What are the reasons for Audi showing insufficient tire pressure in the right rear tire?

2 Answers
SilasAnn
09/04/25 5:09am
Audi cars displaying insufficient tire pressure in the right rear tire indicate a change in the standard tire pressure, mainly caused by tire leaks, tire damage, or wheel hub deformation. If no damage is found when checking for low tire pressure, you can directly inflate the tire to the normal pressure and reset the tire pressure system. If the tire is found to be punctured during inspection, it is necessary to drive to a tire shop promptly for repair and then reinflate the tire. If the tire pressure warning reappears after inflation without any visible punctures, it may be due to air leakage caused by wheel hub deformation. It is recommended to inspect the wheel hub and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Heavier steering wheel and increased tendency for the vehicle to drift, which are factors detrimental to driving safety; Increased movement of various parts of the tire, causing abnormal heat due to excessive rolling; Reduced functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction between the tire and the rim, resulting in damage and abnormal wear at the bead area; Exponentially increased friction between the tire and the ground, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving may lead to tire blowouts; Increased deformation of the tire body, making the tire side prone to cracks, along with flexing movements that cause excessive heat, accelerating rubber aging, fatigue in the cord layers, cord breakage, and increased tire contact area, which accelerates shoulder wear.
Was this review help?
14
2
Share
StKing
09/16/25 6:10am
Oh, my Audi also kept showing insufficient tire pressure in the right rear tire last year. After checking, it turned out the tire was punctured by a nail and leaking air. That time, I felt the wheel was floating while driving on the highway. It could also be due to aging or loose valve stems, especially in older cars where components wear out over time. Sometimes the system sensors give false alarms, like inaccurate tire pressure readings in cold temperatures when there's actually no leak. I recommend using a tire pressure gauge to check immediately. If the right rear tire is indeed low, add some air or get it patched. If the tire pressure is normal, it might be a TPMS module malfunction, and it's best to have the electronic control system checked at a 4S shop. Never ignore it, as tire issues can easily lead to blowouts and affect safety. Checking tire pressure monthly can prevent these problems—it's simple and hassle-free. Audi parts are reliable but a bit expensive; just get them fixed when needed.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to Adjust Valves on a Three-Cylinder Engine?

To adjust the valves on a three-cylinder engine, follow these steps: 1. Open the valve cover and prepare the necessary tools for turning the engine. The engine nameplate usually indicates the standard valve clearance. Locate the two corresponding valves for the engine. 2. Identify the position of the engine valves. To adjust the first cylinder, rotate it to the top dead center (TDC) position, where the valves are in a free state, allowing both intake and exhaust valves to be adjusted. 3. Use the engine turning tool to rotate the engine to the TDC of the first cylinder. When you observe clearance in both the intake and exhaust valves during rotation, you can adjust the valve clearance of the first cylinder. Loosen the lock nut of the first cylinder's intake valve, place the appropriate feeler gauge between the valve and the rocker arm, adjust to the specified clearance, and then tighten the lock nut. 5. Adjust the other two cylinders (second and third) using the same method. After adjusting all three cylinders three times, the process is complete.
7
0
Share

What is the Difference Between 48v and 60v?

The differences between 48v and 60v are price, configuration, power, speed, and load capacity. Price Difference: 48v electric vehicles are generally cheaper, while 60v electric vehicles are more expensive, but both can meet commuting needs. Configuration Difference: A 48v electric vehicle's battery pack typically consists of four 12v batteries connected in series, whereas a 60v model uses five. The accompanying motor, controller, tires, brakes, etc., also differ, with 60v models generally offering higher-end configurations. Power Difference: Generally, a 48v electric vehicle uses a 350W motor, while a 60v model often features higher-powered motors, such as 600W or 800W. Speed and Load Capacity Difference: 60v electric vehicles usually have higher speeds than 48v models, and their load capacities differ accordingly. For frequent uphill travel, 60v electric vehicles provide stronger kinetic performance.
6
3
Share

Does exposing a car to direct sunlight have any effects?

Exposing a car to direct sunlight does have effects. The consequences of leaving a car in a high-temperature environment under the sun are as follows: 1. Prolonged exposure to sunlight can cause the car's paint to fade. 2. Extended exposure to sunlight can accelerate the aging of plastic components such as tires, windshield wipers, and the dashboard. 3. Excessive heat from sun exposure can raise the interior temperature to dangerous levels, potentially causing heatstroke for anyone inside the car, which can be life-threatening. Methods for car maintenance: 1. When washing the car, it's important to clean the interior leather periodically to prevent bacterial growth on the leather seats. 2. Wipe the car with clean water once a week; there's no need to visit a car wash frequently. 3. Regularly place some activated charcoal inside the car, as vehicles emit a lot of exhaust during use, and some residue may inevitably remain inside the car.
20
3
Share

Can People with Red-Green Color Weakness Renew Their Driver's License?

People with red-green color weakness cannot renew their driver's license. Below are the specific materials required for renewing a motor vehicle driver's license: 1. "Motor Vehicle Driver's License Application Form": Must be signed by the applicant; the motor vehicle driver's license and the owner's relevant documents. 2. Proof of identity of the motor vehicle driver: If the applicant cannot be present, a jointly signed application form by the applicant and the agent, as well as proof of identity (original and copy) of both the applicant and the agent, must be submitted. 3. Proof of physical condition: A medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. For those applying to drive small automatic transmission passenger vehicles for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. 4. Three photos of the motor vehicle driver: The photos must be straight-edged, front-facing, color passport-style photos taken within six months before applying for the driver's license, with a white background and no uniform clothing.
11
0
Share

Can You Refuse to Take Delivery of a Car Older Than 3 Months?

If there was a prior agreement with the 4S store regarding the vehicle's production date, you can refuse. If not, the chances of successfully refusing are relatively low. Generally, the industry considers a car as "inventory" if it has been more than 3 months from production to sale. Here are the potential risks of inventory cars: 1. Lubricants, engine oil, and other fluids in the car may oxidize or absorb moisture, leading to suboptimal performance during operation. Non-compliant engine oil could even damage the engine. 2. Prolonged parking can cause consistent directional movement of mechanical parts inside the vehicle, potentially leading to deformation or misalignment over time, making driving hazardous. 3. If the car has been stored outdoors, constant exposure to sun and rain can cause rubber components to age and deform, resulting in issues like cracked wipers, leaking seals, and reduced sound insulation. 4. The car battery relies on engine operation to recharge. Long-term inactivity of an inventory car may leave the battery in a depleted state, significantly shortening its lifespan.
1
0
Share

How to Open the Engine Hood of the Buick Excelle?

The method to open the engine hood of the Buick Excelle is: 1. Locate the engine hood release lever below the left side of the steering wheel, pull it upward to release it, and then return it to its original position; 2. There is a safety latch in the middle front of the engine hood. Move the safety latch toward the driver's side of the vehicle and lift the engine hood. Do not drive with the engine hood open, as it can obstruct the driver's view and compromise driving safety. The Buick Excelle is a premium mid-size sedan under SAIC-GM Buick, with dimensions of 4587mm in length, 1798mm in width, and 1463mm in height, and a wheelbase of 2640mm. The vehicle is equipped with two powertrain options: a 1.3T dual-port fuel injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-port fuel injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.