What are the reasons for the entire vehicle system failure of the Wuling Hongguang Mini?

1 Answers
MacBrianna
07/29/25 6:30pm
If the Wuling Hongguang cannot start or ignite, it may be due to issues with the spark plugs or ignition coils, or problems with the fuel supply system and intake system. In such cases, a professional should use a diagnostic computer to read the fault codes. Below is relevant information about the vehicle's VCU: Function: The VCU collects signals from the accelerator pedal, gear position, brake pedal, etc., to determine the driver's intentions. By monitoring the vehicle's status information, the VCU processes the data and sends control commands to the powertrain and battery system regarding the vehicle's operating status. It also controls the working mode of the onboard auxiliary power system. Additionally, the VCU has functions for diagnosing, protecting, and storing fault information for the entire vehicle system. Design Principle: The VCU hardware adopts standardized core module circuits and VCU-specific circuit designs. The standardized core module circuits can be transplanted and applied to MCUs and BMS, making the platform hardware highly portable and scalable.
Was this review help?
18
4
Share
More Forum Discussions

What type of engine oil is suitable for the new Sylphy?

The new Sylphy uses 5W40 fully synthetic engine oil. Compared with mineral oil and semi-synthetic oil, fully synthetic oil has the following advantages: stable physicochemical properties, long-term prevention of sludge and carbon deposits, better lubrication, high-temperature oxidation resistance, extended oil change intervals, good low-temperature fluidity, easy cold starts, effective engine cooling at high temperatures, engine protection, and significantly improved vehicle performance. The dimensions of the new Sylphy are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. The new Sylphy is equipped with two engines: one is a 1.6L naturally aspirated engine with a maximum power of 93KW at 6000 rpm and a maximum torque of 154NM; the other is a 1.8L naturally aspirated engine with a maximum power of 102KW at 6000 rpm and a maximum torque of 174NM.
2
2
Share

What are the differences between Wuling Hongguang S and V?

The differences between Wuling Hongguang S and V are: 1. Different positioning: Wuling Hongguang S is a mid-size SUV; Wuling Hongguang V is a microvan. 2. Different dimensions: The exterior dimensions of Wuling Hongguang S are 4655mm in length, 1735mm in width, and 1790mm in height, with a wheelbase of 2800mm; the exterior dimensions of Wuling Hongguang V are 4425mm in length, 1670mm in width, and 1860mm in height, with a wheelbase of 2850mm. 3. Different powertrains: Wuling Hongguang S is equipped with 1.5L and 1.5T engines, paired with a 6-speed manual transmission; Wuling Hongguang V is equipped with a 1.5L engine, paired with a 5-speed manual transmission.
18
0
Share

What is the Audi S4 Black Optic Package?

Audi S4 Black Optic Package refers to the blackening of the front grille, window chrome trims, and rear bumper chrome strips. Exterior of the Audi S4: The Audi S4 features a more spacious rear seating area and a comfortable chassis, which is 13 mm higher than the European version of the S4 chassis, thereby achieving better comfort and off-road capability. Interior of the Audi S4: The interior of the Audi S4 continues the Audi family design, with exquisite craftsmanship and premium materials. A significant number of parts shared with the A6L can be found on the Audi S4's center console. The slightly driver-oriented black center console and the high-quality black interior give a cool feeling, as if sitting in a sports car. The interior leans more towards comfort, with the entire lineup featuring elegant light gray complemented by faux wood trim, presenting a very calm and sophisticated atmosphere.
4
4
Share

Does exceeding 2 months for the second maintenance count as voiding the warranty?

Exceeding 2 months for the second maintenance does not count as voiding the warranty. According to relevant national regulations: manufacturers and 4S stores are not allowed to refuse warranty services for vehicles on the grounds that maintenance was not performed at an officially authorized service center. This means that after the car manufacturer provides the first free maintenance for the car, the second maintenance can be performed at a location of the owner's choice. Items included in the second maintenance: The second maintenance mainly involves replacing the engine oil, oil filter, and air filter. Additionally, five inspections need to be performed: inspection of the cooling system hoses and joints, inspection of the engine fuel pipes and joints, inspection of the throttle, exhaust pipe, and brake system, inspection for transmission fluid leaks, and inspection and tightening of the chassis and underbody bolts and nuts. These inspections are a mandatory part of the second maintenance and are very important, so car owners must pay close attention to them.
13
4
Share

Where is the air pump fuse located in a BMW 740?

The air pump fuse in a BMW 740 is located under the right-side partition panel in the rear trunk. Location of the fuse box: The fuse box is situated under the right-side partition panel in the rear trunk. Characteristics of the fuse box: A fuse box refers to the housing (also known as a fuse holder) that accommodates fuses, facilitating their installation. Some fuse boxes feature properties such as waterproofing, fire resistance, and high-temperature tolerance (depending on material and design). Fuse boxes can be categorized into lead-type fuse boxes and automotive fuse boxes. Common injection molding materials for fuse boxes include plastic, nylon, bakelite, and PBT engineering plastics. Each material varies in its high-temperature resistance. When selecting a fuse box, considerations should include the current rating of the fuse to be used, the size requirements of the fuse, and the corresponding wire gauge. Higher current ratings necessitate larger gauge wires to prevent overheating of the fuse box and wiring, which could lead to a fire.
5
3
Share

Is There a Difference Between a Three-Way Catalytic Converter and a Particulate Filter?

There are certain differences between a three-way catalytic converter and a particulate filter, as detailed below: 1. Different functions: The three-way catalytic converter reduces carbon monoxide (CO) to carbon dioxide, nitrogen oxides (NOx) to nitrogen and oxygen, and hydrocarbons (HC) to carbon dioxide and water, thereby purifying vehicle exhaust. The particulate filter removes over 90% of mechanical impurities, colloids, asphaltenes, etc., from engine oil, ensuring maximum cleanliness of the oil and extending the engine's service life. 2. Different effects: If there are excessive and persistent particulate matter in emissions, stricter control of exhaust emissions is required, leading to the addition of a Diesel Particulate Filter (DPF) to the exhaust system. However, this device does not replace the three-way catalytic converter, as vehicle emissions also contain high levels of nitrogen oxides. Only through the effective decomposition of these oxides into nitrogen and oxygen by the three-way catalytic converter can the formation of acid rain be minimized.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.