What are the reasons for the engine indicator light to come on in the Envision?

2 Answers
DelDonovan
07/24/25 4:20am
The reasons for the engine indicator light to come on in the Envision are: 1. Insufficient engine oil: When the engine oil is insufficient, the cylinders and pistons are not properly lubricated, causing the engine fault light to illuminate. In this case, promptly replenish the engine oil. 2. Overheating engine: After prolonged intense driving, the engine temperature may rise excessively, leading to overload operation and triggering the engine fault light. In this scenario, wait for the temperature to decrease. 3. Engine misfire: An engine misfire prevents the engine from functioning properly. In such cases, it is necessary to conduct a detailed inspection and repair at a repair shop or 4S store. The Envision offers two powertrain options, equipped with 1.5T and 2.0T turbocharged engines respectively. The 1.5T engine delivers a maximum power of 124 kW and a maximum torque of 250 Nm, while the 2.0T engine provides a maximum power of 191 kW and a maximum torque of 400 Nm.
Was this review help?
7
4
Share
OWalter
08/10/25 11:57pm
As a car owner who has long been attentive to vehicle maintenance, my Envision once experienced an illuminated engine light due to an oxygen sensor malfunction. It affected fuel economy, costing me extra in gas; it could also be a misfire caused by ignition coil issues, making the car feel sluggish during acceleration. I've checked spark plugs and air filters, finding that dirt can also trigger warnings. I recall the light coming on during a long trip, and scanning the OBD code confirmed catalytic converter efficiency degradation. Timely repairs prevented major overhauls, and now I regularly perform emission checks. Loose electrical connections, like sensor plug dislodgement, are also common, especially in winter; low engine oil levels can cause the system to misdiagnose problems. I recommend not delaying and visiting a professional shop to check trouble codes with diagnostic tools, which can save on subsequent costs. Using quality fuel and maintaining service records are crucial.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What are the effects of adding too much fuel additive?

Adding too much fuel additive may increase carbon deposits in the combustion chamber, and in severe cases, it may cause engine knocking or detonation. Fuel additives are auxiliary fuel additives, and excessive use can lead to deterioration of vehicle exhaust emissions. When using fuel additives, it is important to pay attention to the dosage. The role of fuel additives is to solve the carbon deposit problem in the fuel system of fuel-injected vehicles, quickly restore engine performance, and compensate for some deficiencies in gasoline properties while imparting new beneficial characteristics. Precautions for using fuel additives: 1. Choose genuine products, as inferior fuel additives not only fail to eliminate carbon deposits but also have negative effects; 2. Pay attention to the frequency of use.
19
0
Share

How Long Can You Drive After the Car Indicates an Oil Change?

When the car indicates an oil change, you should stop driving as soon as possible and proceed with the oil change. This is because engine wear is significant, and the requirements for oil are high. Shortening the interval between oil changes effectively protects the engine. Engine oil, also known as motor lubricant, serves multiple functions for the engine, including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Engine oil consists of two main components: base oil and additives. The base oil is the primary component of the lubricant, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing certain new properties. Additives are an essential part of the lubricant.
6
2
Share

Should You Press the Clutch When Decelerating in a Manual Transmission Car?

When decelerating in a manual transmission car, you do not need to press the clutch. However, during braking while driving, each gear must maintain a speed above the minimum threshold; otherwise, you should press the clutch to prevent stalling. Generally, the car will not stall when: in third gear above 20 km/h, in fourth gear above 25 km/h, or in fifth gear above 35 km/h. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The clutch is only used in three situations: starting, shifting gears, and braking at low speeds.
5
5
Share

What are the reasons for the Buick car's reverse screen not being visible?

Reasons and solutions for the Buick car's reverse screen not being visible: 1. The camera is blocked by dirt. Clean the camera carefully to avoid scratching it; 2. The camera is faulty. Replace it with a new one immediately; 3. The screen is not visible due to loose or short-circuited wiring. Repair the wiring; 4. The display screen is damaged. Check if the display screen is powered. Buick models include Excelle, Regal, Verano, Envision, LaCrosse, Encore, Encore GX, Enclave, etc. Taking the LaCrosse as an example, its body dimensions are 5026mm in length, 1866mm in width, and 1459mm in height, with a wheelbase of 2905mm.
6
5
Share

Can AT Tires Be Used as Snow Tires?

AT tires cannot be used as snow tires. AT tires are all-terrain tires with rugged tread designs and slightly larger gaps between the tread blocks, making them suitable for both off-road and highway performance. However, all-terrain tires cannot replace snow tires for better traction, so they are not suitable for use as snow tires. Snow tires are specifically designed for snowy conditions, featuring rubber tires with metal studs to enhance grip. They are commonly used in colder regions prone to snow accumulation to improve traction and safety on icy or snowy roads. Snow tires are categorized into three types based on their anti-slip performance: zigzag tread tires, snow tires, and studded tires.
13
1
Share

Is the Odyssey from GAC Honda or Dongfeng Honda?

The Odyssey is a product of GAC Honda. Taking the 2021 Odyssey 2.0L Comfort Edition as an example, its body dimensions are 4847mm in length, 1820mm in width, and 1702mm in height, with a wheelbase of 2900mm. The body structure is a 5-door, 7-seat MPV. The Odyssey is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146ps, a maximum power of 107kw, and a maximum torque of 175nm. It is paired with an electronic continuously variable transmission, featuring front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.