What Are the Reasons for an Automatic Transmission Car Stalling While Driving?

1 Answers
McTaylor
07/30/25 2:11am
Automatic transmission cars may stall while driving due to the following reasons: 1. Triggering of the car's anti-theft system, causing the engine to lock; 2. Faulty ignition switch; 3. Damaged ignition module or damaged ignition reference signal line from the ignition module to the engine computer; 4. Low fuel pump pressure, fuel line leakage, insufficient power supply current, or damaged fuel pressure regulator; 5. Carbon deposits in the engine. Solutions for an automatic transmission car stalling while driving include: 1. Check if the car's anti-theft system has been triggered; 2. Inspect the operation of the ignition switch; 3. Examine whether the ignition module and signal lines are faulty; 4. Check for fuel line leaks; 5. Clean carbon deposits from the engine; 6. Verify if the battery has sufficient charge.
Was this review help?
11
3
Share
More Forum Discussions

How to Check Automatic Transmission Fluid?

Method to check automatic transmission fluid: Regularly inspect the automatic transmission fluid level to ensure it is normal. The method for checking transmission fluid differs from engine oil. The transmission fluid needs to be preheated to approximately 50 degrees Celsius. Then, shift the gear lever through all positions, pausing for 2 seconds in each, before placing it in the parking gear. At this point, the dipstick's normal fluid level should be between the maximum and minimum lines. If it is insufficient, promptly add the same quality fluid. To check the fluid level, first pull out the dipstick, wipe it clean with a cloth to remove any fluid traces, then reinsert it into the tube. Pull it out again to check. If the fluid level mark is between the upper and lower lines, the fluid level is just right. If it is below the lower line, transmission fluid needs to be added. If it is above the upper line, it indicates overfilling, and some fluid should be drained appropriately.
1
2
Share

What does the 'A' circle mean on a car?

An 'A' circle on a car stands for AUTOHOLD, indicating that the vehicle is equipped with an automatic parking function. For example, when encountering a red light at an intersection, if the car remains stationary for 1 to 2 seconds, the parking brake will automatically engage. The automatic parking system operates by utilizing the extended functionality of the electronic parking brake within the brake management system to control all four-wheel brakes. The implementation of this system is not simply achieved through the electronic parking brake alone. When parking on slopes or at traffic lights, drivers typically use the parking brake. Relying solely on the electronic parking brake in such scenarios would result in slower response times, as activating it requires both a prerequisite brake pedal action and button response time, along with a relatively long motor operation duration of approximately 0.5 seconds.
6
1
Share

What is the voltage of car chargers?

The input voltage of car chargers is 12V for cars and 24V for trucks. Here is the relevant information: 1. Function of car chargers: Car chargers are accessories designed to allow car owners to conveniently charge their digital devices anytime, anywhere using the car's power supply. Some high-end car chargers typically include 2 USB ports, enabling simultaneous charging for two digital devices. These products generally feature overload protection, short-circuit protection, high-voltage input protection, and high-temperature protection—four layers of safety protection to ensure secure usage. Car chargers can be used both in vehicles and at home, offering a multifunctional solution that combines car charging, direct charging, and USB charging. 2. Product features: Equipped with an automatic protection chip, these chargers can be used with confidence anywhere, providing perfect protection for devices during charging. The car charger plug is designed with a built-in fuse; in case of excessive voltage or current, the fuse automatically blows to protect the device. The car charger also includes a USB port, supporting power output for various USB-powered devices.
2
3
Share

What Are the Reasons for Difficult Gear Shifting in Manual Transmissions?

Manual transmission gear shifting difficulties include mismatched vehicle speed and gear position, lack of maintenance in the shifting mechanism, and insufficient lubrication in the transmission due to low winter temperatures. The specific reasons for difficult gear shifting in manual transmissions are as follows: Mismatched Vehicle Speed and Gear Position: The coordination between vehicle speed and gear position is crucial. Shifting into a low gear when the vehicle is moving too fast can make gear shifting difficult and accompanied by strong jerking sensations, and vice versa. Lack of Maintenance in the Shifting Mechanism: The shifting mechanism is a frequently used component, so its wear and tear can be significant. When the shifting mechanism lacks lubrication, operation becomes unusually stiff. Insufficient Lubrication in the Transmission Due to Low Temperatures: Since the transmission is lubricated by transmission oil, the oil's flowability is poor in low winter temperatures, resulting in inadequate lubrication. This issue can usually be resolved once the vehicle has fully warmed up.
10
4
Share

Why are all four tire pressures not displaying?

If all 4 tire pressures are not displaying, there may be an issue with the tire sensors, and they should be replaced promptly. Normally, it is unlikely for all four tires to have abnormal tire pressure simultaneously, which suggests a potential problem with the tire pressure system or the tire pressure sensors. Hazards of overinflated or underinflated tires: For tires, the pressure should neither be too high nor too low. Overinflated tires reduce the contact area with the ground, leading to poor traction, which can affect the vehicle's handling and driving stability. Underinflated tires may experience wave-like deformation during high-speed driving, compromising tire lifespan and increasing the risk of a blowout. Standard tire pressure specifications: According to the international GBT2978-2008 standard requirements, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.
18
0
Share

What does BSD mean in cars?

BSD in cars stands for Blind Spot Detection system. Below are the functions and uses of BSD in cars: Functions of BSD in cars: It uses high-tech detection to identify whether there are vehicles approaching from adjacent lanes behind or in the blind spots of the rearview mirrors. When a vehicle is approaching or present in the blind spot, the monitoring system alerts the driver through sound, lights, etc. The Blind Spot Detection system helps reduce the likelihood of collision accidents when changing lanes. Uses of BSD in cars: It is useful when changing lanes, reversing out of parking spaces, driving in rainy or foggy conditions with poor rearview mirror visibility, or when dazzled by high beams from behind at night. When changing lanes, it mainly helps avoid collisions due to vehicles in blind spots. When reversing out of parking spaces, visibility is often obstructed. In rainy, foggy, or nighttime driving, it compensates for the reduced effectiveness of rearview mirrors.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.