What are the reasons for the parking brake system failure causing the car not to start?

1 Answers
SanRuby
07/24/25 5:14pm
The reasons for the parking brake system failure causing the car not to start are as follows: the brake light switch has a problem, causing the ECU to not receive the normal startup power signal. The parking brake is a device used to stabilize the vehicle after it has come to a stop, preventing accidents caused by the vehicle rolling on sloping roads. The operation method of the parking brake depends on the transmission type: 1. Manual transmission: When applying the parking brake, step down on the brake pedal and pull up the parking brake lever. When starting, step down on the brake pedal, slightly pull up the parking brake lever, press the button at the front end of the handle, and lower the parking brake lever completely. 2. Automatic transmission: After applying the parking brake, move the gear lever to the P position. When preparing to start, shift the gear lever to the drive position before releasing the parking brake.
Was this review help?
14
5
Share
More Forum Discussions

What is the size of the vehicle license photo?

The size of the motor vehicle license photo is 88mm in length, 60mm in width, with a corner radius of 3mm. Additional information is as follows: 1. Introduction: The motor vehicle license is the legal document that permits a motor vehicle to drive on roads within China. The license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the signed certificate core, while the back features the vehicle photo, which is sealed with a plastic cover. The supplementary page is the signed certificate core. 2. Verification: The license verification system can check and compare the authenticity of the motor vehicle, query vehicle information, and provide safety assurance for the owner. By simply entering the basic information of the motor vehicle into the system, one can verify whether the vehicle is genuine. If the information matches, other details of the vehicle can also be checked.
3
4
Share

Will running a red light definitely be captured by cameras?

If there are cameras, the violation will be photographed as it constitutes a traffic offense. Whether a motor vehicle runs a red light while turning left or going straight, both are illegal acts. According to Article 10 of the Road Traffic Safety Law, driving a motor vehicle without obeying traffic signals results in a 6-point penalty. Vehicles must comply with traffic signals, including traffic lights, road signs, road markings, and directions from traffic police. If both left-turn and straight signals are green, proceeding straight from a left-turn lane violates lane regulations. When the left-turn signal is red, running it constitutes a punishable offense. The definition of running a left-turn red light: Violation is determined by the vehicle's position relative to the stop line when the light turns red. The primary evidence captured is the vehicle's movement during the red phase, particularly significant positional changes. If only the front wheels cross the stop line when the light turns red and the vehicle stops immediately, no penalty is imposed. However, if the vehicle continues moving completely past the line into the intersection during the red phase, this constitutes a punishable violation. Methods to avoid running red lights: Observe arrow signals before circular ones: With two types of traffic signals (arrow and circular indicators), prioritize checking arrow signals first when available to prevent violations. Note: Right turns are permitted during circular red lights unless a red right-turn arrow is displayed, in which case turning right would be penalized as running a red light. Timely braking: When the light turns red, ensure your vehicle doesn't cross the stop line. If front wheels accidentally cross, but rear wheels follow, cameras will capture this as a violation. If the front wheels just pass the line as the light turns red, wait for the next green cycle before proceeding. Monitor green light countdown: When the green light flashes, use displayed countdown timers for judgment. Without timers, vehicles close to the intersection traveling at higher speeds may proceed cautiously to avoid sudden braking, while distant or slower vehicles should stop immediately. Article 38 of China's Road Traffic Safety Law Implementation Regulations states: Green lights permit passage, but turning vehicles must not impede straight-moving vehicles or pedestrians. Yellow lights allow vehicles already past the stop line to continue. Red lights prohibit passage, except where no pedestrian/non-motor vehicle signals exist - these users should follow motor vehicle signals. Right turns during red lights are permitted if they don't obstruct other traffic or pedestrians. Exceptions when running red lights isn't penalized: Yielding to emergency vehicles: When yielding to ambulances, fire trucks etc., any camera-captured violations during manual review won't be recorded as red-light running. Even if recorded, appeals can be filed with traffic authorities. Extreme weather: When visibility is so low that even electronic monitoring can't clearly identify signal lights, potential violations with blurred evidence won't incur penalties for accidental red-light running.
16
0
Share

Which Wears Out Faster, Front or Rear Brake Pads?

Front brake pads wear out faster than rear ones. Here is some relevant information about brakes: 1. Introduction: As the name suggests, it is a mechanical braking device that slows down the speed of a vehicle, also known as a decelerator. 2. Structure: The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake pads on the brake drum, which then clamp the brake disc. 3. Function: To slow down or stop the vehicle. The manual brake of a car is located next to the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc caliper brakes to decelerate.
1
5
Share

Where is the turn signal control box of Mazda 6 located?

The turn signal control box of Mazda 6 is generally located under the left front instrument panel. Here is some relevant information about the instrument panel: 1. Introduction: The instrument panel is a rigid flat plate or structural component used to install instruments and related devices. According to the type, it can be divided into screen-type instrument panel, frame-type instrument panel, channel-type instrument panel, and cabinet-type instrument panel. The instrument panel can be equipped with external lighting and can also be connected to a control console. It comes in various forms and specifications, allowing for the installation of various instruments as needed, or combining different instrument panels into a whole as required. 2. Types of indicator lights on the instrument panel: Door status indicator, parking indicator, various instrument panel indicators, battery indicator, fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, turn signal indicator, high beam indicator, seat belt indicator, O/D gear indicator, internal circulation indicator, width indicator, VSC indicator, TCS indicator, etc.
3
4
Share

What Causes the Reversing Radar Failure in Audi A4L?

It may be due to a buzzer malfunction or a system failure. Below are the specific details of the Audi A4L: 1. Powertrain: The Audi A4L is equipped with a 2.0T four-cylinder turbocharged engine, delivering a maximum horsepower of 252 HP and a peak torque of 370 Nm. It has a curb weight of approximately 1.68 tons. The 0-100 km/h acceleration time is 6.6 seconds, paired with a 7-speed dual-clutch transmission. It features a front-engine, four-wheel-drive layout with five-link independent suspension on both the front and rear. 2. Features: The Audi A4L comes with tire pressure monitoring, ESP stability control, active braking, front and rear parking sensors, keyless start, keyless entry for all doors, a 12.3-inch full LCD dashboard with reversing camera, GPS navigation, Bluetooth connectivity, smartphone integration, and voice control functions.
12
0
Share

Is learning to drive an automatic transmission much easier?

Yes. Getting an automatic transmission driver's license is easier, with a higher pass rate compared to manual transmission. Beginners must place the gear selector lever in P (Park) or N (Neutral) position when starting an automatic transmission training vehicle, and firmly apply the handbrake or depress the brake pedal. When starting an automatic transmission car, first depress the brake pedal, shift to D (Drive), release the handbrake, then gently lift the brake pedal to allow the car to start moving slowly before gradually pressing the accelerator pedal and maintaining steady speed without sudden acceleration or deceleration. Additional notes: 1. Precautions: Avoid coasting in neutral, be careful when parking and shifting gears, pay attention when towing, beware of rolling back on slopes, be mindful of gear switching while driving, and pay attention to starting gears, etc. 2. Shifting into reverse before the car comes to a complete stop: The gears are still rotating before the car stops completely. Shifting into reverse prematurely can easily cause gear grinding. While it may not be noticeable once or twice, long-term practice will definitely damage the transmission.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.