What Are the Reasons for High Fuel Consumption in Wuling Vehicles?

2 Answers
VanBrianna
07/28/25 8:11pm
There are several reasons for high fuel consumption in Wuling vehicles: 1. Fuel consumption fluctuations due to temperature influence: Low temperatures increase the heat dissipation from the engine. The engine needs to maintain a constant temperature to operate properly, and more heat dissipation requires burning more gasoline to generate heat. 2. Long-term lack of vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in the engine's moving parts, which requires more energy to overcome, thereby increasing fuel consumption. 3. Spark plugs need replacement: If ignition occurs after the piston starts moving downward, it leads to partial power loss, with much energy not being used for work. This also causes incomplete combustion, further increasing fuel consumption. 4. Insufficient tire pressure: Insufficient tire pressure increases the contact area between the tires and the ground, raising friction and thus driving resistance, which increases fuel consumption. 5. Incorrect data from certain sensors: If the coolant temperature sensor indicates a lower temperature or the oxygen sensor shows excessive oxygen content, the computer may control to inject more fuel, ultimately leading to incomplete combustion and increased fuel consumption. 6. Excessive carbon buildup in the vehicle: Carbon deposits can accumulate in the throttle body, fuel injectors, intake manifold, and piston tops. Excessive carbon deposits in any of these areas can lead to incomplete combustion, thereby increasing fuel consumption.
Was this review help?
10
4
Share
Clinton
08/12/25 12:58am
Last month I just dealt with the fuel consumption issue of my relative's Wuling Hongguang. Found that novice drivers tend to stomp on the accelerator and brake abruptly - this driving style consumes about 15% more fuel than steady-speed driving. For older Wuling models with 5MT transmissions, frequently revving up to 3000 rpm before shifting makes the fuel tank seem like it's leaking. Also, many owners keep two cases of bottled water plus repair tools in the trunk long-term - carrying an extra 50kg burns half a tank more per month. Saw an extreme case last time where pebbles stuck in rear wheels reduced tire pressure to just 1.8, this hidden resistance caused a 20% fuel consumption spike. Recommend installing a mobile app to monitor real-time fuel consumption - driving problems become immediately apparent.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What to Do When the Car Key Won't Start the Engine?

Methods to start the car when the key won't ignite the engine: 1. Manual push-start method: Engage first gear and slowly release the clutch to utilize the wheel's rotational force; 2. Jumper cable assistance method: Connect the cables to both the non-starting vehicle and the rescue vehicle; 3. Towing start method: Use an appropriately sized tow rope to securely fasten the non-starting vehicle to the rescue vehicle. Reasons why the car key won't start the engine include: 1. Insufficient battery charge; 2. Battery voltage too low; 3. Battery malfunction; 4. Fuel supply system failure; 5. Ignition system failure; 6. Incorrect gear position; 7. Steering wheel lock engaged.
13
0
Share

What is the emission standard of the 2017 Vios?

2017 Vios is a vehicle that meets the China V emission standard. The 2017 Vios is equipped with two engines: one is a 1.3L naturally aspirated engine with a maximum power of 73kW and a maximum torque of 123Nm; the other is a 1.5L naturally aspirated engine with a maximum power of 79kW and a maximum torque of 123Nm. Both engines are paired with either a 5-speed manual transmission or a CVT transmission. The 2017 Vios has a body length, width, and height of 4420mm, 1700mm, and 1490mm respectively, with a wheelbase of 2550mm. The vehicle features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
13
0
Share

What is the 0-100 km/h acceleration time for Tesla Model 3?

Tesla Model 3's 0-100 km/h acceleration time ranges between 5.1 to 5.6 seconds. Relevant information about 0-100 km/h acceleration is as follows: 1. Definition: 0-100 km/h acceleration refers to the time taken to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100 km/h acceleration in 11 to 13 seconds, 2.0T midsize sedans in 7 to 8 seconds, while supercars mostly complete it in under 3.8 seconds. 2. Influencing factors: Different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of remaining fuel in the tank can affect test results, so there are no two identical acceleration test results.
5
1
Share

How much does the Haval H6 weigh?

The Haval H6 weighs 1675kg. Here are the relevant details about the Haval H6: 1. Body dimensions: The latest Haval H6 is a compact SUV with body dimensions of 4615mm in length, 1860mm in width, and 1720mm in height, a wheelbase of 2680mm, and a fuel tank capacity of 58 liters. 2. Body structure: The latest Haval H6 features a front McPherson independent suspension and a rear double-wishbone independent suspension, equipped with a 1.5L turbocharged engine that delivers a maximum horsepower of 150PS and a maximum power of 110kW, paired with a 6-speed manual transmission.
1
4
Share

Where is the license plate number Su O from?

Su O is the license plate number for administrative official vehicles of provincial-level Party and government organs, as well as public security, court, procuratorate, state security, and judicial systems in Jiangsu Province. The license plate numbers for various regions in Jiangsu Province are as follows: Su A is Nanjing, Su B is Wuxi, Su C is Xuzhou, Su D is Changzhou, Su E is Suzhou, Su F is Nantong, Su G is Lianyungang, Su H is Huaiyin, Su J is Yancheng, Su K is Yangzhou, Su L is Zhenjiang, Su M is Taizhou, Su N is Suqian. Jiangsu, abbreviated as Su, is a provincial-level administrative region of China, with its capital in Nanjing. The name is derived from the first characters of Jiangning Prefecture and Suzhou Prefecture. Jiangsu Province governs a total of 13 prefecture-level cities, 22 county-level cities, 19 counties, and 55 municipal districts.
16
5
Share

What Are the Main Failure Rates of the Roewe i5?

The main failure types of the Roewe i5 include engine issues at 7%, interior at 5%, body appearance at 5%, functional operations at 5%, and transmission system at 5%. Oil Pump Failure: Dirty or viscous oil prevents the oil pump from effectively drawing in and pumping out oil, resulting in low or no oil pressure. The solution is to change the oil. Overly Soft Pressure Relief Valve: A pressure relief valve or relief valve spring that is too soft, stuck, or has a damaged steel ball can cause the valve's function to disappear or weaken, leading to reduced oil pressure. The solution is to replace or repair it. Low Oil Pressure: Faulty oil pressure sensors, gauges, or circuits can result in low oil pressure. The solution is to replace or inspect them.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.