···
Log in / Register

What Are the Reasons for No Response When Turning the Car Key?

4 Answers
LeahAnn
07/28/25 4:40pm

The reasons for no response when turning the car key are: 1. The car battery is low on power; 2. There is an issue with the car's ignition system; 3. The car steering wheel is locked; 4. A fuse is blown, the high-voltage coil is open-circuit, or the low-voltage circuit is open-circuit; 5. The central ignition wire is detached, the distributor rotor is leaking electricity, or the spark plug is damaged. The functions of the car key are: 1. Closing the windows after turning off the engine, as the windows will automatically rise and close; 2. Making it easier to locate the car in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening the windows. Precautions for using the car key are: 1. Do not place it together with electronic devices; 2. Avoid exposing the key to high temperatures or direct sunlight; 3. Do not use batteries of different power levels.

Was this review help?
18
1
Share
DominicAnn
08/11/25 8:52pm

Last time I drove, I also encountered the issue where the key wouldn't start the car, which was really annoying. Possible causes include: first, battery problems—either a dead battery or corroded terminals preventing sufficient power to start the engine. Second, a faulty starting system, such as a broken starter motor or relay, where you might hear a clicking sound but the engine won't turn over. It could also be the key itself—if the key battery is low (especially for smart key cars), the signal might not reach the vehicle. Additionally, an activated anti-theft system might lock the ignition; try restarting the car or checking the dashboard for warning lights. Lastly, while less common, fuel system issues or faulty spark plugs shouldn't be ignored. If this happens, avoid forcing the ignition—first check the battery voltage with a tester, ask a friend for a jump-start, or call roadside assistance if needed.

Was this review help?
13
4
Share
Expand All
ZaneMarie
09/29/25 7:29am

As someone who frequently maintains my own vehicle, I believe that failure to start is often caused by an aging or depleted battery. For example, low temperatures in winter can easily drain the battery, so it's important to check if the electrode connections are oxidized or loose. Issues with the starting system, such as a faulty relay or ignition switch, are also common—try turning the key and listening for sounds to diagnose potential problems. Key-related issues are crucial as well: the battery in a smart key typically lasts about two years and needs replacement once depleted; a regular key may wear out or have a chip failure, so trying a spare key can help confirm the issue. Other causes include not being in Park (for automatic transmissions) or not pressing the brake firmly, as well as the anti-theft system mistakenly activating and locking the vehicle. For daily maintenance, keeping the battery clean and regularly checking its voltage can prevent most starting issues.

Was this review help?
11
1
Share
Expand All
JohnRose
11/13/25 2:36am

Don't panic when the engine fails to start, it might just be a minor issue. The most common cause is insufficient battery power—check if the dashboard lights are flickering. Additionally, the key itself could be the problem if its battery is dead or the signal is being interfered with; try using a spare key as a simple test. Faults in the starting system, such as a relay malfunction, can also prevent the engine from turning over. Safety first: ensure you're in a safe location and pull over to avoid repeatedly attempting to start the engine, which could damage components. If this happens, seeking professional help for a quick diagnosis is the most reliable solution.

Was this review help?
13
4
Share
Expand All
More Forum Discussions

Can Modified Wheel Size Pass the Annual Inspection?

Modifying wheels is a relatively conspicuous modification. If the wheel modification is not registered with the vehicle management office, it will not pass the annual inspection. Introduction to Wheels: Wheels are the rotating part of the tire's inner rim connected to the hub through spokes, which is the metal component mounted on the axle that supports the tire. Also known as rims, steel wheels, or simply wheels. Wheels come in various types based on diameter, width, forming method, and material. Types of Wheels: Depending on the characteristics and needs of different vehicle models, the surface treatment process of wheels also varies, mainly divided into painting and plating. For ordinary vehicle models, the appearance of wheels is less considered, with good heat dissipation being a basic requirement. The process mostly involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors that last long, even when the vehicle is scrapped. Many mass-market vehicle models use painted wheels. Some fashionable and dynamic colored wheels also employ painting technology.
18
0
Share

Is the Venucia D60 compliant with China VI emission standards?

Some models of the Venucia D60 comply with China VI emission standards, while others meet China V standards. The China VI-compliant models are sold in regions where the China VI standards have been implemented, and the China V-compliant models are available in areas where the China VI standards have not yet been enforced. Below is some relevant information about the Venucia D60: 1. The Venucia D60 is a compact sedan, equipped with a 1.6-liter naturally aspirated engine across all variants. The engine, coded HR16, delivers a maximum power of 93 kW, a maximum torque of 154 Nm, with peak power achieved at 5,600 rpm and peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Venucia D60 employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle is equipped with an electric power steering system, which provides a lighter steering feel.
6
1
Share

Where is the air conditioning filter element of the Haifuxing located?

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.
12
4
Share

What are the reasons for a car not starting with no power at all inside?

There are several reasons why a car may not start with no power at all inside: 1. Dead battery: This could be due to a drained battery from leaving headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. 2. Incorrect gear position: For automatic transmission cars, the gear must be in P or N position when starting. If it is in R or D position, the car will not start. Some manual transmission cars may also not start if the clutch is not depressed. 3. Lack of antifreeze: Using water or low-quality antifreeze in the car can cause the engine to freeze and crack in extremely cold winter conditions, leading to the water pump failing to operate, the car not starting, and damage to other engine components.
4
4
Share

How to Decelerate an Automatic Transmission Car?

To decelerate an automatic transmission car, release the accelerator pedal early and apply the brake. Below are detailed introductions to the gear positions of an automatic transmission vehicle: 1. The R gear is the reverse gear. When this gear is engaged, it connects the hydraulic system's reverse gear oil circuit, causing the drive wheels to rotate in reverse for backward movement. Never forcibly shift to the "R" gear when the vehicle hasn't come to a complete stop, as this may damage the transmission. 2. The N gear is the neutral gear. When neutral is engaged, the planetary gear system idles without power output. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control device automatically connects the corresponding forward gear oil circuit based on throttle opening signals and vehicle speed signals. It can automatically shift up or down according to driving speed changes, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the vehicle's tires, preventing the car from moving.
11
2
Share

What are the functions of the multi-function steering wheel buttons in Volkswagen?

The functions of the multi-function steering wheel buttons in Volkswagen are: 1. Resume button: Press RES to restore the previously set speed after temporarily canceling cruise control; 2. Set button: Press SET to set the current speed as the cruise speed after temporarily canceling cruise control; 3. Deceleration button: If adaptive cruise control is activated, use it to reduce speed; 4. Acceleration button: If adaptive cruise control is activated, use it to increase speed; 5. Cruise control on/off button: Press to turn on the cruise control function; 6. Cancel button: Press to cancel the cruise control function; 7. Volume adjustment buttons: Press to increase or decrease volume, with the left button decreasing volume and the right button increasing volume; 8. Bluetooth phone button: Press to answer incoming calls; 9. Voice control button: Press to activate voice commands; 10. Option toggle button: Used to switch between up and down options on the multi-function display; 11. Menu toggle button: Used to switch between left and right options on the multi-function display, press OK to confirm; 12. Track change button: Press to skip to the next or previous track.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.