, minimum ground clearance of 127mm, and a body weight of 1840kg. The 2018 XTS features a front McPherson independent suspension and a rear multi-link independent suspension, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 269PS, maximum torque of 353Nm, and maximum power of 198kW.

Was this review help?
105
Share
DiCorey
08/11/2025, 02:22:44 PM

Turning off the auto start-stop feature on the Cadillac XTS is really simple. I've found that after starting the vehicle each time, just locate a small button marked with an "A" or "Auto Stop" on the center console, press it lightly, and when the indicator light turns on, it means the function is deactivated. I often do this myself while driving, especially in urban traffic jams where the frequent engine restarts feel uncomfortable and make me worry about additional battery strain. Actually, the auto start-stop system saves fuel by automatically shutting off the engine when stationary, but sometimes the restart vibration can be annoying. In the long run, disabling it might slightly benefit engine lifespan—anyway, I haven't saved much on fuel costs with this feature enabled. If you're unsure about the button's location, checking the owner's manual or online videos will provide detailed guidance. I recommend beginners try it directly to avoid issues when instant acceleration is needed.

Was this review help?
1
Share
Expand All
IslaRose
09/28/2025, 10:29:09 PM

Turning off the Auto Stop feature in the Cadillac XTS is quite convenient. After starting the vehicle, look near the instrument panel for a round button labeled "Auto Stop"—just press it once. The system automatically shuts off the engine when stopped to save fuel, but I've encountered situations where the engine restarts too frequently, especially on wet roads where battery stress is higher. Frequent engine shutdowns and restarts theoretically increase wear, which is why I often disable it. This feature is more common in hybrid vehicles, but it's well-implemented in the XTS. If the button doesn't respond, check the battery status or visit a service center for adjustments. Once turned off, the setting remembers user preferences, so you don’t need to disable it every time you start the car. Personally, I find the fuel-saving effect of Auto Stop limited, especially on short trips. Keeping it off reduces hassle and minimizes engine noise. I might enable it on highways for occasional use, but in city traffic, manually turning it off feels more reliable.

Was this review help?
14
Share
Expand All
Vivienne
11/11/2025, 11:24:39 PM

Turning off the auto start-stop feature on the Cadillac XTS is incredibly easy. After starting the car, simply locate the 'A' button on the center console and press it to illuminate, which deactivates the system. I frequently do this when driving my kids to and from school to prevent the engine from repeatedly restarting, as they complain about the noticeable vibrations. While auto start-stop is beneficial for reducing fuel consumption and protecting the environment, frequent engine restarts can strain the battery. The system is intuitively designed—just a quick press does the trick. If you're unsure of the button's location, check behind the steering wheel or near the glove compartment. I make it a habit to periodically review my vehicle settings to ensure stable functionality. Similar features are common in newer cars, and disabling it won’t affect the air conditioning or audio system, maintaining a quieter cabin for comfort. Forgetting to turn it off occasionally is no big deal—safe driving always comes first.

Was this review help?
14
Share
Expand All
LilaDella
01/02/2026, 01:05:28 AM

To disable the Auto Stop feature on the Cadillac XTS, simply press the button labeled 'Auto Stop' after starting the vehicle – it's prominently located in the control panel. Having driven this car for several years, I find the engine auto start-stop function somewhat redundant, especially during elderly-paced driving where the delayed restart feels risky. Deactivating it is a one-button operation, extremely simple and requires no technical expertise. While auto stop-start has fuel-saving advantages during idling, it may increase battery strain and affect longevity. I usually keep it off for short trips for peace of mind, occasionally enabling it to test fuel efficiency. If the button malfunctions, visit a professional shop for circuit adjustment – never attempt DIY disassembly. The system is generally reliable, but disabling it prevents unexpected activations. Familiarize yourself with the owner's manual's option settings to develop smoother driving habits.

Was this review help?
14
Share
Expand All
JadeLynn
03/30/2026, 02:05:18 AM

Turning off the Auto Stop feature in the Cadillac XTS is straightforward—simply press the "Auto Stop" button after starting the engine. The system shuts off the engine at traffic lights to save fuel and reduce emissions, but sometimes battery stress can cause delayed restarts, which can be frustrating. When driving this car in congested urban areas, I often disable it to protect the engine and minimize wear. The operation is intuitive—just check for the illuminated indicator light—and it doesn’t affect other electronic devices. Auto Stop is an eco-friendly innovation, but frequent use may negatively impact engine temperature fluctuations. It’s advisable to toggle it flexibly based on road conditions: enable it on highways for fuel efficiency and disable it in the city for stability. Keeping it off long-term won’t harm the vehicle; in fact, it may enhance reliability. Regular maintenance and electrical system checks ensure everything functions properly.

Was this review help?
17
Share
Expand All
More Q&A

What Causes the Abnormal Sound When Starting but Fails to Ignite?

If the car makes a clicking sound when starting but fails to ignite, it could be due to starter motor issues, insufficient battery power, or low voltage. Starter Motor Issues: When turning the key results in a clicking sound but the engine doesn't start, the clicking noise is either from the relay or the starter motor. This indicates that the starter motor has responded but lacks the power to turn the flywheel, preventing the car from starting. Insufficient Battery Power: A clicking sound when the car fails to start might be caused by insufficient battery power. Leaving headlights on when parked or connecting too many external devices can drain the battery. Low Voltage: Low voltage can also cause the car to make a clicking sound when failing to start. This could be due to an old battery that has degraded over time, reducing its charge capacity, or using the car's audio system or air conditioning without starting the engine.
103
Share

What is the reason for the Mitsubishi Elevator 89 light not lighting up?

The reasons why the Mitsubishi Elevator 89 light does not light up are as follows: The elevator safety circuit is not connected: The 29# indicator is abnormal, and the 89# light-emitting diode cannot light up normally. Sometimes the 89 light goes out and immediately lights up again, which may be a problem with the safety circuit. Upper and lower limit switches: Check whether the upper and lower limit switches are normal, whether the wiring is correct, and whether there is any broken skin or grounding in the circuit. Temperature fuse burned out: The 89 light also cannot light up. You can check the white ceramic block (temperature fuse) on the power board and measure whether the continuity of the AB terminals of the temperature fuse is normal. Brake gap is too small: After long-term operation, the friction of the main traction wheel is too high, the main motor temperature rises, and the brake temperature is too high to detect. The elevator self-protects, causing the elevator to freeze, and the fast and slow cars cannot start (unless reset or powered off). Although the 89# light may not necessarily go out in this case, it is also a manifestation of abnormal operation of the 89 relay.
104
Share

What Type of Tires Are Suitable for Desert Off-Roading?

For terrains like deserts that demand higher tire traction, it is generally recommended to use specialized sand tires. These tires are specifically designed for desert off-roading, offering wear resistance and high-temperature tolerance. They feature large chevron tread patterns and deeper tread depths compared to regular off-road tires. If specialized sand tires are unavailable, all-terrain tires are also a good alternative. Below is additional information: 1. When selecting tires for desert off-roading vehicles, it's important to consider not only the tread pattern and brand but also the tire specifications (letters on the tire surface) and wheel parameters (ET and J values—the former relates to wheelbase and affects turning, while the latter indicates wheel width and affects installation). Proper tire maintenance during use is also crucial. 2. Off-road tires perform well under low-pressure conditions, especially in deserts. It is advisable to reduce tire pressure to around 1.0 BAR to enhance the tire's enveloping characteristics. Therefore, it's essential to carry a tire deflator and an air pump when driving in deserts.
105
Share

What is the emergency rescue number on the highway?

In most provinces across the country, the emergency rescue number is 12122, with slight variations in different cities and provinces. Vehicle owners can dial 12122 for assistance in case of accidents or emergencies on the highway. In addition to the nationwide unified emergency number, different provinces may have their own specific service hotlines. Additional information: 1. 12122 is the national highway emergency rescue number, which is completely non-profit and can only be used with approval from the Communications Administration. It is intended for reporting emergency highway accidents. Additionally, 12328 is a supervision service number, and 122 is the accident reporting number. 2. When encountering a road traffic accident, you should dial 122 to report the incident. The correct way to make the call is as follows: Stay calm when dialing the traffic accident emergency number, and only dial 122 after hearing the dial tone. After connecting, confirm with the operator that you have reached 122 to avoid misdialing. Clearly state the location, position, and time of the accident, as well as key details such as casualties, to ensure a prompt response and timely medical assistance. Answer the operator's questions calmly and provide your name and phone number to maintain contact.
105
Share

How far can the Wuling Hongguang S travel after the fuel gauge light comes on?

When the fuel gauge light of the Wuling Hongguang S comes on, it can generally travel an additional 20-50 kilometers. However, due to different road conditions and driving habits, the actual remaining mileage can vary significantly. Therefore, it is crucial to refuel as soon as possible after the fuel gauge light appears. When the fuel gauge light is on, it is advisable to turn off electrical appliances such as the air conditioning and maintain a steady speed while avoiding sudden braking. Below is more information about the Wuling Hongguang S: Power: The Wuling Hongguang S is equipped with two engines, the P-TEC 1.2L and 1.5L, designed and manufactured according to General Motors' global powertrain standards. Both engines feature a double overhead camshaft (DOHC) design, which is relatively rare in small-displacement engines. These engines ensure robust power while also demonstrating excellent fuel efficiency, significantly reducing vehicle operating costs. Exterior: The upper grille is highlighted by a single wide horizontal bar with chrome trim, resembling the latest family design language of General Motors' Chevrolet models.
103
Share

What Causes Blue Smoke During Cold Engine Start?

The reasons for blue smoke during cold engine start are: 1. The use of unqualified engine oil or failure to change the oil for an extended period: This leads to overly thin engine oil, resulting in incomplete combustion and the appearance of blue smoke. 2. Poor quality of the air-fuel mixture participating in combustion: Caused by aging or damaged air filters that have not been replaced. 3. Severe wear of the valve guides and valves during operation: This creates excessive clearance between them, allowing excessive oil from the rocker arm chamber to be sucked into the combustion chamber during the intake process, leading to the production of blue smoke. Here is some additional information: 1. Introduction and types: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. 2. Applications and history: Engines can refer to both power-generating devices and the entire machine including the power unit. The engine was first developed in the UK, so the concept of an engine also originates from English, with its original meaning referring to "a mechanical device that generates power."
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.