What are the procedures for changing the vehicle body color?

1 Answers
Clara
07/29/25 1:36pm
To change the vehicle body color, the owner or agent of the motor vehicle must submit the relevant documents to the local vehicle management office within ten days after the color change to complete the modification registration and have the vehicle inspected. The required procedures include: the identity proof of the vehicle owner, the original vehicle registration certificate, and the original vehicle license. It is important to note that the vehicle cannot be altered to resemble special-purpose vehicles such as ambulances, police cars, or engineering rescue vehicles. Below are the relevant details regarding modifying the vehicle color: 1. Only motor vehicles registered with the vehicle management office can change their body color. Vehicles seized or impounded by the People's Court, People's Procuratorate, or administrative law enforcement departments are not eligible for this service. 2. When applying for the color change, the applicant must bring the original and photocopy of the vehicle owner's identity proof, the vehicle registration certificate, and the vehicle license to the service desk to obtain the "Motor Vehicle Modification Registration Application Form". The form must be filled out carefully with a pen or fountain pen and must not be altered. If the application is handled by an agent, the agent's original identity proof and photocopy must also be submitted, and both the agent and the vehicle owner must sign the "Motor Vehicle Modification Registration Application Form" together. The form should clearly state the reason for the color change and the new color. 3. After completing the above procedures, if all requirements are met, the applicant can receive the "Approval Notice for Modification" and proceed to a 4S shop or auto repair shop for repainting. After the color change, the vehicle owner or agent must drive the repainted vehicle back to the vehicle management office with the required documents and the repainting invoice from the 4S shop or auto repair shop to complete the inspection procedures. The vehicle management office staff will then update the new body color in the system, take new photos, and complete the modification registration.
Was this review help?
6
0
Share
More Forum Discussions

Can You Cover a Car with a Car Cover in Summer?

You can cover a car with a car cover in summer, but you need to avoid direct sunlight and ensure the car is cool before covering it. Avoid direct sunlight: Make sure to park the car in a place where it is not exposed to direct sunlight. Otherwise, the cover may cause the car's temperature to rise abnormally, which could affect the paint and even the interior. Cover the car when it is cool: Try to ensure the engine is in a cool state. Do not cover the car immediately after driving when the engine is still hot. Since the car cover is relatively enclosed and not breathable or waterproof, it may cause engine damage due to difficulty in dissipating heat. Covering the car in summer not only provides some sun protection and dust prevention but also avoids harmful substances like bird droppings and insect residue from sticking to the paint, offering many benefits. However, some car owners feel that covering the car in summer is like trapping it, making the interior stuffier. If the cover feels non-breathable, you can choose a car cover with a support frame. This not only avoids friction between the fabric and the paint but also uses air for insulation, improving air circulation to some extent.
16
1
Share

Why does the Blue Whale engine have such high fuel consumption?

Blue Whale engine adopts the NE engine platform, with a thermal efficiency of up to 40%, resulting in relatively higher fuel consumption performance. Factors affecting fuel consumption: 1. Vehicle itself: (1) Engine displacement. Different vehicles inherently have different fuel consumption, with SUVs generally consuming more fuel than sedans. (2) Vehicle shape. This mainly concerns aerodynamic drag - greater drag leads to higher fuel consumption, largely influenced by the vehicle's exterior design. 2. External environment: (1) Road conditions. Stop-and-go traffic with frequent acceleration and braking increases fuel consumption. Generally, flat roads are more fuel-efficient than winding ones, and clear roads save fuel compared to congested ones. (2) Weather conditions. In summer, air conditioning consumes extra fuel, while in winter, low temperatures prevent gasoline from reaching optimal combustion temperature, leading to incomplete combustion and higher consumption. 3. Driver factors: (1) Vehicle load. Overloading or carrying heavy items in the trunk increases weight. (2) Improper driving habits. Aggressive braking, driving at high speeds in low gears, frequent braking, and hard acceleration all contribute to increased fuel consumption.
1
0
Share

What Are the Reasons for Higher Engine RPM in Winter?

Higher engine RPM in winter is caused by reasons such as not warming up the car before driving, severe carbon buildup clogging the engine, or faults in the engine's intake system or piping. Not warming up the car before driving: It is necessary to warm up the car before driving. Generally, warming up for about half a minute is sufficient, and prolonged warming up is not required. Then, gradually accelerate to avoid damaging the car's engine. Severe carbon buildup clogging the engine: This could be due to a dirty throttle body or excessive carbon deposits on the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In such cases, the carbon deposits should be cleaned promptly. Faults in the engine's intake system or piping: It is recommended to check the intake system or piping; inspect the throttle body (including sensors); check the coolant temperature sensor; examine the fuel injectors and ignition system; and inspect the accelerator pedal and its sensor.
2
5
Share

Does the steering wheel need calibration after removal and reinstallation?

Make marks, no positioning is needed. If no marks are made, a test drive is normal and calibration is not necessary. If it is not straight, it can be removed and readjusted without any impact. The following is an introduction to the steering wheel: 1. Reasons for the steering wheel not being straight: (1) A slightly off-center steering wheel is generally related to tire pressure, tire wear, wear of chassis components, and wheel alignment. You can first measure the tire pressure. When the tire pressure on both sides is inconsistent, the vehicle will drive towards the side with lower pressure. (2) Due to changes in vehicle alignment data, variations in wheel pressure, and loosening of suspension bushings during driving, the steering wheel may not remain in a straight position. 2. Two situations where the steering wheel is not straight: (1) One is when the steering wheel is not straight, but the vehicle can maintain straight-line driving. This phenomenon requires wheel alignment, adjusting the left and right front values with the steering wheel straightened. (2) The other is when the direction automatically drifts after releasing the steering wheel, causing the steering wheel to be off-center. This phenomenon also requires wheel alignment, along with checking tire pressure, suspension looseness, and body level issues.
14
2
Share

What Materials Are Needed for Driver's License Renewal?

Driver's license renewal requires the following materials: the driver's ID card, driver's license, three one-inch white-background photos of the applicant, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. Time for driver's license renewal: According to the regulations on the application and use of motor vehicle driver's licenses, the driver should apply for renewal at the vehicle management office where the license was issued or another office 90 days before the expiration date of the current license. Driver's license renewal process: You can bring your ID card and driver's license directly to the renewal authority, where you can take photos, undergo a physical examination, make copies, and renew the license on-site. If you don't mind the hassle, you can also go to a qualified hospital for the physical examination and a photo studio for photos, then bring all the required documents to the renewal authority to apply for renewal.
15
2
Share

Will points be deducted if the car body is not straight during the reverse parking in Subject 2?

Subject 2 reverse parking with an unaligned car body is considered a pass. As long as the car body does not cross the line during reverse parking, no points will be deducted. The straightness or tilt of the car body does not affect the test results. Below are the relevant details: 1. The Subject 2 test is part of the motor vehicle driver's license assessment. The original on-site test included selecting three items from nine: fixed-point parking and slope starting, parallel parking, curve driving, right-angle turning, speed and width-limited gates, continuous obstacles, 100-meter gear shifting, and bumpy road driving. The revised Subject 2 test now consists of five mandatory items: reverse parking, parallel parking, fixed-point parking and starting on a slope, right-angle turning, and curve driving. The test rules have been adjusted to be stricter. 2. The entire test is judged by the onboard computer and evaluated by the system. Not following the prescribed route or sequence results in a 100-point deduction. The car body crossing the line results in a 100-point deduction. Failing to complete the reverse parking results in a 100-point deduction. Stopping midway results in a 100-point deduction. The test evaluates the driver's ability to operate the car within the designated area. Reverse parking is a key assessment point in the driver's test, requiring the driver to correctly reverse the car into the garage from both sides while in motion.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.