What are the methods for determining reference points in car turning techniques?
4 Answers
When turning, try to avoid borrowing lanes for the turn. Instead, position the vehicle appropriately close to the left edge of the road, maintaining a distance of about 20cm. Below is an introduction to car turning techniques: Reference points for intersection turning techniques: When making a left turn at an intersection, try to choose a wide turn. Wide turns offer a larger field of vision, making it easier to observe surrounding road conditions. Position the vehicle at the starting point of a right-angle turn. Upon hearing the audio prompt, shift into first gear, release the handbrake, slowly lift the clutch while maintaining a semi-engaged state, and begin moving at a steady speed. Keep the vehicle moderately close to the left edge of the road, maintaining a distance of about 20 centimeters. Adjust this distance from the beginning and avoid making corrections when nearing the right-angle turn. Once the distance is set, focus your attention on the right-side door window glass. When the A-pillar aligns with the horizontal line of the inner corner of the right-angle turn, turn the steering wheel fully to the right. Precautions when turning: When turning, try to avoid borrowing lanes for the turn. For example, when turning left, first steer slightly to the right before turning the steering wheel to the left. Of course, if obstacles make this unavoidable, be sure to signal in advance and check if there are any vehicles closely following behind. High-speed turns have always been a leading cause of traffic accidents. Therefore, when turning at high-speed intersections, always stay close to the inner side of the turn, especially for large vehicles. When exiting the turn, drive close to the outer side.
When making turns in daily driving, I always make sure to identify the turning point accurately, which is crucial for both safety and smooth driving. Simply put, before entering a curve, I slow down in advance to a speed that's easy to control, avoiding sudden braking. At the same time, I focus my eyes on the inside of the turn or the exit, not the front of the car, so the car naturally follows my line of sight. For a regular right turn, I look at the inside corner or the end of the pedestrian path, while for a left turn, I observe the vehicles on the opposite side of the intersection. I also quickly check the rearview mirror and blind spots to watch out for pedestrians or other vehicles to avoid unexpected collisions. Over time, I've realized that if I only look straight ahead during a turn, it's easy to drift off course or react slowly. Additionally, steering should be smooth—no sudden turns—and leaning slightly forward helps stabilize my position. Remember, with more practice to develop good habits, coordinating speed and sightlines properly will significantly reduce accidents.
How to look at reference points when turning a car? For me, it's a visual guiding technique that works quite well. The key is to look where you're turning—shift your gaze right when turning right, focusing on the outer exit of the curve, and left when turning left, looking at the inner point. I always adjust my speed in advance, downshifting to the appropriate gear to ensure a smooth entry into the turn and avoid losing control at high speeds. Keep your vision broad—not just fixating on the target point but also scanning the rearview mirror and side windows to check for vehicles or obstacles in blind spots. On city streets, reference points include intersection markings and traffic lights. A common mistake beginners make is moving their heads without adjusting their body or staring too closely. I recommend practicing in simulated scenarios, like turning along painted lines in an empty lot. Combine this with proper body posture: hold the steering wheel lightly, lean slightly to maintain balance, and straighten up immediately after the turn. This not only ensures safe driving but also makes the turning process smooth and stress-free—it's actually quite fun!
When it comes to reference points for turning, I always prioritize safety. Before entering a curve, I reduce speed to stabilize the vehicle while focusing my gaze on the target point in the turning direction—for a right-angle turn, I look at the outer exit, and for a circular curve, I reference the inner point. Remember to check mirrors and blind spots for pedestrians or vehicles; in rain or snow, identify the reference point earlier to assess road slipperiness. The key is smooth steering wheel operation—avoid sudden turns—and matching speed to the reference point, as excessive or insufficient speed affects balance. Developing this habit significantly reduces accident rates, especially benefiting beginners or suburban roads. By staying mindful of following distance and environmental changes, handling various curves becomes effortless.
