···
Log in / Register

What are the reasons why the car throttle cannot be increased?

4 Answers
ZoeLee
08/29/25 4:45am

The reasons why the car throttle cannot be increased are: 1. Fuel line blockage; 2. Exhaust system blockage; 3. Excessive carbon buildup in the throttle. The throttle, also known as the air valve or throttle valve, refers to the control device that regulates engine power. The throttle position is manipulated by the driver in the cockpit via the throttle lever, transmitted through control system components such as rods, rocker arms, torque tubes, cables, pulleys, and sector gears to the carburetor or fuel regulator on the engine. The car's throttle pedal does not directly control the fuel injection volume but rather the throttle opening. When the throttle pedal is pressed, the throttle opening increases, allowing more air to enter the engine, which in turn prompts the fuel injection system to inject more fuel.

Was this review help?
13
5
Share
BryceLynn
09/11/25 2:33am

As a regular driver, I get anxious when the throttle doesn't respond. The most common issue is a problem with the fuel system, such as a malfunctioning fuel pump not delivering enough fuel or a clogged fuel filter preventing the engine from getting sufficient fuel. Air supply is also crucial; a dirty air filter filled with dust can restrict airflow, making the engine feel weak. Ignition system issues like worn spark plugs or faulty ignition coils can also cause misfires, leading to poor acceleration. Additionally, a faulty throttle position sensor or electronic control module can affect the computer's ability to precisely control speed. In such cases, don't push it—head to a repair shop immediately for inspection and part replacement to avoid accidents, especially at high speeds. Regular maintenance can significantly reduce these frustrations.

Was this review help?
15
5
Share
Expand All
EliAnn
10/25/25 3:21am

I enjoy doing my own car maintenance, and the issue of unresponsive throttle is worth investigating. First, check fuel-related problems: common issues include an aging fuel pump with insufficient pressure, fuel line leaks, or a clogged fuel filter. The ignition system should not be overlooked: spark plugs with excessive gaps or severe carbon buildup may fail to ignite, and loose ignition wires can also affect acceleration. A dirty throttle body with excessive carbon buildup obstructing airflow is a classic problem. Modern cars are highly electronic, so faulty sensors like the throttle position sensor or incorrect ECU signals are often the culprits. It's recommended to use an OBD scanner to read fault codes for accurate diagnosis before replacing parts. Regularly cleaning the throttle body and changing the engine oil can prevent such issues, ensuring smooth and safe driving.

Was this review help?
3
1
Share
Expand All
OBraxton
12/08/25 3:45am

As a beginner learning to drive, it's really nerve-wracking when the accelerator doesn't respond. Usually, it's because the air filter is too dirty and blocks the air intake, making the engine struggle to accelerate. Sometimes, a faulty fuel pump or clogged fuel filter prevents fuel from reaching the engine, and replacing the filter can solve the problem. Other issues like faulty spark plugs or a stuck throttle cable can also cause accelerator failure. Try cleaning or replacing the filter first, but if that doesn't work, visit a mechanic to avoid disrupting daily driving. Just remember to use quality fuel and stick to regular maintenance.

Was this review help?
4
2
Share
Expand All
More Forum Discussions

What lights should you turn on when driving in a heavy rainstorm?

When driving in heavy rain, turn on the headlights or front fog lights. Precautions for driving in rainy weather are as follows: 1. Turn on the wipers promptly; 2. If there is frost on the windshield, turn on the air conditioning and direct the cold air toward the windshield; 3. The driver should hold the steering wheel with both hands to maintain straight and low-speed driving, and brake gently to prevent the tires from locking up and causing the vehicle to skid; 4. Reduce the vehicle's speed, pay attention to the distance between the front and rear vehicles, and be mentally prepared to take emergency measures in advance. Car headlights, also known as car front lights or LED daytime running lights, should be maintained by: 1. Regularly checking the sealing of the headlights—if the sealing ring between the lens and reflector is damaged, replace it promptly; 2. Regularly cleaning the reflector—if it turns black and the brightness decreases, replace it; 3. Regularly removing dust and stains from the bulbs.
3
3
Share

What Causes Rough Gear Shifting in Automatic Transmissions?

Rough gear shifting in automatic transmissions may be caused by: transmission clutch pressure leakage; obstructed or sluggish transmission oil passages; insufficient or excessive transmission fluid levels; or damaged solenoid valves. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, transmissions with more gears tend to be more fuel-efficient. Below is relevant information: 1. Damaged solenoid valves: If sludge circulates within the transmission fluid and blocks the oil passages in the valve body, it can cause rough shifting. Over time, this can lead to a series of transmission issues such as overheating, impact, and slipping. 2. Incorrect transmission fluid levels: Verify whether the transmission fluid is at the standard level. Both insufficient and excessive transmission fluid can cause this issue. For vehicles equipped with a transmission dipstick, check whether the fluid level is within the standard range when the engine is running.
5
1
Share

Symptoms of a Faulty Thermostat in Jetta?

Jetta thermostat failure symptoms are as follows: 1. Thermostat malfunction with insufficient opening affects the engine's large and small circulation cycles, preventing effective heat dissipation and causing engine coolant temperature to rise; 2. Excessive thermostat opening leads to low engine coolant temperature, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking tends to cause carbon buildup, resulting in unstable engine idle speed and engine vibration. Below is how the thermostat works: 1. The thermostat is a valve controlling coolant flow path. It's an automatic temperature-regulating device typically containing temperature-sensing components that open/close air, gas or liquid flow through thermal expansion/contraction. 2. At normal temperature, the wax remains solid. When water temperature is below 76°C, the main valve closes completely while the bypass valve opens fully, allowing water from the cylinder head to directly enter the water pump via the bypass pipe (called small circulation). As water only flows between pump and water jacket without passing through the radiator and with small flow rate, the cooling intensity is weak.
14
3
Share

What Causes the Noise When Shifting Gears in an Automatic Transmission?

The reasons for noise when shifting gears in an automatic transmission are as follows: 1. Large valve clearance when the engine is cold: Poor lubrication can cause noise during gear shifting between cold and warm engine states, lasting about 3 minutes, but this is a normal phenomenon. 2. Issues caused by parking on a slope: If you engage the P (Park) gear before applying the handbrake when parking on a slope, the vehicle's weight will be entirely on the P gear due to inertia, leading to noise when shifting gears. However, if you apply the handbrake first, the handbrake will bear the weight, and no noise will occur. 3. Transmission problems: Wear and tear in the transmission, such as a loose driveshaft, worn differential, worn output shaft inside the transmission, worn transmission gears, or faulty shifting mechanism, require immediate attention. It is essential to visit a 4S shop or a professional auto repair shop for technician repairs.
19
5
Share

What are the vehicle warning lights?

There are ten main warning lights: 1. Oil pressure warning light: When illuminated, it indicates the engine oil level or pressure is below standard. Continued driving may cause severe engine wear due to lack of lubrication. 2. Coolant temperature warning light: Displays the temperature of the engine coolant. 3. Engine malfunction light: Shows the engine's operational status, typically in yellow. It lights up during ignition self-check and should turn off after starting. Persistent illumination indicates potential engine system issues. 4. Brake system warning light: If illuminated, first ensure the parking brake is fully released. If it remains lit, check brake fluid level or pad thickness. 5. Power steering warning light: Indicates malfunction in the power steering system. 6. Door/hood open warning light: Warns if doors or hood aren't properly closed. 7. Tire pressure monitoring light: Signals low tire pressure or possible tire damage. 8. Battery warning light: Usually yellow, it should turn off after self-check. 9. ABS warning light: Primarily yellow, failure to light during self-check or persistent illumination indicates potential ABS system faults. 10. Electronic stability control light: Normally indicates system deactivation when lit, and activation when off.
3
1
Share

Should the Foot Always Be on the Brake in an Automatic Transmission?

In an automatic transmission, the foot should not always be on the brake. It is best for the driver to keep the foot in the middle behind the brake and accelerator pedals. Below are specific details about the driver's foot placement: 1. Right Foot: The right foot should always be placed in the middle behind the brake and accelerator pedals. This makes it easier to step on the brake in case of an emergency and also facilitates acceleration. Tilting to the right is the accelerator pedal, while stepping straight down is the brake pedal. 2. Precautions: Do not use the left foot for braking and the right foot for acceleration, as this may lead to simultaneous pressing, wasting fuel and making operation difficult. 3. Correct Movement: The standard way to press the accelerator and brake is to pivot the heel of the right foot and rotate left or right to press, keeping the heel on the ground.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.