Reverse parking requires controlling the driving speed throughout the operation, using first gear or reverse gear at idle speed, and maintaining consistent starting and driving speeds. After controlling the steering timing, observe carefully during the reversing process, grasp the key points of steering, and turn at the appropriate time. More extended information is as follows: 1. U-turn reversing: U-turn reversing should be performed in places where it is allowed (such as highways, intersections, street entrances, etc.), and should be carried out according to the specific conditions of the road width and vehicle traffic density. When performing a U-turn reverse on a wider highway, the position of the rear of the car or the wheels on the road can be directly judged from the rearview mirror. On narrow roads, if the position of the rear and rear wheels cannot be accurately judged from the rearview mirror, you can open the door and observe the rear wheels while operating. If multiple forward and reverse movements are required, get out of the car to see the safe distance between the road and the wheels to prevent falling into a ditch. In areas with high vehicle traffic density, someone should be assigned to direct. When performing a U-turn reverse at an intersection or street entrance, appropriately expand the view and range behind the vehicle, accurately judge the movements of passing vehicles, pedestrians, and bicycles in time, and reverse carefully to prevent accidents. 2. Garage reversing: Garage reversing is generally performed when the vehicle returns to the parking space or enters a temporary parking lot for parking. For such reversing, if the vehicle has good visibility (such as light buses, cars, large buses, etc.), the reversing can be directly observed and judged from the rear window of the vehicle. If the visibility is poor and the rear cannot be seen directly (such as fully loaded trucks, etc.), open the door to judge the position of the body in the parking space from one side of the door, while observing the other side of the body from the rearview mirror to prevent scratching the car or other vehicles. 3. Turning reversing: When performing turning reversing, the driver should pay attention to judging the situation on the inside of the turn and behind the vehicle, and observe both sides of the body from the rearview mirror, paying attention to the timing of turning the steering wheel to prevent rear-end collisions and body scratches. 4. Shifting reversing: Generally, this is performed when entering a narrow parking space or meeting on a narrow road section, requiring left and right movements to avoid obstacles, etc. This method sometimes requires multiple reversals, so be careful about the width of the vehicle's moving position, and judge the position of the rear of the vehicle, both sides of the body, and the rear wheels to prevent collisions, scratches, falling into ditches, and other traffic accidents. If necessary, someone should be assigned to direct behind the car.
