What are the new traffic regulations for vehicle annual inspection?

1 Answers
James
07/29/25 11:20pm
Vehicle annual inspection regulations are divided into two parts: exemption scope and inspection cycle. Below are the specific details of the vehicle annual inspection regulations: Exemption Scope: The exemption scope for motor vehicles has been expanded from the original 6 years and under for vehicles with 6 seats or fewer to include non-commercial small and mini passenger vehicles with 7-9 seats. This means that after November 20th, non-commercial small and mini passenger vehicles under 6 years old with 7-9 seats can enjoy the exemption policy. Inspection Cycle: Exempt vehicles can skip on-site inspections for the first 6 years, only requiring formalities every two years. From years 6-10, inspections are required annually. The new regulations indicate that the inspection cycle for private vehicles remains unchanged for the first 6 years, but for vehicles aged 6-10, the inspection frequency changes from annual to biennial. This means exempt vehicles will have biennial inspections within 10 years, with only the 6th and 8th years requiring on-site inspections.
Was this review help?
17
0
Share
More Forum Discussions

Does the Bora have models that meet the China 6 emission standards?

The Bora does have models that meet the China 6 emission standards. The 2020 Bora models comply with the China 6 emission standard. If you are purchasing a new car in a region where China 6 has already been implemented, you need to buy a model that meets the China 6 standard; otherwise, you won't be able to register it. In regions where China 6 has not yet been implemented, you can purchase models that meet the China 5 standard. The 2020 Bora models are equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine, coded as EA211DMB, has a maximum power output of 83 kW and a maximum torque of 145 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
5
4
Share

Where is the Santana Water Temperature Gauge?

Santana does not have a water temperature gauge but only a water temperature warning light. If the water temperature is too high, it will alert the owner through the water temperature warning light. The water temperature indicator light is used to show the temperature of the coolant inside the engine, displaying different statuses through colors: blue indicates low water temperature, red indicates high water temperature, and no light means normal. The car water temperature gauge indicates whether the engine's cooling system is functioning properly and consists of a pointer, scales, and the letters 'C' and 'H'. The function of the car water temperature gauge is to indicate the temperature of the coolant in the water jacket when the engine is running, with the scale unit in Celsius. When starting the engine, the water temperature gauge should indicate no less than 50 degrees Celsius, and during normal driving, the normal reading of the water temperature gauge should be between 70 and 90 degrees Celsius.
19
2
Share

What is the emission standard for the 2014 Verna?

The 2014 Verna is a China V compliant vehicle. The China V emission standard imposes stricter limits on pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter from motor vehicles. From China I to China VI emission standards, each upgrade reduces vehicle pollution by 30% to 50%. The 2014 Verna has a body size of 4300mm in length, 1705mm in width, and 1460mm in height, with a wheelbase of 2570mm. It features a fuel tank capacity of 43 liters and a trunk capacity of 475 liters. The car is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 95 PS, a maximum power of 70 kW, and a maximum torque of 132.4 Nm, paired with a 5-speed manual transmission.
1
1
Share

Can ETC be canceled after being processed?

ETC can be canceled after being processed. The ETC is affixed to the center of the car windshield, directly behind the rearview mirror. The installation position of the ETC should not obstruct the solar panel and should prevent blocking the driver's line of sight. The steps for reissuing an ETC are: 1. Bring the invalid ETC card to the bank card issuing location; 2. Apply for reactivation of the ETC card and fill out the application form; 3. After the application is approved, activate the ETC card. Once activated successfully, it can be used normally. The method to remove the ETC is: 1. Use a hairdryer to heat the contact surface between the ETC device and the glass to soften it before removal; 2. Soak a towel in hot water and heat the adhesive tape behind the device; 3. Use a scraper to remove the adhesive tape to take it off.
1
4
Share

What are the solutions when the car won't start in the morning?

The solutions when the car won't start in the morning are: 1. The car battery is low on power or the battery circuit is faulty, requiring circuit inspection or battery activation; 2. Low temperature causes reduced viscosity and rotation speed of the engine oil, you can try pressing the clutch before starting the engine; 3. Issues with the ignition system, requiring inspection of the vehicle's spark plugs and high-voltage wires; 4. Insufficient fuel in the car, always check the fuel level in the tank while driving, and refuel in time when the fuel level approaches the warning position; 5. Excessive carbon deposits inside the vehicle's engine, requiring timely cleaning. The steps to start the vehicle are: 1. Turn the key to the ON position and pause to wait; 2. After the dashboard icons flash and go out, turn to the START position to ignite.
15
3
Share

Is the 'a' button for internal or external air circulation?

The 'a' button is neither for internal nor external air circulation. This 'a' button activates the automatic mode, where sensors will automatically determine whether to use external or internal air circulation based on air quality. The car air conditioning system is a crucial component in vehicles, differing from home air conditioners in that it features both internal and external circulation modes. During high-speed driving when opening windows is inconvenient, you can activate the external circulation mode. When passing through areas with heavy dust or during traffic jams, the internal circulation mode can be used. If external circulation is enabled during traffic congestion, exhaust fumes may enter the cabin. It's essential to regularly replace the cabin air filter during routine vehicle use, as failure to do so may affect passenger health and reduce air conditioning efficiency.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.