What are the reasons for the Changan CS35 air conditioner not cooling?

1 Answers
DeIker
07/30/25 12:03am
Changan CS35 air conditioner not cooling reasons: cooling fan not working, refrigerant pressure too high or too low, refrigerant leakage. The following are related introductions: 1. Cooling fan not working: The cooling fan not working also has a great impact on the heat dissipation of the condenser and should be replaced in time. 2. Refrigerant pressure too high or too low: Refrigerant, also known as Freon, is the cooling medium inside the air conditioner. There will be some natural loss of refrigerant in the air conditioning system. If the refrigerant pressure is too low, the cooling effect will become worse, and if the refrigerant pressure is too high, the air conditioner will sometimes cool and sometimes not. Therefore, the refrigerant pressure must be adjusted to the standard range, neither too low nor too high. 3. Refrigerant leakage: More common leakage points include air conditioning pipelines, evaporator boxes and other parts, and related components need to be replaced.
Was this review help?
5
5
Share
More Forum Discussions

Buick Excelle Dash Cam Installation Tutorial?

Park the vehicle, open the right rear door, remove the door seal, open the dash cam packaging box, and take out the rear camera and connecting cable. Thread the rear camera connecting cable from the right rear of the trunk towards the front, then run it along the door seal all the way to the front dashboard area. Pry open the right side dashboard panel, route the dash cam power cable and rear camera cable along the inside of the right dashboard panel towards the dash cam. Insert the memory card into the dash cam, turn on the ignition, the dash cam will automatically start up, then adjust the positions of both front and rear cameras.
13
4
Share

What procedures are required for transferring a local vehicle to a local resident?

To process the transfer of a motor vehicle, the following materials are required: the identity proof of the current vehicle owner, proof and documentation of the transfer of vehicle ownership, the vehicle registration certificate, and the vehicle license. Below is an introduction to the content of a used vehicle transfer contract: 1. Information: Identity details of both parties. 2. Condition: Vehicle condition. 3. Amount: Transaction amount and payment method. 4. Issues: Agreement on transfer and related issues. 5. Liability: Liability for breach of contract. 6. Disputes: Jurisdiction for disputes. Both parties should sign and fingerprint the contract, and clearly state the date of signing.
10
1
Share

Where are the brake, clutch, and accelerator pedals located in a car?

The brake pedal is located between the clutch pedal and the accelerator pedal. The clutch pedal is on the far left, and the accelerator pedal is on the far right. Automatic transmission cars do not have a clutch pedal; in automatic cars, the brake pedal is on the left, and the accelerator pedal is on the right. Below is an introduction to the brake, clutch, and accelerator pedals: 1. Manual transmission cars have three pedals. From left to right, the first is the clutch, the second is the brake, and the third is the accelerator. The left foot controls the clutch, while the right foot controls the brake and accelerator. 2. Automatic transmission cars have only two pedals. From left to right, they are the brake pedal and the accelerator pedal. Only the right foot is used for control.
20
5
Share

How to Distinguish China 6 Emission Standard Vehicles?

Distinguishing China 6 emission standard vehicles can be done through the following methods: 1. Vehicle conformity certificate; 2. Environmental protection information accompanying vehicle list; 3. Vehicle frame number. The full name of the China 6 standard is the National Phase 6 Motor Vehicle Pollutant Emission Standard, which specifies the limits for harmful gases emitted from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. The key content of the China 6 standard includes: 1. Carbon monoxide emission limit of 700mg; 2. Non-methane hydrocarbon emission limit of 68mg; 3. Nitrogen oxide emission limit of 60mg; 4. Fine particulate matter emission limit of 4.5mg.
9
5
Share

What are the causes of car acceleration shaking?

The causes of car acceleration shaking are: 1. Dirty throttle body; 2. Excessive carbon deposits in fuel injectors; 3. Excessive carbon deposits in intake manifold; 4. Engine malfunction; 5. Insufficient cylinder pressure; 6. Half-shaft failure; 7. Fuel system malfunction; 8. Aging engine components; 9. Ignition system failure. The solutions for car acceleration shaking are: 1. Replace filters: including oil filter, fuel filter, and air filter. Replacing filters can improve filtration efficiency, reduce impurities, and make engine combustion more complete; 2. Clean carbon deposits: including spark plug carbon deposits, throttle body carbon deposits, and cylinder carbon deposits.
13
5
Share

What Causes the Engine to Sound Louder in Winter?

The reasons for the engine sounding louder in winter are: 1. The engine oil does not meet the standard or is overfilled, increasing the stirring resistance of the crankshaft connecting rod; 2. The oil viscosity is unsuitable; 3. Excessive engine carbon deposits, aggravating the wear of cylinders and pistons; 4. Mixing different brands of engine oil; 5. Not changing the engine oil on time. The solutions for the engine sounding louder in winter are: 1. Refer to the maintenance manual or driving environment and frequency to change the engine oil regularly; 2. Use the same brand of engine oil or oil with the same specification; 3. Clean the three-way catalytic converter and throttle carbon deposits; 4. Add the gasoline grade recommended in the vehicle manual.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.