···
Log in / Register

What are the penalties for turning over a solid yellow line?

4 Answers
VonMia
07/29/25 7:32pm
Turning over a solid yellow line will result in a fine of 200 yuan and 3 demerit points. Below is detailed information on safe turning: 1. Use turn signals: Always use turn signals when turning; otherwise, other drivers may misjudge your actions, leading to unnecessary casualties. 2. Turn the steering wheel slowly: When turning, reduce your speed and avoid turning the steering wheel too sharply to prevent excessive centrifugal force that could cause the car to skid. If the car skids, immediately release the accelerator pedal. Turn the steering wheel toward the side of the skidding rear wheel, and once the car resumes straight movement, straighten the steering wheel to continue driving. 3. Avoid neutral gear when turning: Try not to enter a turn in neutral gear, especially for U-turns. In neutral, the engine cannot control the wheels' rotation, meaning the car is moving by inertia. All braking and steering operations become significantly less effective under these conditions, creating safety hazards.
Was this review help?
4
4
Share
Aniyah
08/14/25 2:32pm
Driving over the solid yellow line when turning requires extra caution—I've seen plenty of examples on the road. According to traffic rules, a solid yellow line is a strict boundary. Crossing it to change lanes or turn is considered a violation. In mainland China, this usually results in a fine of around 200 RMB and a 3-point deduction on your license. This isn’t a minor issue—why is the solid yellow line so important? It marks a no-crossing or lane-occupancy zone, preventing chaos that could lead to accidents. Once you cross it, if caught by a camera or traffic police, a ticket is inevitable. Accumulating points over time could even jeopardize your license. I advise all drivers to develop the habit of slowing down and checking road markings before turning—don’t risk convenience for momentary gain. Learning traffic safety knowledge is always worthwhile—after all, fines are minor compared to safety.
Was this review help?
2
3
Share
Expand All
JackMarie
10/15/25 5:49am
Last time I accidentally crossed the solid yellow line while turning, and ended up with bad luck! Got pulled over by traffic police, fined 200 yuan and deducted 3 points. It felt like paying to learn a lesson. That solid yellow line is like a wall in the middle - crossing it means breaking the rules. The penalty standards in our country are roughly like this: about 200 yuan fine plus 3 points deduction. It's actually quite risky - easily causing side collisions, endangering both others and yourself. I've learned from experience - signal early when turning, watch for road markings and go slowly. New drivers especially need to pay attention, don't follow my example of cutting corners, or the police won't go easy. Driving isn't child's play, keep safety rules in mind - it's not just about the fine but also the risks involved.
Was this review help?
10
1
Share
Expand All
AdalynnMarie
11/28/25 6:41am
Turning over a solid yellow line is absolutely illegal, and I emphasize safety whenever I see it. The solid yellow line indicates prohibition, and crossing it to change lanes can result in a fine of approximately 200 RMB and a 3-point deduction, which carries significant risk. More importantly, such behavior can lead to accidents, such as sudden turns causing side collisions. The penalties are based on traffic safety regulations, designed to protect everyone. I recommend every driver obey the markings, slow down when turning, and prioritize safety. The rules are not meaningless—violations can have serious consequences, ranging from fines and point deductions to injuries and vehicle damage. Developing good habits is crucial—watch the lines and signs, avoid crossing solid lines, and drive with peace of mind.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

How to Identify Cross-Region Vehicle Transfers by 4S Stores?

Methods to identify cross-region vehicle transfers by 4S stores: 1. Check if the vehicle's accompanying documents are complete, and verify whether the transferred vehicle is new. Sometimes, when 4S stores don't have vehicles in stock, the transferred ones might be from inventory; 2. Examine the manufacturing date on the vehicle's certificate of conformity and the engine nameplate. Generally, a vehicle should not exceed three months from the production date. If it hasn't exceeded three months, it can be confirmed as not being from inventory; 3. Check the odometer reading in the vehicle's onboard computer. Typically, the mileage should not exceed 10 or 20 kilometers; 4. Inspect the tire tread hairs. If there are many tire tread hairs, it indicates the vehicle has traveled a short distance, meaning less contact with the ground; 5. Examine the entire body's paint and appearance for any scratches or color discrepancies.
3
3
Share

What are the differences between the Golf Sportsvan and the Golf?

The differences between the Golf Sportsvan and the Golf are: 1. Different body dimensions: The Golf Sportsvan measures 4348mm in length, 1807mm in width, and 1574mm in height, with a wheelbase of 2680mm; the Golf measures 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. 2. Different rear designs: The Golf Sportsvan features a noticeable rear spoiler extension; the Golf has a relatively flat rear end. The Golf Sportsvan is positioned as a compact car that inherits the Golf's sporty genes and pure performance, while also being suitable for family use, business, and travel. It is a versatile urban hatchback specifically designed for modern Chinese urban families.
18
2
Share

What are the disadvantages of a turbocharged engine?

Turbocharged engines have the following advantages and disadvantages: 1. Advantages: Effectively utilizes the exhaust energy of the engine to provide boost for the intake system, resulting in good energy-saving effects. 2. Disadvantages: In the low-speed range, the exhaust energy is insufficient, and the boost effect is not obvious. The turbocharging intervention can only be felt after reaching a certain speed, leading to a delayed and inconsistent acceleration feeling. Below is additional information: The main function of turbocharging is to increase the engine's air intake, thereby improving the engine's power and torque, making the car more powerful. On another level, it also improves fuel economy and reduces exhaust emissions. When properly matched and operating under conditions where the turbo is generating positive pressure, it can reduce emissions and exhaust noise, significantly increasing power without a substantial increase in volume. The disadvantages are slow acceleration response and less linear and smooth operation.
20
0
Share

How to Avoid Crossing the Line in Subject 2?

When navigating an S-curve, there's a handy technique summarized as "left point aligns with right line, right point aligns with left line." Here, the left and right points refer to the top corners of the car's front. This means when turning in a particular direction, you should use the corresponding top corner to follow the opposite side's road edge line. Below is some information about Subject 2: 1. Definition: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination, specifically referring to the field driving skills test. 2. Objective: To master the basic essentials of driving operations and acquire fundamental vehicle control skills; to proficiently grasp the basic methods of field and road driving within the test area, enabling the reasonable use of vehicle controls and correct management of the vehicle's spatial position, as well as accurately controlling the vehicle's position, speed, and path.
10
1
Share

What to Do When the Car Battery Dies After Leaving the Lights on Overnight?

Here are the solutions when the car battery dies after leaving the lights on overnight: 1. Use another car's battery to jump-start your vehicle. Once started, the alternator will recharge the battery. 2. Replace the dead battery with a charged one and start the car. 3. For manual transmission vehicles, you can push-start the car by rolling it and engaging the gear. 4. Call a repair shop or towing service for assistance. Daily tips to protect your car battery: 1. Avoid parking the car outdoors for extended periods: If long-term parking is necessary, remove and store the battery to prevent freezing damage. 2. Cold weather makes engines harder to start: Limit each starting attempt to 5 seconds, with at least 15-second intervals between attempts.
8
1
Share

What is the recommended RPM during the break-in period for a new car?

The recommended RPM during the break-in period for a new car is between 2000 to 2300 revolutions per minute. The initial break-in period covers the first 500 kilometers of driving, followed by the mid-term break-in period from 500 to 1000 kilometers, during which the RPM should be kept below 2500 rpm. The final break-in period from 1000 to 1500 kilometers allows RPM between 2500 to 3500 rpm. Important precautions during the new car break-in period include: 1. Avoid sudden braking and rapid acceleration; 2. Always warm up the engine before driving; 3. Avoid overloading, as carrying full capacity may damage mechanical components; 4. Avoid long-distance trips, as prolonged engine operation increases component wear; 5. Use only reputable gas stations and ensure fuel octane meets (but doesn't necessarily exceed) manufacturer specifications, while maintaining fuel cleanliness.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.