What are the pros and cons of fogging disinfection for cars?

2 Answers
DelAnderson
07/28/25 8:22pm
The pros and cons of fogging disinfection for cars are as follows: Advantages of fogging disinfection: It can purify the air inside the car, eliminate odors, and is safe, environmentally friendly, radiation-free, with strong penetration, fast conduction, and no dead corners. Disadvantages of fogging disinfection: Due to the complexity of the operation, the long disinfection time, and severe interior pollution, the effectiveness is not ideal. Additionally, the steam may adversely affect the car's electronic systems, the air purification process is slow, and sterilization is incomplete. Below are the effects of different fogging disinfection methods: Ozone disinfection: Only temporarily removes odors and does not substantially disinfect or sterilize. Steam disinfection: Can achieve some sterilization, disinfection, and odor removal. However, after steaming, electronic components in the car are prone to malfunction. Photocatalytic disinfection: Primarily targets new cars, focusing on removing odors from seats and genuine leather. It is ineffective without sunlight exposure after application. A+ fogging sterilization: Comprehensively removes harmful organisms and bacteria from all corners and gaps inside the car, improving the air quality of the interior.
Was this review help?
12
5
Share
EmilianoRose
08/12/25 1:10am
I recently had a fogging disinfection treatment for my car, and the pros and cons are quite noticeable. The benefits are that it thoroughly sterilizes and disinfects, covering every corner of the car, including the air vents and seat crevices, which is especially reassuring during the pandemic, preventing odors and bacterial transmission. After the treatment, the car smells much fresher, which is great for people with sensitive noses. However, there are also downsides: the cost is relatively high, costing several hundred yuan per session, making it not an everyday necessity. Chemical residues might irritate the skin or respiratory system—I felt a bit dry for a few days afterward and had to ventilate the car for a long time. Additionally, frequent fogging treatments could damage interior materials, such as making plastic parts brittle or causing leather seats to age. Overall, it's highly targeted but requires careful selection of reputable shops and professional products.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What procedures are required for car color change?

To apply for changing the color of a motor vehicle body, the following documents must be submitted according to Article 56 of the "Road Traffic Safety Law": Original "Motor Vehicle Change Registration Application Form". Original and photocopy of the identity documents of the motor vehicle owner and agent. Original motor vehicle registration certificate. Original motor vehicle license. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law", if the color change area of a motor vehicle does not exceed 30%, there is no need to go through the change registration process. Conversely, if it exceeds 30%, it must be filed and registered within 10 days after the vehicle color change. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to confirm whether the region allows the use of film wrapping to change the vehicle color. If the region does not support this method, the filing procedure cannot be completed after the color change, and the film must be completely removed to restore the vehicle's original color. Additionally, according to the "Motor Vehicle Registration Regulations", owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for change registration. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as commercial vehicles converted to non-commercial use or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or signal lights that are exclusive to or similar to those of the aforementioned vehicles. According to Article 56 of the "Motor Vehicle Registration Regulations", if the body color is changed without completing the change registration as required, the public security traffic management department may issue a warning or impose a fine. The vehicle may also be impounded and required to restore the original body color.
20
2
Share

Can You Drive on the Hong Kong-Zhuhai-Macao Bridge?

You can drive on the Hong Kong-Zhuhai-Macao Bridge, but you need to meet the following conditions: 1. Private vehicles crossing the bridge require toll payment and must have a Hong Kong or Macao license plate. 2. If you are a Hong Kong or Macao vehicle owner, you need a cross-border vehicle permit. Additional relevant information is as follows: 1. To drive the entire length of the bridge, you must have three types of license plates. These include the Guangdong Z license plate, as well as Macao and Hong Kong license plates. 2. The designers of the Hong Kong-Zhuhai-Macao Bridge adopted a "twist" design, allowing drivers to follow the right-hand-drive, left-hand-exit rule. When mainland vehicles enter the bridge, they still adhere to the mainland's right-hand traffic habit.
9
4
Share

What does the 'S' display mean in a Mercedes-Benz?

When the 'S' appears on the dashboard of a Mercedes-Benz, it indicates the following: 1. 'S' stands for Sport mode, typically a transmission sport gear setting. There is usually a mode switch near the gear lever that can be used to turn this mode on or off. 2. In 'S' mode, the upshift timing is delayed, resulting in a slight jolt during gear changes. This mode is suitable for drivers who prefer a sportier driving feel and enhanced vehicle acceleration performance, though it consumes more fuel. Below is additional information about Mercedes-Benz driving modes: 1. 'W' and 'C' modes: Represent Winter (snow) driving and Comfort driving modes. These modes use 2nd gear for starting, with early and smooth upshifts during driving, making them ideal for normal driving conditions and more fuel-efficient. 2. 'S' mode: Represents Sport mode, featuring delayed upshift timing with slight jolts during gear changes. It is designed for drivers who enjoy a sporty driving experience and improved acceleration, at the cost of higher fuel consumption. 3. 'C' mode: Stands for Manual mode, available in vehicles equipped with paddle shifters on the steering wheel. This mode allows drivers to manually control gear shifts, catering to those who seek extreme driving sensations. Fuel consumption varies significantly depending on driving demands in this mode.
16
2
Share

Where is Hawtai Motor produced?

Hawtai Motor has three production bases located in Rongcheng, Shandong; Ordos, Inner Mongolia; and Yanbian, Jilin. Established in 2000, Hawtai Motor Group operates these three production facilities primarily manufacturing SUVs, sedans, and buses. Additional Information: 1. Hawtai Motor Group is a diversified large-scale multinational corporation focused on new energy vehicle business, integrating R&D, design, manufacturing, sales of complete vehicles and powertrains, along with automotive finance. It is the only domestic automaker with complete independent intellectual property rights for automatic transmissions and world-leading clean gasoline/diesel engine core technologies. 2. As a mass-production autonomous brand automaker equipping its full vehicle lineup, Hawtai is also among the earliest Chinese automakers involved in the new energy vehicle industry. It possesses core technologies in integrated "three-electric technology" (electric control, motor, battery) and has gradually established independent IP rights, achieving major breakthroughs and significant advantages in lithium battery core technology research. 3. Hawtai's vehicle models include Santa Fe XEV260, Lushang S1, Santa Fe 7, Santa Fe 5, along with numerous new energy models. The brand offers multiple SUV models - SUV stands for Sport Utility Vehicle, reflecting their versatile usage as the name suggests.
10
0
Share

How to Replace the Battery in a Kodiaq Car Key?

Kodiaq car key battery replacement method is as follows: 1. Use a paper towel to wipe the surface of the Kodiaq car key dry. 2. Use a screwdriver to remove the remote control cover and detach the key blade. 3. Insert the screwdriver into the slot and turn it clockwise to completely separate the two parts of the remote control. 4. Gently split the key along the middle seam, then remove the old battery and replace it with a new one. Below is some extended information about the Kodiaq: 1. The Kodiaq is Koda's first domestically produced mid-size SUV based on the MQB platform. This mid-size SUV made its debut at the 2016 Guangzhou International Auto Show and immediately garnered widespread attention and praise. 2. Some configurations originally available only on high-end models have been extended to lower trims, including a full LCD digital instrument panel, dual USB charging ports in the rear, front parking sensors, automatic parking, driving assistance systems, and intelligent OFF-ROAD driving mode.
5
4
Share

What is the real fuel consumption of the Trumpchi GS4 Plus?

The comprehensive fuel consumption of the Trumpchi GS4 Plus is 7.1-7.7L/100km. There are currently 5 models of the Trumpchi GS4 Plus on sale: the Automatic Xingyao Edition, Automatic Xinghe Edition, and Automatic Xingchen Edition, with a comprehensive fuel consumption of 7.1L/100km. The Automatic Xingyun Edition and Automatic Xingji Edition have a comprehensive fuel consumption of 7.7L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 8.0-9.5L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to atomize during cold starts, requiring more gasoline to burn, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.