What are the new vehicle inspection regulations within 10 years?

1 Answers
LaManuel
07/24/25 11:38pm
New regulations for vehicle inspections within ten years have adjusted the inspection cycle and exemption scope. The relevant details of the new vehicle inspection regulations are as follows: 1. Exemption scope: The exemption scope for motor vehicles has been expanded from the original non-operational small and micro passenger vehicles with 6 seats or fewer to those with 7-9 seats. In other words, after November 20th, non-operational small and micro passenger vehicles with 7-9 seats that are less than 6 years old will be eligible for the exemption policy. 2. Inspection cycle: Exempt vehicles can skip inspections for the first 6 years. From the 6th to the 10th year, inspections are required every 2 years, meaning motor vehicles aged 6-10 years will change from an annual inspection to a biennial inspection. Under the new regulations, exempt new vehicles will only need to undergo 2 inspections within 10 years, specifically in the 8th and 10th years.
Was this review help?
11
1
Share
More Forum Discussions

What is the correct way to use the one-button start in Volkswagen Passat?

Here are the steps for using the one-button start: 1. First, lightly press the start button once, wait for the ACC light to illuminate, then press the start button again. 2. When the start button turns green, indicating the vehicle's power is fully connected, and after the vehicle completes self-inspection, press the brake or clutch. 3. Press the start button once more to complete the vehicle's startup. Below is additional information about the one-button start: 1. In case of an emergency while driving, you can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. The power will then switch to ACC mode. 2. When the engine start/stop button is in the OFF state, the steering wheel locks to prevent theft. The steering wheel will also automatically lock when the door is opened or the smart key is removed from the smart key cylinder. 3. If the brake light fuse is blown, the engine usually cannot be started. In this case, you can hold the engine start/stop button for 10 seconds in the ACC state to start the engine.
6
2
Share

Does a Manual Transmission Need Transmission Fluid Replacement?

Manual transmissions do require transmission fluid replacement, typically every 3 years or after driving approximately 80,000 to 100,000 kilometers. There isn't a fixed interval for changing manual transmission fluid because manual transmissions have a simpler structure and more mature technology compared to automatic transmissions, resulting in lower requirements for the transmission fluid. Automatic transmissions, on the other hand, usually need fluid replacement every 2 years or around 40,000 to 60,000 kilometers, depending on the transmission's usage. If you experience issues such as rough shifting, jerking, poor acceleration, or unusual noises from the transmission, it may be due to insufficient or overly viscous transmission fluid, indicating the need for a fluid change.
8
3
Share

Does a manual transmission need gearbox oil replacement?

Manual transmissions do require gearbox oil replacement, but there isn't a fixed interval for changing manual transmission fluid. Since manual transmissions have simpler structures and more mature technology compared to automatic transmissions, they have lower requirements for transmission fluid. Automatic transmission fluid typically needs replacement every two years or approximately 40,000 to 60,000 kilometers, whereas manual transmission fluid can be replaced every three years or after driving about 80,000 to 100,000 kilometers. However, the specific timing depends on the actual usage condition of the transmission. Vehicle owners should perform regular maintenance on the transmission. After driving for a certain period, they should check for any oil leaks and inspect the condition of the transmission fluid. If the transmission fluid level is insufficient, it should be replenished promptly. If the fluid color darkens or the quality deteriorates, it should be replaced immediately.
16
1
Share

What is the correct parking method for a manual transmission car?

Correct parking method for manual transmission: 1. First press the brake to slow down the car, then press the clutch to cut off the power output, continue pressing the brake to stop the vehicle, shift to neutral, pull the handbrake, turn off the engine, exit the car, and lock the doors; 2. If the speed is relatively high, first press the brake, and when the speed drops to the minimum allowable value for the gear, simultaneously press the clutch to bring the car to a gradual stop, then shift to neutral; 3. When driving at 90 km/h in the highest gear and suddenly encountering a red light, only press the brake to reduce the speed to the minimum allowable value for the highest gear, such as 30 km/h, then press the clutch.
2
5
Share

Which gear should be used for manual transmission when going uphill?

When driving a manual transmission car uphill, it is generally appropriate to use 3rd gear. However, if the car is carrying heavy loads or passengers, it is recommended to use 2nd gear. The specific gear choice should be determined based on the vehicle's overall power performance, road conditions, slope gradient, and the driver's experience. Manual transmission, also known as a manual gearbox, requires the driver to manually shift the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. The working principle of a manual transmission is: by using the shift fork to change the gear engagement ratio, the driving torque is adjusted to suit different driving conditions.
15
1
Share

The Process of Full Car Painting?

The car painting process is divided into the following ten steps: 1. First, clean the car body with water. 2. Use a sanding block to flatten the sandpaper, then wet-sand the edges of the scratches. Sand until the edges are smooth and the transition from the paint surface to the primer is gradual. 3. Pour the body filler onto a spreader and apply it evenly over the scratched area. The filler should be slightly higher than the paint surface. After application, wait for the filler to dry completely. 4. Once the filler is dry, use sandpaper with water to sand the filler. Sand until the filler surface is level with the paint surface, smooth to the touch with no edges. Clean and dry the area before proceeding to the next step. 5. Before painting, mask off important components around the scratched area. 6. After masking, you can start painting. For plastic parts, it is recommended to apply a primer first to enhance the adhesion of the spray paint. 7. When applying the color paint, pay attention to the painting technique. Wait 3-5 minutes between each coat, repeating the process until the scratches and filler are completely covered and the color matches the surrounding paint. 8. Wait 20 minutes for the color paint to dry, then use a scratch repair agent to sand the color paint. Once sanding is complete, proceed to the next step. 9. Apply 2-3 coats of blending clear coat at the junction between the new paint and the original paint to ensure a more natural transition. 10. Finally, apply clear coat to make the paint surface look more glossy. Multiple layers of clear coat are needed, with a 30-second interval between each layer. Once done, the entire painting process is complete.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.