What are the reasons for the flashing fault light of a 24V parking generator?

2 Answers
HaileyLee
09/07/25 3:33am
The reasons for the car generator warning light to illuminate are: Poor gasoline quality: Generally, this occurs when low-quality gasoline is added at an unregulated gas station, leading to incomplete combustion of the air-fuel mixture during engine operation, which triggers the engine fault light. This does not affect driving safety but may cause some degree of harm to the engine. Oxygen sensor failure: There are two oxygen sensors installed in the car, one before and one after the three-way catalytic converter. The front oxygen sensor detects the air-fuel ratio under different engine operating conditions, and the ECU adjusts the fuel injection amount and calculates the ignition timing based on this signal. Airflow sensor failure: The airflow sensor, also known as the air mass meter, detects the amount of air intake and converts it into an electrical signal sent to the ECU. Based on the optimal air-fuel ratio, it indirectly allows the ECU to determine how much fuel to inject.
Was this review help?
15
4
Share
OBradley
09/19/25 3:01am
I've been driving heavy-duty trucks for over twenty years, and the 24V parking generator warning light flashing is quite common during long-haul transportation, mostly due to voltage instability or overload. Once, while driving through mountainous areas at night, the light suddenly started flashing, giving me a scare. After stopping to check, I found that the generator pulley was loose, causing fluctuating speeds and unstable output. Another time, it was due to corroded battery terminals in winter, leading to poor conductivity. If the voltage is too high, it can burn out electrical components, while too low means the battery won't charge fully, eventually ruining the entire system over time. I believe drivers should immediately turn off additional loads like air conditioning or lighting when they see the light flashing, giving the generator a break. Safety is the top priority—don’t hesitate to pull over at a rest stop and use simple tools to check the voltmeter. If there’s no improvement, head to a professional repair shop as soon as possible. Ignoring this warning light can turn a minor issue into a major problem, compromising driving safety and costing extra time and money.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What is the minimum ground clearance of the 2017 facelifted Leiling?

The minimum ground clearance of the 2017 facelifted Leiling is 105 millimeters. The minimum ground clearance of the 2017 facelifted Leiling refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the 2017 facelifted Leiling improves off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The 2017 facelifted Leiling is a compact car produced by GAC Toyota, with a body style of a 4-door, 5-seater sedan. The dimensions of the 2017 facelifted Leiling are 4630 mm in length, 1775 mm in width, and 1480 mm in height, with a wheelbase of 2700 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2017 facelifted Leiling is not static; it also depends on the load condition. Therefore, changes in the vehicle's load should be considered when evaluating ground clearance. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is advisable to avoid underbody scrapes or damage, considering its off-road performance.
4
5
Share

How to turn off the seat belt alarm in a Corolla?

The method to turn off the seat belt alarm in a Corolla is: unplug the L22 and M10 connectors to cancel the seat belt alarm. When the connectors are unplugged, the seat belt alarm circuit will not conduct, and the alarm will no longer be triggered. The seat belt reminder system is designed to alert the driver and front passenger when they are not wearing their seat belts. The Corolla is a brand under Toyota, with dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. The vehicle features a GOA body structure, VSC (Vehicle Stability Control) system, curtain airbags, and side airbags, among others, providing comprehensive consideration for both active and passive safety, achieving outstanding safety performance.
19
2
Share

What are the reasons why the Honda key cannot be pulled out?

The reasons why the Honda key cannot be pulled out are: 1. It may be due to improper operation; 2. Poor lubrication of the keyhole. The solutions are: 1. Turn off the ignition switch, then press the key inward and pull it out; 2. Grind pencil lead into powder and pour it into the keyhole, as graphite can provide a lubricating effect. Honda is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange and the New York Stock Exchange. Its automotive business consists of the core brand Honda and the luxury brand Acura. The 'H' is the graphic trademark of Honda cars and motorcycles, representing the first capital letter of the Japanese pronunciation 'HONDA'. The letters 'HM' in the Honda motorcycle trademark are an abbreviation for 'HONDAMOTOR'.
5
4
Share

How to Solve the Sunroof Abnormal Noise in Toyota Corolla?

Toyota Corolla sunroof abnormal noise solutions are: 1. Check if there are any foreign objects in the sunroof sliding guide rails, and clean them if present; 2. Inspect the rubber seals around the sunroof for damage or aging, and replace them if necessary; 3. Check if any sunroof components are loose, and tighten them with tools if needed. The Corolla is a compact sedan under FAW Toyota, with dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. The vehicle is equipped with VSC (Vehicle Stability Control) system, TRC (Traction Control) system, HAC (Hill-start Assist Control) function, and an intelligent fuel-saving start-stop system.
18
3
Share

Where is the start button of an Audi car?

Audi's start button is located on the left side of the gear lever, featuring a circular start/stop button marked with 'start'. Another location is near the steering wheel, where you need to insert the key and press it to ignite and start the engine. Ignition methods are divided into traditional ignition and electronic ignition, with the latter relying on an electronic control device to start the car. Audi is a German luxury car brand, symbolized by four interlocking rings. It is currently a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany, and has branches in many countries including China. Audi's main models include A1, A3, A4, A5, A6, A7, A8, Q1, Q2, etc.
11
5
Share

How to Open the Hood of a Honda Accord?

To open the hood of a Honda Accord, follow these steps: Pull the hood release lever located near the driver's side door, then slide the hood latch lever at the center of the hood to release the locking mechanism, and lift the hood. Avoid using one hand or opening/closing the hood from one side only, as this may cause uneven gaps on both sides of the hood. The Accord is a mid-size sedan from Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. It is equipped with three engine options: a low-power 1.5L turbocharged engine, a high-power 1.5L turbocharged engine, and a 2.0L naturally aspirated engine.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.