What are the requirements for gear shifting in Subject 3?

[LeAdalynn]

Subject 3 gear shifting speed requirements are as follows: 1. Follow examination requirements: Perform corresponding gear shifting operations based on the voice prompts from the examination system. 2. Upshifting technique: When upshifting, the action should be swift and gentle, with accurate gear selection. Do not look down at the gear lever or coast in neutral. Before upshifting, check the left and right rearview mirrors to ensure road safety, release the throttle with your right foot, press the clutch with your left foot, engage the appropriate gear, then slowly release the clutch while gently pressing the throttle to accelerate. 3. Downshifting technique: Before downshifting, check the left and right rearview mirrors to ensure road safety. For example, when downshifting from 3rd to 2nd gear, release the throttle (or apply the brake) at 30 km/h, allowing the speed to gradually decrease to 20 km/h before shifting to 2nd gear. 4. Gear and speed matching: Maintain proper gear and speed matching during driving. Use 1st gear at 0-10 km/h, 2nd gear at 10-20 km/h, 3rd gear at 20-30 km/h, and 4th gear at 30-40 km/h.

[KaiFitz]

I remember when I was learning to drive and taking the third subject test, there was quite a bit of nuance in shifting gears. Upshifting involves accelerating to around 20 km/h before shifting to 2nd gear, and around 30 km/h for 3rd gear—not too early or too late, otherwise, it could cause lugging or waste fuel. Downshifting means shifting to a lower gear before decelerating, such as shifting down before going downhill to use engine braking and save the brakes. The test focuses on smooth gear changes without jerking, quick and steady hand movements to avoid losing control of the steering wheel, and checking the mirrors to observe road safety. The examiner deducts points for jerky shifts or failing to check the road. I usually practice more on open roads to familiarize myself with my car's shifting rhythm, making the movements natural and smooth for safer and more comfortable driving. In short, timing and coordination are key, and practice makes perfect.

[SanAllie]

I just passed the Subject 3 driving test and have deep understanding of gear shifting requirements. For upshifting, you must increase speed before changing gears - for example, shift from 1st to 2nd gear only when reaching 15km/h to ensure smooth transition without jerking. Downshifting requires gradually lowering gears while decelerating, avoiding sudden shifts at crowded intersections that cause vehicle shudder. During the test, the examiner closely monitored gear change smoothness - quick movements while keeping the steering wheel steady without freewheeling, always checking side mirrors before and after shifting to ensure no vehicles or pedestrians are approaching. Deduction points included improper gear change timing or distracted looking down. I spent time practicing various road conditions at the training ground to find that gentle feeling, and successfully passed by getting the rhythm right.

[HazelAnn]

I think the basic requirements for gear shifting in Subject 3 are: upshift when the speed is sufficient, such as shifting up at 25km/h, and downshift smoothly before decelerating without skipping gears. The test focuses on smooth gear changes without clunking sounds, quick hand movements while keeping eyes on the road. Glance around before and after shifting to ensure safety and avoid blind spots. Avoid mistakes like jerky gear shifts that lead to point deductions during the test. Practice more to get familiar with gear positions and handle it well.

[LeDamian]

I carefully pondered the key points of gear shifting in Subject 3. Upshifting requires speed matching, such as shifting to 2nd gear at 20km/h to avoid lugging the engine. Downshift promptly when anticipating risks, like descending a slope, to prevent loss of braking control. The exam focuses on smooth and swift gear changes with steady steering while observing the dashboard or rearview mirror. Points are deducted for jerky shifts, gear noise, or failing to prevent gear skipping by shifting in sequence. During practice, pay attention to 'steady clutch release and throttle control' to minimize jerking. Mastering these details ensures a worry-free exam.

[TuckerFitz]

I believe gear shifting in Subject 3 emphasizes safety the most. Getting distracted by looking at the gear position while shifting can easily cause accidents, requiring instant completion while keeping eyes on the road and hands moving quickly. When upshifting, wait until the speed exceeds 20km/h to prevent lugging the engine. For downshifting, anticipate in advance, such as downshifting for traffic lights to prevent rolling. The examiner evaluates smoothness and safety awareness. I'm accustomed to planning shift points early to make driving more stable, practicing more to eliminate potential hazards.