What are the reasons for the sudden heaviness of the steering wheel?

1 Answers
Easton
07/29/25 8:39pm
The reasons for the sudden heaviness of the steering wheel are: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power steering system; 4. Poor bearing lubrication. The working principle of the car steering wheel is to transmit torque to the rack and pinion mechanism, thereby pushing the wheels to turn left or right. The solutions for sudden heaviness of the steering wheel are: 1. Refill the power steering fluid; 2. Replace the circuit fuse; 3. Replace the flat bearing and replenish the kingpin grease; 4. Add lubricating oil to the steering tie rod ball joint. Steering wheels are categorized into: single-spoke steering wheel, dual-spoke steering wheel, three-spoke steering wheel, and four-spoke steering wheel.
Was this review help?
19
3
Share
More Forum Discussions

What causes the Audi to report an unreliable boost pressure signal?

Audi reports an unreliable boost pressure signal because the Audi 1.8T engine is a turbocharged intercooled engine. The intake pressure sensor is located between the intercooler and the throttle body: After passing through the air filter, air enters the compressor side of the turbocharger. At this point, the intake pressure is not the pressure entering the engine; it still needs to pass through the intercooler. After the air exits the intercooler, it enters the combustion chamber. Therefore, the intake pressure sensor is positioned between the intercooler and the throttle body. Function of the intake pressure sensor: The intake pressure sensor detects the absolute pressure in the intake manifold behind the throttle valve. Based on the engine speed and load, it detects changes in the absolute pressure within the manifold and converts this into a signal voltage sent to the electronic control unit (ECU). The ECU uses the magnitude of this signal voltage to control the basic fuel injection quantity.
20
2
Share

How many liters of engine oil does the Jaguar F-Type require?

The Jaguar F-Type requires 7.5 liters of engine oil. Below are the relevant details: Notes on adding engine oil: The Jaguar F-Type requires 7.5 liters of engine oil. You can follow the quantity specified in the maintenance manual. After the oil circulates, ensure the oil level is within the range marked on the dipstick. There is an oil dipstick on the exterior of the engine. When adding oil, it should be done appropriately, ideally to the middle mark on the dipstick. Introduction to the Jaguar F-Type: The Jaguar F-Type is a model under the Jaguar brand. Its body dimensions are 4470mm in length, 1923mm in width, and 1309mm in height, with a wheelbase of 2622mm. In terms of appearance, the Jaguar F-Type's bold grille conveys a sporty visual appeal. It also adopts the striking design language of the Jaguar XF and XJ sedan series, with modifications to suit a sports car. The slightly forward-leaning grille shape enhances its sleek and broad appearance, creating a sense of motion even when the vehicle is stationary.
4
1
Share

How is the performance of the Chery Tiggo 5x 1.5 naturally aspirated engine?

Chery Tiggo 5x 1.5 naturally aspirated engine performance is as follows: Performance-wise: The Tiggo-5x is equipped with a 1.5T turbocharged engine, paired with an Aisin 6MT and Getrag-DCT transmission. The combined fuel consumption is as low as 6.5L per 100km, with a thermal efficiency exceeding 37%, reaching internationally leading levels. The classic model Tiggo-5 still features a 1.5T turbocharged engine, with a maximum output of 152 horsepower and a peak torque of 205 Nm. The transmission system is matched with either a 5-speed manual or CVT gearbox. Among them, the CVT model has a combined fuel consumption of 7.7L per 100km. Differences: However, there are significant differences between the Tiggo-5 and Tiggo-5x. The Tiggo-5x targets young people with its distinctive and personalized appearance, along with some tech features favored by the younger generation. The Tiggo-5 maintains a more traditional style. Simply put, the 5x is sporty, while the 5X is more stable.
13
3
Share

Is it necessary to install an engine guard for the LaCrosse?

It is necessary to install an engine guard for the LaCrosse. Prevent damage to the engine or transmission oil pan: Even when driving in the city, there are times when you need to park by the roadside. Sometimes, in order to secure a parking spot, you have to drive onto the curb. During this process, it's easy to hit the engine or transmission oil pan. The engine guard provides protection: Whether visiting relatives and friends or going on a road trip, you might leave your hometown and drive on rural dirt roads or even mountain paths. On bumpy roads, it's even easier to damage the undercarriage. Therefore, installing an engine guard is necessary. The engine guard may now be full of holes, but fortunately, the engine itself remains untouched.
8
3
Share

What is the engine RPM of the Venucia T70 at 120 km/h?

When the Venucia T70 is traveling at 120 km/h, the engine RPM is normally around 3500. T70 engine power: When the T70 is driven by a single driver with no load on a straight highway at 120 km/h, the engine RPM is around 2100. The CVT transmission has very minimal power conversion and output loss for the engine, resulting in about 25% lower engine RPM compared to using an AT transmission at the same speed. T70 configuration: The Venucia T70 model is built on the same platform as the X-Trail and Qashqai, featuring several leading technologies unseen in its class, including the first use of the XTRONIC-CVT transmission, the first use of a true multi-link independent rear suspension, and the first to be equipped with a 3D panoramic monitoring imaging system and other intelligent features.
20
1
Share

Is the Prado noisy?

Prado is not noisy. High noise reduction capability: The Prado's excellent sound insulation and noise reduction capabilities are commendable. Its idle noise level is higher than that of the Pajero, possibly due to the noise meter capturing the low-frequency vibrations of the engine. However, in terms of subjective auditory perception, it performs better than the Pajero at all speed ranges, including idle. Noise sources: The Toyota Prado has multiple noise sources, such as the engine, transmission, drive axle, drive shaft, cabin, windows, tires, relays, horn, and audio system, all of which can generate noise. Some of these noises are passively generated, while others are actively produced (e.g., manually pressing the horn). However, the main sources come from two aspects: the engine and the tires.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.