What are the reasons for the air conditioning not cooling in BAIC New Energy vehicles?

2 Answers
LeRichard
09/07/25 8:21am
The reasons for the air conditioning not cooling in BAIC New Energy vehicles include the radiator needing cleaning, excessively high outdoor temperatures, and lack of maintenance. The specific details are as follows: Radiator needs cleaning: The air conditioning requires a heat exchanger to transfer heat between indoors and outdoors. When the heat exchanger is covered with a large amount of dust, cobwebs, and other debris, it cannot dissipate heat effectively, leading to poor cooling performance. Excessively high outdoor temperatures: When using the outdoor unit, pay attention to the surrounding environment. Keeping it away from high-temperature areas can improve air circulation and enhance the cooling efficiency of the air conditioning. If the unit is placed in an excessively hot environment, it may struggle to dissipate heat, resulting in poor cooling. Lack of cleaning and maintenance: Since the outdoor unit is installed outside, it is often overlooked. Over time, dust, dirt, and other debris can accumulate on it, reducing heat dissipation efficiency and causing the air conditioning to stop cooling.
Was this review help?
11
3
Share
GarrettDella
09/19/25 7:22am
Speaking of the issue with BAIC New Energy's air conditioning not cooling, as a seasoned electric vehicle mechanic with years of experience, I can tell you the most common cause is insufficient refrigerant or a leak. This is especially critical in new energy vehicles because the compressor is electrically driven—if the refrigerant is low, the entire system fails. Other issues include a faulty electric compressor, a stuck air conditioning controller, blown fuses, or relay malfunctions in the electrical system, all of which can prevent cold air from blowing. Additionally, excessively high battery temperatures in BAIC New Energy vehicles may trigger a protection mechanism, automatically shutting off the AC to conserve power. If this happens, don’t attempt DIY fixes—head straight to a professional shop to check refrigerant pressure and the electrical system to avoid compromising driving safety or damaging the battery. Oh, and regular checks of the cabin air filter and condenser cleanliness can help prevent such headaches.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

How many kilometers should a new car drive before changing the oil?

New cars should have their oil changed every six months or 5,000 kilometers. Additional information about engine oil is as follows: 1. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives can compensate for and improve the deficiencies in the base oil's performance, granting it certain new properties. Additives are an important component of lubricating oil. 2. Only qualified engine oil can reduce wear on engine parts and extend their service life. The engine is the heart of a car, containing many metal surfaces that move against each other in friction. These components operate at high speeds, in harsh environments, and can reach working temperatures of 400°C to 600°C.
1
5
Share

What engine is used in the BYD G3?

BYD G3 is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.8-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine is paired with either a 6-speed dual-clutch transmission or a 5-speed manual transmission, while the 1.8-liter naturally aspirated engine is matched with a CVT transmission. Following the F6, the BYD G3 is another high-end model, featuring self-developed technologies such as a keyless system, active door opening/closing, and one-button engine start. The BYD G3 is the first product of BYD's new high-end car network A3, with dimensions of 4.600 meters in length, 1.705 meters in width, and 1.490 meters in height, and a wheelbase of 2.61 meters.
7
3
Share

What Causes a Motorcycle to Fail to Start and Make a Rustling Sound?

The reasons why a motorcycle fails to start and makes a rustling sound are as follows: 1. Fuel system failure: Mainly caused by the fuel switch not delivering fuel, clogged fuel filter, carburetor not supplying fuel or having an overly rich mixture, and fuel pipe bending issues. 2. Electrical circuit failure: Short circuits in the entire electrical system (e.g., ignition switch, ignition coil, ignition module, and magneto failure) or open circuits caused by loose wiring harness connectors. 3. Air pressure failure: Insufficient cylinder compression, improper air intake resistance in the air filter element, and engine intake or exhaust faults. 4. If any of the above issues occur, it is recommended to take the motorcycle to a professional repair shop for inspection and repair.
5
3
Share

How to Replace the A6 Key Battery?

First, remove the mechanical key, then use a rigid pry tool to gently open the key casing along the seam, allowing access to replace the battery. Here are some relevant details: 1. The battery inside the remote key typically lasts 2 to 3 years. Once the battery is depleted, it should be replaced immediately to avoid inconveniencing the vehicle owner. 2. Some vehicles come equipped with a keyless start system. For these cars, the owner only needs to carry the remote key inside the vehicle, enabling the car to detect the key. At this point, pressing the start button while depressing the brake pedal will start the engine. 3. Vehicles with keyless start have a designated area inside the car specifically for key detection. If the remote key battery is dead, placing the key in this detection area allows the car to still recognize the key, enabling the owner to start the engine.
19
1
Share

Should You Pull Out a Nail from a Tire?

It is recommended not to pull out the nail by yourself. Instead, drive the car to a professional tire shop where trained staff can remove the nail and inspect the puncture. Additional information about tires is as follows: 1. The function of a tire is to support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Tires transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power performance, braking performance, and passability. 3. When replacing tires, use tires with the same size, speed rating, and load capacity as the original tires.
12
3
Share

What class of car is the Honda Gienia?

Honda Gienia is a compact-class car. This model is equipped with the Earth Dreams series engine, with the engine code L15B5, which is a 1.5-liter naturally aspirated engine. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The front suspension of the Honda Gienia uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The use of a torsion beam suspension in this car helps to expand trunk space and rear passenger space. The car's body dimensions are 4517mm in length, 1705mm in width, and 1477mm in height, with a wheelbase of 2600mm.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.