What Are the Reasons for Rough Gear Shifting in Manual Transmission?

1 Answers
Flores
07/30/25 1:24am
Manual transmission gear shifting issues can be attributed to operational factors, clutch factors, and transmission factors. Below are detailed explanations and solutions: 1. Operational Factors: Incorrect driver operation or mismatched speed and gear can cause gear shifting difficulties. Solution: Drivers should gain experience and improve their skills through practice to naturally resolve the issue. 2. Clutch Factors: The clutch may cause gear shifting problems due to the following three aspects: (1) Clutch malfunction, resulting in insufficient clutch separation travel, leading to incomplete clutch separation and inability to engage gears. Solution: In such cases, it is necessary to visit a repair shop to adjust the separation travel. (2) Excessive self-locking force of the clutch gear makes it difficult to shift in and out of gears. Solution: This situation requires adjusting the clutch cable and gear lock at a repair shop. (3) The transmission plate in the clutch pressure plate may deform for some reason, causing poor separation and resulting in difficult gear shifting. Solution: In this case, it is necessary to replace the pressure plate with a high-quality one that matches the original vehicle. 3. Transmission Factors: The transmission may cause gear shifting problems due to the following two aspects: (1) Old transmission oil needs replacement. If not replaced in time, its lubrication effect will decrease, leading to difficult gear shifting. Solution: Replace the transmission oil promptly. (2) New car transmission components have not reached the optimal running-in state, causing difficult gear shifting. Solution: After a period of running-in, the issue will naturally resolve.
Was this review help?
2
5
Share
More Forum Discussions

Where is the CRV battery located?

The CRV battery is located in the engine compartment. The functions of the battery are: 1. To provide a strong starting current to the starter when starting the engine. 2. To assist the generator in supplying power to electrical equipment. 3. To charge the battery when the generator terminal voltage is higher than the battery. Below is some relevant information about the CRV: 1. The latest two-wheel drive classic CRV has a MacPherson independent front suspension and a multi-link independent rear suspension. 2. It is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 193 PS, a maximum power of 142 kW, a maximum torque of 243 Nm, and is paired with a 6-speed manual transmission.
11
5
Share

What does McLaren antenna mean?

McLaren antenna refers to the antenna on McLaren cars. Functionally, the antenna can intercept high-frequency radio waves, but it is rarely used nowadays, mainly for the car's radio function. In daily life, you might occasionally see older drivers listening to radio programs. Below is an introduction to car antenna maintenance: Clean the antenna during car washing: Every time you wash your car, take the opportunity to wipe the antenna. Pull out the antenna core, remove dust and dirt, and then dry it. Check the connection between the antenna and the car body: For better radio reception, the antenna must be tightly connected to the car body. Sometimes even a little rust can cause poor radio reception. Therefore, regularly inspect the antenna base and clean it.
11
1
Share

What items are included in the first maintenance of the Honda Vezel?

Honda Vezel's first maintenance mainly includes changing the engine oil and oil filter, adding fuel injector cleaner, checking and topping up transmission fluid, brake fluid, power steering fluid, coolant, and windshield washer fluid; inspecting the battery charging condition, headlights and indicator lights operation, fluid system operation and leakage, as well as the working condition of steering and suspension components. Below is more information about Honda Vezel maintenance: 1. The first maintenance for Honda Vezel is performed at 3 months or 5,000 kilometers (whichever comes first) and is free of charge. It is important to note that the manufacturer requires new cars to undergo their first maintenance within the specified period mentioned above. 2. Regarding the oil filter, the maintenance manual specifies that it should be replaced every 10,000 kilometers.
11
5
Share

Where is the OBD port of Changan Star located?

The OBD interface of Changan Star is located next to the battery in the engine compartment of the car, and it can be seen by opening the engine hood. The full name of OBD is On-Board Diagnostics, which refers to the onboard automatic diagnostic system. This system can perform automatic diagnosis of the vehicle's status. Below is some relevant information about Changan Star: 1. The body dimensions of Changan Star are 3980mm in length, 1620mm in width, and 1890mm in height. 2. In terms of power, Changan Star is equipped with a 1.2-liter naturally aspirated engine across the entire lineup, delivering a maximum horsepower of 98hp, a maximum power of 72kw, and a maximum torque of 119nm.
3
2
Share

Where is the VIN stamping location on a Dodge Journey?

Dodge Journey's VIN is located on the nameplate of the plastic cover on the engine cover plate next to the battery under the hood. The dimensions of the new Journey crossover are 4910mm×1878mm×1751mm (L×W×H) with a wheelbase of 2890mm. Here's an introduction to the Dodge Journey: Exterior: Features the signature 'crosshair' grille with blackened treatment on both the grille and headlights, complemented by chrome accents on the bumper and side panels. Features: Standard equipment includes tire pressure monitoring, electronic stability control, power sunroof, keyless entry, and push-button start system with abundant configurations.
8
2
Share

What's the reason for the Geely Vision S1 display screen not lighting up?

Geely Vision S1 display screen not lighting up is most likely due to poor line contact, and it is necessary to check the wiring and the connection points of the whole vehicle installation in time. Aging of the video power cord: You can try replacing it with a new power cord. If the problem is solved, it means that the video power cord is indeed faulty. Excessive use of the car camera: Excessive use of the car camera leads to poor chip photosensitivity, which not only causes a lot of snowflake phenomena but may also result in a black screen. Such chip abnormalities and design defects are beyond the owner's ability to resolve and require inspection, repair, or direct replacement at a repair shop.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.