What are the precautions after car window tinting in winter?

1 Answers
LaSienna
07/28/25 5:01pm
Here are the precautions to take after car window tinting in winter: 1. After the full car tinting is completed, the owner should inspect the installation quality of the film. Check for any bubbles in the tint and view from different angles to ensure the film does not obstruct visibility. 2. After winter car window tinting, avoid rolling the side windows up and down. Due to lower temperatures in winter, refrain from operating the windows for 48-72 hours. Premature use of the one-touch window function may cause the film to shift before it fully adheres, affecting aesthetics. In severe cases, re-tinting might be necessary. 3. If bubbles are found within the car window film, have them addressed at a professional auto beauty shop within 24 hours. Delayed treatment increases the difficulty of correction. 4. Avoid washing the car for three days after tinting to prevent film detachment. If the car body is dirty, gently wipe it with a soft cloth, being careful not to trap sand or sharp particles that could scratch the film surface.
Was this review help?
3
0
Share
More Forum Discussions

What time does the driving test reservation update every day?

12123 usually starts updating the reservation slots around 12:00 noon. If the reservation slots have not been updated, you can refresh the APP or re-enter it, and you should be able to see the updated slots. To ensure a fair environment for all students to make reservations, the 12123 traffic management platform has established corresponding ranking and update principles. The rankings are refreshed daily at a specific time to ensure all students have the opportunity to book exams. Below are the update principles for the driving test reservation system: 1. Based on the last exam time: Rankings are sorted according to the time of the previous exam. For Subject 1, the ranking is based on the registration time; 2. Based on retake time: For Subject 1, if passed in one attempt, it generates a priority ranking for Subject 2. If failed, it generates a priority ranking for retaking Subject 1.
2
4
Share

Do driver's license photos need to show ears?

Driver's license photos need to show ears. The following are the requirements for motor vehicle driver's license photos: 1. Time: taken within 6 months before the applicant applies for the driver's license business; 2. No obstruction: the photo should be a straight-edged, front-facing, bareheaded, color, single-person half-length ID photo, without wearing a hat, scarf, uniform, or colored glasses; those with long hair should show both ears, and the head and face should not have any tilting, turning, heavy makeup, or accessories that may affect facial feature recognition. 3. Background color: white, with clear portrait, rich layers, natural expression, and no obvious distortion; 4. Photo size: 32mm×22mm, head width 14mm~16mm, head length 19mm~22mm.
4
2
Share

What are the annual inspection requirements for vehicles over 10 years old?

Here is an introduction to the annual inspection requirements for vehicles over 10 years old: 1. Additional inspection items: Private vehicles will have an added 'safety defect recall' check in the online inspection program. If the vehicle has safety issues and is subject to a manufacturer recall, the inspector will notify the owner of the recall status. 2. Clarified exterior inspection scope: The new regulations specify and relax the exterior inspection standards, allowing modifications such as grilles, pedals, roof racks, bumpers, and wheel rims during the inspection. 3. Exemption scope: The exemption range for motor vehicles has been expanded from non-commercial mini and small passenger vehicles with 6 seats or fewer within 6 years to those with 7-9 seats.
14
4
Share

How much does a 12R22.5 tire weigh?

12R22.5 multi-ply special tires can exceed 100KG. Definition of PR: PR stands for ply rating, which refers to the nominal number of cord layers in the tire rubber. It does not completely match the actual number of cord layers but serves as an important indicator of tire strength. The ply rating is marked in Chinese, such as 12-ply, or in English, such as "14P.R" meaning 14-ply. Common truck tires: Truck tires generally come in the following sizes: 12.00-20-18PR, 12.00R20-18PR, 10.00-20-18PR, 10.00R20-18PR.
9
0
Share

Can the 14-speed transmission be used without the half-gear?

14-speed transmission can be used without the half-gear as long as the clutch is properly engaged. The specific introduction of the 14-speed transmission is as follows: 1. 14-speed transmission: The 14-speed transmission has a front auxiliary high-low half-gear switch and a rear auxiliary high-low gear switch on the gearshift lever. Through the high-low gear switch in front of the gearshift lever, gears 1, 2, 3, and 4 can be switched in the low-gear range, and gears 5, 6, and 7 can be switched in the high-gear range. The other 7 gears require the half-gear switch on the left side of the gearshift lever. The half-gear switch divides each forward gear into high and low half-gears. Combining the high-low gear with the half-gear switch forms 14 gears in total. 2. Summary of 14-speed transmission operation: Switching gears within the same gear range only requires toggling the half-gear switch without moving the gearshift lever; the high-low gear switch is only used when switching between the 4/5 gear range.
19
2
Share

What is the size of a 16/70-20 tire?

In a 16/70-20 tire, the number 16 indicates that the section width is 16 inches, and 70 represents that the aspect ratio of the tire section is 70%. The following is a detailed introduction about tires: 1. Explanation of tire model: The model and specifications of a tire are generally marked on the sidewall of the tire, and the information displayed usually includes the tire size, aspect ratio, width, etc. 2. Tire characteristics: Tires usually need to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle. Tires are often used under complex and harsh conditions, and they endure various deformations, loads, forces, and high and low temperature effects during driving, so they must have high load-bearing performance, traction performance, and cushioning performance.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.