···
Log in / Register

How to Permanently Disable the Auto Start-Stop on CX-5?

1Answers
CaliLee
07/28/2025, 03:12:22 AM

To disable the auto start-stop function on the Mazda CX-5, simply press the designated button. For permanent deactivation, you need to visit a 4S shop for settings. Below are situations where turning off the auto start-stop is recommended: 1. When driving on a very steep slope: It is highly advisable not to activate the auto start-stop. Although the auto start-stop duration is brief, the engine's start-stop on a slope may lead to insufficient brake assistance. 2. During extremely hot weather in the south with the air conditioning running at full capacity: It is best to turn off the auto start-stop function. Since the air conditioning requires significant power consumption, the vehicle's electrical system may not provide enough power to keep the air conditioning running when the engine is off, causing discomfort to passengers. 3. When driving through water: It is recommended to disable the start-stop system to avoid the engine shutting off while driving. A sudden reduction in exhaust pressure could allow water to flow back into the engine through the exhaust pipe, potentially preventing the engine from restarting. 4. During heavy traffic congestion: It is advisable to turn off the auto start-stop. Prolonged engine shutdowns can cause the combustion chamber temperature to drop, leading to the formation of carbon deposits from unburned hydrocarbons and paraffin on the cylinder walls. These deposits can increase fuel consumption and reduce engine power, counteracting the fuel-saving purpose of the auto start-stop feature.

Was this review help?
114
Share
More Q&A

What is the difference between BMW 316i and 316li?

BMW 316i and 316li differ in the following aspects: Wheelbase length: The BMW 316li has a 110mm longer wheelbase than the 316i, with the overall vehicle length also extended by 110mm, providing slightly more space. Sunshade differences: The BMW 316li features rear sunshades and rear side sunshades, which the 316i lacks. Daytime running lights difference: The BMW 316li comes with daytime running lights, while the 316i does not. Rear cup holders and air vents difference: The BMW 316li is equipped with rear cup holders and rear air vents, unlike the 316i. Air conditioning difference: The BMW 316li has automatic air conditioning; there are no other differences.
103
Share

Is reversing after discovering wrong-way driving considered a traffic violation?

Reversing after discovering wrong-way driving is considered a traffic violation. Here are the relevant details: Wrong-way driving situations: Motor vehicle wrong-way driving refers to the following circumstances. On roads with solid dividing lines, motor vehicles entering the opposite lane. Among these, roads with double solid lines or single solid lines must not be crossed under any circumstances. On roads with dashed dividing lines, lane borrowing for overtaking is permitted when safety is ensured, but once an accident occurs, the lane-borrowing vehicle will be deemed to be driving the wrong way. Important notes: When driving a motor vehicle, always obey traffic rules and never drive the wrong way. Be responsible for yourself and others.
109
Share

What is the appropriate tire hardness?

This depends on the specific tire, as each tire has different hardness and wear resistance indices, and their lifespans vary accordingly. Below is relevant information about tire specifications: 1. Front tires: Measured by engine displacement, generally, vehicles with larger displacements have larger tire specifications. Of course, the size of the tire specifications directly affects the overall comfort, aesthetics, and off-road performance of the vehicle. The international standard tire code, expressed in millimeters, represents the section height and aspect ratio percentage. For small cars with displacements between 0.8-1.5, the applicable front tire specifications range from 155/65R1373T to 175/70R1477H. 2. Rear tires: As the name suggests, rear tire specifications refer to the size of the rear tires. Most cars have consistent front and rear tire specifications. However, in some high-performance special-purpose vehicles like sports cars and rear-wheel-drive models, the front and rear tire specifications may differ.
109
Share

What Causes the Impact Sound When Shifting to Reverse Gear in an Automatic Transmission?

The essence of this sound is the hard impact between the reverse gears, which occurs when shifting to reverse before the car has come to a complete stop. This causes intense wear on the gears, making them increasingly prone to gear grinding, slipping out of gear, and entering a vicious cycle, ultimately leading to major repairs. The reasons for the noise when shifting to reverse gear are as follows: 1. Reverse gear lacks a synchronizer: The synchronizer is an internal device in the transmission that ensures smooth gear engagement when shifting. If the clutch is depressed and the gear is immediately shifted, the reverse gears will collide due to speed differences, creating resistance and gear grinding noise. 2. Friction between gears during shifting: When the clutch is depressed, the reverse gears in the transmission may still be rotating for a short time. Shifting at this moment can cause gear grinding. The solution is to wait a few seconds after depressing the clutch until the rotating reverse gears have completely stopped before shifting, which will eliminate the abnormal noise. Therefore, when shifting to reverse, it is essential to ensure the car is fully stopped by pressing the brake before engaging the gear.
106
Share

How to Remove the Camshaft of Mitsubishi Pajero?

Here is the method for removing the camshaft of Mitsubishi Pajero: 1. Remove the camshaft timing gear and the half-moon key. 2. First remove the bearing caps of the 1st and 3rd positions, then remove the bearing caps of the 2nd and 5th positions. 3. Finally, remove the bearing cap of the 4th position. 4. Remove the camshaft bearing caps and arrange them in order. Below is additional information about symptoms related to camshaft damage: 1. Difficulty in ignition, the engine is hard to start. 2. Insufficient engine power. 3. Increased fuel consumption. 4. The car shakes. 5. The car suddenly stalls when hot.
103
Share

What are the symptoms of a faulty wheel speed sensor in a Mercedes?

There may be unstable engine idling; momentary stalling or engine shutdown when starting the vehicle or decelerating to a stop while driving. Here are some related solutions: External force breaking the wheel speed sensor wiring harness: In models manufactured before 2011, the wheel speed sensor wiring harness did not have extra length reserved, which often led to the harness being broken when the wheels were turned to full lock. This can be resolved by modifying the wheel speed sensor bracket to create extra length for the wiring harness, preventing future damage after replacement. False damage: Dirt on the sensor head or contamination by magnetic materials can cause the wheel speed sensor to fail. If the wheel speed sensor frequently malfunctions after driving through water, mud, or sandy roads, it is likely due to dirt and can be cleaned.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.