What are the reasons for the insufficient cooling of the Wuling Zhiguang's air conditioning?

1 Answers
LeReid
07/29/25 5:28pm
Here are the specific reasons for the insufficient cooling of the Wuling Zhiguang's air conditioning: 1. Insufficient or low refrigerant: A common reason for the car air conditioning not cooling is insufficient or low refrigerant, which may be caused by minor leaks. 2. Loose drive belt of the car air conditioning compressor: Car cooling relies on refrigerant, and the transmission of refrigerant depends on the air conditioning compressor, while the drive belt is an important moving part that drives the compressor. If the drive belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced refrigerant delivery, resulting in the car air conditioning not cooling. 3. Unqualified refrigerant and refrigeration oil: Excessive impurities in the refrigerant and refrigeration oil can also cause clogging of the car air conditioning filter, leading to the air conditioning not cooling, increased resistance, and reduced refrigerant flow to the expansion valve, resulting in insufficient cooling capacity. 4. Moisture infiltration in the refrigeration system: If moisture infiltration in the car air conditioning refrigeration system causes insufficient or no cooling, then the desiccant or drying tank in the car air conditioning should be replaced.
Was this review help?
8
4
Share
More Forum Discussions

Can fog lights and hazard lights be turned on simultaneously?

Fog lights and hazard lights can be turned on at the same time. Usage of fog lights: Fog lights must be turned on during nighttime driving, and they are undoubtedly essential in foggy conditions and other weather with low visibility. According to traffic regulations, when visibility drops below 200 meters during rain or fog, vehicles should activate their fog lights. Usage of hazard lights: Hazard lights are used in situations involving vehicle issues, such as when a vehicle breaks down, during temporary parking, when towing another vehicle, or when forming a convoy permitted by traffic authorities. Their full name is hazard warning lights, and when activated, the vehicle's left and right turn signals will flash intermittently.
1
0
Share

What are the regulations for passenger cars towing trailers?

The "Implementation Regulations of the Road Traffic Safety Law" Article 56 stipulates the following provisions for motor vehicles towing trailers: Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, brakes, connections, safety protection devices, and other equipment of the trailer must comply with national standards; small passenger cars are only allowed to tow travel trailers or trailers with a total mass of less than 700 kilograms. Trailers must not carry people; the load capacity of the trailer towed by a truck must not exceed the load capacity of the truck itself. Large and medium-sized passenger cars, low-speed trucks, three-wheeled vehicles, and other motor vehicles are not allowed to tow trailers.
1
2
Share

What are the faults in the ignition system?

Faults in the ignition system: 1. Heavy muffler noise, high engine coolant temperature, and weak vehicle performance are mainly caused by delayed ignition. The solution is to adjust the ignition angle to the specified value. 2. Easy stalling and severe engine knocking sound during acceleration are due to inaccurate ignition timing adjustment or incorrect ignition angle assembly. The solution is to connect an ignition tester and adjust the ignition advance angle to the specified value. 3. Spark plug carbon deposits and oil contamination. Carbon deposits occur when the insulator tip, electrode, and spark plug shell are covered with a thick layer of black-gray powdery soft dirt. Oil contamination happens when the insulator tip, electrode, and spark plug shell are covered with engine oil. The solution is to regularly inspect and clean carbon deposits or oil contamination promptly.
4
2
Share

What is the reason for the Landwind X7 recall?

Landwind X7 recall reasons: engine abnormalities (unstable idling, fluid leakage), transmission abnormalities (abnormal noise, difficulty in shifting), corrosion, and front wheel abnormal noise. The Landwind X7 is a compact SUV under the Landwind brand, with body dimensions of 4420mm in length, 1910mm in width, and 1630mm in height, and a wheelbase of 2670mm. In terms of power, the Landwind X7 is equipped with a 1.5T turbocharged engine, paired with an 8-speed automatic manual transmission. This engine delivers a maximum power of 120kW and a maximum torque of 250Nm. For the suspension, the Landwind X7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
9
2
Share

What Documents Are Needed for Car Purchase?

Purchasing a car requires the owner's ID card, vehicle sales invoice, and signing a purchase contract with the dealer. Then, you need to pay the purchase tax, obtain insurance, and register the license plate—these are the procedures required for buying a car in full payment. When buying a car with installment payments, more documents are needed, primarily for loan processing. For purchasing a used car, you only need to prepare the documents required for ownership transfer and license plate registration. When buying a car, always ensure that all accompanying items are complete, such as the vehicle user manual, maintenance manual, tools, spare tire, etc., as these are crucial for the vehicle. When purchasing a used car, always check if the vehicle documents are complete and verify if the vehicle can be legally transferred. If a used car lacks complete documents and cannot be legally transferred, do not purchase it.
14
2
Share

How to Prevent Tire Blowouts?

Methods to prevent tire blowouts: 1. Regularly check tire wear. If the wear reaches the tire warning indicator, replace the tire as soon as possible; 2. Check tire pressure before driving to ensure it is within the normal range, as both overinflation and underinflation can easily cause blowouts; 3. Take cracks on the tire surface seriously. Consult professional auto maintenance shops for specific situations and take remedial measures or replace the tire; 4. Promptly remove debris such as stones, glass, nails embedded in the tire surface to prevent these objects from penetrating the tire and causing a blowout while driving; 5. Tires with surfaces corroded by chemicals, pitted, or bulging should not be used and need immediate replacement; 6. Replace tires that have exceeded their service life or show signs of aging. Additionally, tires that have been unused for a long time should not be used.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.