What are the regulations for driver's license downgrading?

1 Answers
DiAliyah
07/30/25 5:13am
Driver's license downgrading regulations: For drivers holding licenses for large buses, tractors, urban buses, medium buses, or large trucks, the vehicle management office shall revoke their highest permitted driving class under the following circumstances and notify the driver to complete the downgrade and license replacement procedures within 30 days. Being involved in a traffic accident resulting in death, bearing equal or greater responsibility, without constituting a crime. Accumulating 12 penalty points within one scoring cycle. Failing to participate in the review for three consecutive scoring cycles. If the driver fails to complete the downgrade and license replacement procedures within the specified time, the vehicle management office shall announce the revocation of the permitted driving class as invalid. After completing the downgrade and license replacement procedures, if the driver applies to reinstate the revoked driving class, they must not have accumulated 12 penalty points in the current scoring cycle and the most recent scoring cycle before application, nor have been involved in a traffic accident resulting in death with equal or greater responsibility. Procedure for downgrading and license replacement after revoking the highest permitted driving class: After passing the relevant examination, receive the "Feedback Notice of Illegal Full-Point Examination for Motor Vehicle Drivers" (for Class A and B licenses, downgrade information will be noted on the notice). After the suspension period ends, present the ID card and the "Feedback Notice of Illegal Full-Point Examination for Motor Vehicle Drivers" to the traffic police team where the license was confiscated to retrieve the driver's license. Submit the following materials to the issuing vehicle management office for downgrade and license replacement (processed within one working day if there are no pending traffic violations): Original "Motor Vehicle Driver's License Application Form". Original and copy of the driver's identity proof. Original motor vehicle driver's license. Three recent front-facing, bareheaded, white-background color ID photos (submit the digital photo collection receipt if required by local regulations).
Was this review help?
4
5
Share
More Forum Discussions

How to Use Cruise Control in the Jeep Compass?

First, press the cruise button located above the right side of the steering wheel. After adjusting to the desired speed, press the decel/set button to activate the cruise control function. More details are as follows: 1. ON/OFF Button – Cruise control switch. (1) Function 1: When the ON/OFF button is pressed, the CRUISE/MAIN indicator light above the coolant temperature gauge will illuminate. The cruise control system is activated and ready to receive speed control commands. (2) Function 2: Pressing the ON/OFF button again will turn off the CRUISE/MAIN indicator light and deactivate the cruise control system. 2. SET/COAST Button – Speed setting/deceleration control switch (allowed when speed exceeds 30 km/h). (1) Function 1: While driving, pressing the SET/COAST button will set the current speed, and the CRUISE indicator light above the coolant temperature gauge will illuminate. Release the accelerator to maintain the set speed. (2) Function 2: During cruise control, pressing the SET/COAST button again will decrease the speed by 1.6 km/h each time. (3) Function 3: Holding down the SET/COAST button during cruise control will gradually reduce the speed. 3. RES/ACCEL Button – Acceleration setting/acceleration control switch (allowed when speed exceeds 30 km/h). (1) Function 1: During cruise control, pressing the RES/ACCEL button will increase the speed by 1.6 km/h each time. (2) Function 2: Holding down the RES/ACCEL button during cruise control will continuously increase the speed. (3) Function 3: Pressing the CANCEL button during cruise control will temporarily pause the cruise function. Pressing the RES/ACCEL button again will rapidly accelerate the vehicle back to the previously set cruise speed.
16
5
Share

What system does ETC on highways refer to?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. Highways are equipped with one or more ETC lanes. ETC payment method: Through microwave-specific short-range communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, the system uses networked technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through bridge toll stations without stopping to pay tolls. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license must include the page with the most recent annual inspection stamp. Postal credit card application form, which is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated postal outlet to receive and install the ETC vehicle-mounted device for free, with no additional charges. Must be between 18 and 60 years old. Must own a vehicle under personal name. Below are precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply angled windshield, which can reduce the driver's field of vision. If ETC installation does not consider this, it may increase blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, avoid installing it on the blackened area of the windshield or where the solar panel might be blocked. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to an ETC service point for unlocking. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle ahead from malfunctioning, maintain a distance of more than 10 meters to avoid automatic payment for the vehicle ahead. The ETC lane recognition speed is 20 km/h; excessive speed may cause failure to read the vehicle's device information, leading to payment failure. When using a debit card to bind ETC, insufficient balance may also cause payment failure.
11
0
Share

Can You Turn Right at a Red Light?

There are three scenarios where vehicles can turn right at a red light, as detailed below: Circular Traffic Light: No sign prohibiting right turn on red: Observe the traffic and pedestrian conditions. If it does not affect other vehicles or pedestrians, you may proceed. Sign prohibiting right turn on red: Right turns are not allowed. Arrow-shaped Right Turn Signal: If you encounter an arrow-shaped right turn signal at an intersection, you cannot turn right when the red arrow is lit. Turning right in this case will be considered running a red light. Laws and Regulations: According to the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China," motor vehicle and non-motor vehicle traffic signals indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not impede the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians. According to the "Road Traffic Safety Law," the regulations on traffic signals are as follows: Article 25, Paragraph 2 states that traffic signals include traffic lights, traffic signs, traffic markings, and the directions of traffic police. Article 26 states that traffic lights consist of red, green, and yellow lights. Red means stop, green means go, and yellow means caution. Article 38 states that vehicles and pedestrians must follow traffic signals. When directed by traffic police on-site, they must follow the police's directions. On roads without traffic signals, they should proceed under the principle of ensuring safety and smooth traffic. Article 62 states that pedestrians crossing intersections or roads should use crosswalks or pedestrian facilities. At intersections with traffic signals, they must follow the signals. At intersections without signals or crosswalks, or when crossing roads without pedestrian facilities, they should proceed only after confirming safety. Article 89 states that pedestrians, passengers, or non-motor vehicle drivers violating road traffic safety laws or regulations will be given a warning or fined between 5 and 50 yuan. Non-motor vehicle drivers who refuse to pay the fine may have their vehicles confiscated. Driving a motor vehicle in violation of traffic signals will result in a 6-point penalty. Right Turn Precautions: Observe oncoming straight-moving vehicles: When turning right, check both the right and left sides for traffic. Watch for left-turning vehicles from the opposite direction: In addition to straight-moving vehicles, be aware of any left-turning vehicles from the opposite side. When turning right, yield to vehicles on the left, whether they are turning left or going straight. Watch for pedestrians: When turning right, be mindful of pedestrians on crosswalks, both before the intersection and at the corner.
13
2
Share

Is the Camry 2.5 engine imported or domestically produced?

The Camry 2.5 engine is a domestically produced engine, manufactured by Tianjin FAW Toyota Engine Co., Ltd. The Camry 2.5 engine model is A25A, with a maximum power of 154kw, maximum horsepower of 209Ps, and peak torque of 250Nm. For daily maintenance of the Camry 2.5 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
13
1
Share

Why Does the Mercedes Remote Key Fail?

Mercedes remote key failure is due to damage to the transmitter inside the remote key, resulting in incorrect signal transmission. Additional Information: Here are some car key maintenance tips: 1. Temperature: Do not expose the key to extremely cold environments below 0°C or extremely hot environments above 50°C, as this will significantly reduce battery life. 2. Dry Environment: Keep the key in a dry environment, as a humid environment can decrease battery life. 3. Prevent Scratches: Avoid placing the key with hard objects, as this can scratch the chrome plating on the key.
20
3
Share

What brand of car is Neta?

Neta is the brand name of Hozon Auto, which was established on June 1, 2018, and is owned by Zhejiang Hozon New Energy Automobile Co., Ltd. The brand is a smart electric vehicle brand, with a development philosophy focusing on electrification, intelligence, and connectivity, aiming to create cost-effective electric vehicles. The following is some relevant information about Hozon Auto: 1. The length of the Neta U pure electric SUV model is 4530 mm, the width is 1860 mm, the height is 1628 mm, and the wheelbase is 2770 mm. 2. The vehicle's battery type is a ternary lithium battery, matched with a permanent magnet synchronous motor, and the maximum torque of the vehicle is 210N.m.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.