···
Log in / Register

What are the reasons and solutions for BYD car doors not opening?

1Answers
JadeFitz
08/31/2025, 01:48:45 AM

Below are the reasons and solutions for BYD car doors not opening: 1. Mechanical key cannot open the door: If even the mechanical key cannot open the car door, the first possibility is that the car's central locking system is in an electronic lock state. You need to wait for a few hours until the lock is released before attempting to unlock again. The second possibility is that the door lock cylinder is stuck due to long-term use and cannot be turned. If you want to solve it yourself, the only way is to use force, which means breaking the car window. Otherwise, you can only contact a 4S store for repair. 2. Car door cannot open in cold weather: In northern winters, the weather is extremely cold, especially on rainy days. The car door locks, handles, and door frames are likely to be frozen, making it impossible to open the door even with hard pulling, and it can easily damage the car paint and seals. The solution is to pour warm water on the frozen parts to speed up the melting of the ice. If you are not in a hurry, you can simply wait until noon when the temperature rises and then open the car door.

Was this review help?
113
Share
More Q&A

Where is the CVT transmission of SAIC MG produced?

The CVT transmission of SAIC MG is jointly developed by SAIC and General Motors. SAIC General Motors Co., Ltd., established on June 12, 1997, is a joint venture between SAIC Motor Corporation and General Motors Company. It has four major production bases in Pudong Jinqiao, Yantai Dongyue, Shenyang Beisheng, and Wuhan, with a total of four vehicle production plants and two powertrain plants, making it one of the key enterprises in China's automotive industry. The CVT transmission of SAIC MG does not have specific gears. In operation, it is similar to an automatic transmission, but the ratio changes continuously, unlike the step-by-step shifting process of an automatic transmission, ensuring smooth and continuous power delivery. For the daily use of SAIC MG's transmission, the following points should be noted: Do not delay changing the transmission oil for too long. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. While many experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create shocks when shifting back to D mode. Never shift into D/R mode before the vehicle comes to a complete stop. Many drivers shift into reverse while the vehicle is still moving to demonstrate smooth operation, but this can severely damage the transmission gears and lead to grinding or other failures over time. Avoid frequently climbing steep slopes in D mode. Automatic transmission vehicles may overheat under high loads or shift too early, resulting in insufficient power for climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while in N mode, rather than towing it directly with a rope or another vehicle.
108
Share

What to Do If There Is Abnormal Noise After Replacing Brake Pads?

Abnormal noise from brake pads can affect normal driving. The causes and solutions for abnormal noise after replacing new brake pads are as follows: 1. There is abnormal noise when braking, but no noise when not braking. This situation is caused by wear between the brake pads and the brake disc. After prolonged use, the old brake pads and brake disc have formed a certain complementary shape. When new brake pads are installed, the edges of the pads may not make even contact with the brake disc, leading to friction and abnormal noise. Solution: First, sand the edges of the brake pads to ensure they do not rub against the brake disc, which can eliminate the noise. If this does not work, the brake disc must be sanded and polished using a brake disc resurfacing machine to resolve the issue. 2. Issues with the brake pad material. If non-standard brake pads are used, the larger particles in the material can easily cause abnormal noise when braking. Solution: Replace with high-quality brake pads, such as ceramic brake pads.
109
Share

How to Remove the Door Panel of a Sylphy?

The method to remove the door panel of a Sylphy is as follows: 1. Remove the control panel with wiring harness; 2. Unscrew the screws securing the door trim panel; 3. Remove the small decorative panel on the inner door trim; 4. Pry from the edge between the door panel and inner door trim to separate them; 5. Remove the screws at the bottom of the door, use a screwdriver to pry open a gap, pull outward with your hand, then lift the door panel upward to remove it. Taking the 2021 Sylphy as an example, it belongs to the compact car category, with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and trunk capacity 510L.
107
Share

How to Identify Which Generation a Civic Belongs To?

Distinguishing between different generations of the Civic is based on the year of manufacture. Specific details are as follows: First Generation Civic: 1972 1979. Second Generation Civic: 1980 1983. Third Generation Civic: 1984 1987. Fourth Generation Civic: 1988 1992. Fifth Generation Civic: 1993 1994. Sixth Generation Civic: 1995 2000. Seventh Generation Civic: 2001 2004. Eighth Generation Civic: 2005 2011. Ninth Generation Civic: 2012~2015.
115
Share

Can the CFMoto Papio 125 Handle Long-Distance Travel?

125cc motorcycles can indeed handle long-distance travel. Ensure the bike is well-maintained before the trip, make necessary preparations, maintain a safe speed during the ride, and take regular breaks to rest. Motorcycle Displacement Categories: Motorcycle displacements are categorized as follows: ultra-lightweight (below 100cc, typically 50-90cc), lightweight/small displacement (100-150cc), medium-small displacement (200-400cc), large displacement (500-900cc), and super-large displacement (1000cc and above). Motorcycle Overview: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered via handlebars that control the front wheel. Known for being lightweight, agile, and fast, motorcycles are widely used for patrol duties, passenger and cargo transport, and as sports equipment. Broadly speaking, motorcycles can be classified into street bikes, sport bikes, off-road bikes, cruisers, and tourers.
104
Share

What to Bring for Subject 2 Driving Test?

For the Subject 2 driving test, you need to bring your ID card and exam admission ticket. The driving school instructor will provide the admission ticket to the candidate at the test site, which includes information such as the passing time of Subject 1, the score of Subject 1, and the scheduled date for Subject 2. If you fail the Subject 2 test on the first attempt, you are allowed one retake. If you do not attend the retake or fail it again, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 (road driving skills) must not exceed five times. If the fifth scheduled test is still failed, the passing scores of other previously passed subjects will be invalidated. Passing standards for Subject 2: The full score is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following requirements are met: For applicants of large buses, trailers, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; for other vehicle types, a score of 80 or above is required.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.