What are the precautions for changing lanes?

2 Answers
ParkerFitz
07/23/25 8:14pm
Here are the precautions for changing lanes: 1. Changing lanes to the left: You can use 3rd gear or higher to change lanes. Generally, 3rd gear is suitable for speeds of 20-40 km/h, 4th gear for 40-60 km/h, and 5th gear for speeds above 60 km/h. Also, choose the appropriate gear based on the speed requirements of the left lane. For example, if the left lane requires a speed of 40-60 km/h, you can use 4th gear to change lanes. 2. Changing lanes to the right: When you need to change lanes to the right, you can first maintain your current gear and gradually merge into the right lane. After fully entering the lane, you can downshift by one gear.
Was this review help?
17
0
Share
MacErin
08/10/25 6:15pm
I've been driving for over a decade, and lane changing requires special attention. First, always turn on the turn signal a few seconds in advance to give drivers behind time to anticipate, avoiding sudden surprises. Then, check the rearview mirror for any vehicles, but never rely solely on it—turning your head to check blind spots is crucial. Motorcycles or bicycles can hide in those blind zones; I once nearly hit an electric scooter because I didn't look. For distance, maintain at least a two-second gap on highways before changing lanes. In city traffic jams, don't rush—avoid cutting in or jerking the steering wheel, as it can easily cause rear-end collisions. In bad weather like heavy rain, slow down and observe more due to slippery roads, making lane changes gentler. Develop good habits: avoid distractions like using your phone while driving.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Where to Adjust for Weak Climbing Power on a Motorcycle?

To address weak climbing power on a motorcycle, adjust the clutch, as insufficient power during uphill climbs is often caused by clutch slippage, preventing the engine's power from being properly transmitted. The clutch is located within the flywheel housing between the engine and the transmission, serving as a common component in mechanical transmission systems to engage or disengage the drivetrain as needed. Motorcycles, powered by gasoline engines and steered via handlebars for front-wheel direction, are lightweight, agile, and fast two or three-wheeled vehicles widely used for patrol, passenger and cargo transport, and as sports equipment. Broadly, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and tourers.
7
4
Share

What to Do If You Forget Your Glasses for Driver's License Physical Examination?

Generally, the physical examination for a driver's license is not very strict. You can directly inform the doctor that you did not bring your glasses and provide your prescription. Below are the items required for a C1 driver's license physical examination: 1. Surgical examination: height, weight. Examination of limb, trunk, and neck movement functions. Examination for physical defects. Examination for unequal leg length. 2. Internal medicine examination: checking for cardiovascular diseases, nervous system diseases, and mental disorders. 3. Ophthalmology examination: uncorrected visual acuity (uncorrected or corrected visual acuity must reach 4.9 or above on the logarithmic visual acuity chart), corrected visual acuity examination, and color vision (no red-green color blindness).
16
0
Share

Should the Volkswagen Sagitar use 92 or 95 gasoline?

Volkswagen Sagitar can use both 92 and 95 gasoline. 92 gasoline has an octane rating of 92 and consists of 8% n-heptane, which is suitable for cars with lower compression ratios. 95 gasoline is composed of 95% isooctane and 3% n-heptane. High-compression engines require gasoline with a high octane rating. Using low-octane gasoline in a high-compression engine can lead to abnormal combustion, causing knocking, increased fuel consumption, and reduced driving performance. The Volkswagen Sagitar features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power of 85 kW.
10
1
Share

What transmission does the Haval H6 use?

Haval H6 uses a 5-speed manual transmission. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output shaft and input shaft. The Haval H6 is a compact 5-door, 5-seat SUV with dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, and a wheelbase of 2738mm. This vehicle is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 Nm. It features front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
4
3
Share

Where is the engine spark plug located?

The engine spark plug is located inside the engine cylinder, which can be clearly seen after removing the high-voltage ignition coil. The spark plug, commonly known as the sparking plug, functions to discharge the pulsed high-voltage electricity delivered by the high-voltage wire (spark plug wire), breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the mixed gas in the cylinder. The engine is suitable for both power generation devices and can also refer to the entire machine including the power device (such as gasoline engines, aircraft engines). Its types include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), gas turbines (racing cars), electric motors, etc.
2
1
Share

What Causes Excessive Car Noise and How to Resolve It?

Reasons and solutions for excessive car noise: 1. Check whether the engine mounts are loose or damaged, and then determine whether the vehicle's engine oil needs to be replaced; 2. Check whether the engine's timing belt is excessively worn and whether it needs to be replaced. Do not ignore loud noises, as engine problems can affect driving. If excessive noise occurs during the use of a motor vehicle, the vehicle should be inspected to identify the source of the noise, followed by targeted inspection and repair. After repair, the vehicle can be used normally. If the owner is unable to perform the inspection, they can contact after-sales service or a repair shop for on-site service.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.