What are the reasons for the fuel supply system malfunction displayed in BMW 525?

1 Answers
DelLucille
07/29/25 11:30pm
BMW 525 shows fuel supply system malfunction for the following reasons: 1. On-board computer program error: This issue can be resolved by restarting the main unit, usually by pressing the volume knob for more than 15 seconds. 2. Fuel supply system wiring problem: The power harness of the electric fuel pump interferes with the pressure regulating valve on the fuel delivery unit. During vehicle use, this can lead to harness damage and, under specific conditions, may cause internal short circuits, requiring immediate factory inspection and repair. 3. Fuel line leakage: Leakage in the fuel line can result in excessively low oil pressure and insufficient fuel supply, necessitating immediate inspection and repair of the fuel line. 4. Fuel pump damage: In such cases, it is essential to visit a professional repair shop immediately for inspection and repair, with replacement of the fuel pump if necessary.
Was this review help?
3
5
Share
More Forum Discussions

What are the displacement requirements for motorcycle registration?

China's motorcycle management regulations stipulate: motorcycles with a displacement of 80-250ML can be registered. Those below 80ML are classified as power-assisted vehicles and do not require registration, but they need a motorcycle driving license when in use. Motorcycles exceeding 250cc cannot be registered. In theory, any domestically produced motorcycle with a certificate of conformity can be registered. According to regulations, any motor vehicle weighing over 40KG or with a maximum speed exceeding 20KM/h is considered a motor vehicle and must be registered before being allowed on the road. As per regulations, motorcycles with an engine displacement of 50CC or above (including 50CC) require a yellow license plate, and drivers must obtain an E or D license to operate them. 2021 Motorcycle Registration Regulations: Motorcycles can be inspected nationwide, and motorcycles registered within 6 years are exempt from inspection lines. Motorcycle inspections can be conducted nationwide. Motorcycles exempt from inspection within 6 years are also exempt from environmental inspections. For applicants applying for inspection in provinces (regions, municipalities) other than where the motorcycle is registered, no cross-region inspection authorization letter is required. For those who have already obtained an authorization letter but have not yet undergone inspection, the new regulations will apply, and no further authorization letter will be required. Motorcycles exempt from inspection within 6 years can apply for inspection marks across provinces (regions, municipalities). The exemption period for motorcycle inspections within 6 years is clearly defined. Registration Conditions: Motorcycles are classified as motor vehicles and must display a motor vehicle license plate and carry a motor vehicle driving license when on the road; Driving a motorcycle requires a valid motor vehicle driving license; Regular inspections are mandatory, and vehicles failing inspections are not allowed on the road; Two-wheeled motorcycles cannot tow or be towed by other vehicles; Noise and emissions must comply with national standards; Motorcycles exceeding 250CC cannot be registered or allowed on the road; Some cities prohibit motorcycles from operating within city limits, and even if all the above conditions are met, motorcycles cannot be used in these cities.
7
0
Share

Can a bicycle pump be used for a flat tire?

You can use a bicycle pump to inflate a flat car tire. Household cars generally use low-pressure tires with a tire pressure of 2.2-3.0 bar, while bicycle tires typically have a pressure of 3.5-4.5 bar, which is higher than car tires. Therefore, as long as the valve stem type matches, an ordinary bicycle pump can fully inflate a car tire. Here is additional information about pumps: A pump is an air inflator that draws air into a storage chamber through a pulling motion and then pushes it out to fill or top up the air required for various tires and some balls. The most common pumps today are made of stainless steel, primarily because stainless steel offers strong oxidation resistance, long service life, rust resistance, corrosion resistance, deformation resistance, lead-free safety, high hardness, wear resistance, and other advantages. They are durable and widely used for various balls, bicycles, motorcycles, etc. If a car tire is flat, a pump can be used for inflation.
4
1
Share

Which Cars Cannot Use Ethanol Gasoline?

Older vehicles and poorly maintained cars cannot use ethanol gasoline. Below is more relevant information: 1. Ethanol Gasoline: Ethanol gasoline has very high environmental requirements, is highly sensitive to water, and has a short shelf life. Therefore, the blending, storage, transportation, and sale of ethanol gasoline are much stricter than those of regular gasoline. Generally, small gas stations do not sell ethanol gasoline. Therefore, extra caution is needed when choosing ethanol gasoline, as improper use may cause significant issues for the vehicle. 2. Impact of Ethanol Gasoline on Vehicles: (1) Increased Fuel Consumption: Since ethanol has about 33% lower heat value than gasoline, ethanol gasoline has lower energy density compared to pure gasoline of the same volume. With the same fuel tank, ethanol gasoline results in higher fuel consumption. (2) Reduced Power Performance: Due to its lower heat value compared to pure gasoline and the fact that ethanol's evaporation temperature is higher than gasoline, ethanol gasoline vaporizes more slowly during combustion, affecting the formation of the air-fuel mixture and ultimately leading to decreased power output. (3) Cold Start Difficulties: Ethanol gasoline has a high latent heat of vaporization, absorbing more heat during vaporization. This process draws more heat from the surrounding environment, lowering the internal working temperature of the engine cylinders and making cold starts more challenging.
19
2
Share

What letter represents the China V emission standard?

The China V emission standard is represented by the Roman numeral Ⅴ. Below is an extended introduction to it: 1. Introduction to the China V concept: China V refers to the vehicle emission standard, officially known as the National Fifth Stage Motor Vehicle Pollutant Emission Standard, or China V standard. 2. Implementation of the China V standard: The China V standard is equivalent to the Euro 5 standard in the European Union, which has been in effect since 2009. It imposes stricter limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. From China I to China IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. As of January 2013, the China V standard was still in the public consultation phase. According to the latest national standard, the fifth stage national motor vehicle emission standard will be implemented nationwide starting from January 1, 2018, while Beijing will implement it ahead of schedule starting from January 1, 2016. After review by relevant departments, the China V standard was implemented nationwide starting from January 1, 2017.
19
0
Share

How are vehicles processed after applying for scrapping?

After applying for vehicle scrapping, the vehicle management office will issue the "Motor Vehicle Scrapping Certificate" and inform the owner to sell the scrapped vehicle to a scrapped vehicle recycling enterprise. Below is more information: 1. Definition of scrapped vehicles. A scrapped vehicle refers to a vehicle that has reached a certain service life or is severely damaged or in poor technical condition due to other reasons, cannot be repaired, consumes more than 50% of the fuel specified by national standards, and is compulsorily scrapped according to government regulations. 2. Management measures for scrapped vehicle recycling. Article 10 and Article 12 of the "Management Measures for Scrapped Vehicle Recycling" stipulate: The unit or individual owning the scrapped vehicle shall promptly apply to the public security organ for the motor vehicle scrapping procedure and sell the scrapped vehicle to a scrapped vehicle recycling enterprise. No unit or individual may sell, donate, or otherwise transfer the scrapped vehicle to a unit or individual that is not a scrapped vehicle recycling enterprise; nor may they dismantle the scrapped vehicle on their own.
8
3
Share

What are the penalties for getting caught with a cloned license plate vehicle?

According to the 'Road Traffic Safety Violation Points System' implemented in 2021 and Article 96 of the 'Road Traffic Safety Law', any vehicle with a cloned license plate will be penalized with 12 demerit points, a fine ranging from 2,000 to 5,000 yuan, administrative detention for up to 15 days, and the vehicle will be impounded in accordance with the law. Below are specific details about cloned license plate vehicles: 1. Concept: A cloned license plate vehicle refers to vehicles where criminals forge or illegally obtain the license plate number, model, and color of a legitimate vehicle, thereby disguising smuggled, assembled, scrapped, or stolen vehicles with a 'legal' appearance. 2. Types of cloned plates: Imported cloned plates and domestically produced cloned plates. 3. Hazards: They infringe upon the legitimate rights and interests of the actual vehicle owners, disrupt public security management by authorities, and create social instability factors.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.