What Are the Main Classifications of Electric Vehicle Drive Motors?

What to Do If the Wuling Zhiguang's Heater Is Not Hot?

Solutions for Wuling Zhiguang's heater not being hot: 1. Check the cold/hot air control to see if the AC button is turned on and set to cold air. If so, turn it off. 2. Inspect the coolant level. If it is low, add more coolant. The car's heater generally relies on the engine's heat, which is delivered into the cabin through the cooling circulation system. The Wuling Zhiguang is a model under SAIC-GM-Wuling, with body dimensions of 3695mm in length, 1495mm in width, and 1860mm in height. The Wuling Zhiguang features a four-spoke steering wheel, popular in international passenger cars, offering better handling and a more enjoyable driving experience (standard model). Its frame is made of die-cast magnesium-aluminum alloy (commonly used in most passenger cars), which is lightweight and high-strength.

17

4

Share

How to Use the Car Heater?

To use the car heater, follow these steps: After starting the car, wait for the temperature indicator to reach the middle position. Then, turn on the heater after approximately 8 to 15 minutes, while setting the air conditioning to internal circulation. Be careful not to turn on the AC switch, as the heater utilizes the car's own heat cycle. The direction of the warm air is usually directed forward and toward the feet. The car heating system works by blowing cold air over the surface of the heat exchanger, absorbing its heat, and directing it into the car to raise the interior temperature. The heat source comes from the engine coolant, and the water-based heating system is commonly used in sedans, large trucks, and buses with lower heating requirements.

17

1

Share

Why Does the Idle Speed Increase When the Heater Is On?

An increased idle speed when the heater is on is often caused by excessive carbon buildup in components such as the throttle valve, idle control valve, intake manifold, intake valves, combustion chamber, and fuel injectors. When the heater is turned on, check for misfires in each cylinder. If there are slight misfires in all cylinders, issues with the throttle valve or spark plugs should be considered. If misfiring occurs in a single cylinder, the spark plug is likely the culprit. If no misfires are detected, the phenomenon may be normal. When the heater is activated, the blower starts operating, increasing electrical demand. This causes the alternator to output more current, thereby increasing the engine load. At this point, the slower engine speed can lead to incomplete combustion, resulting in a slight shaking sensation. This is similar to the shaking caused by the compressor starting up, though the shaking from the heater is usually milder than that from the compressor.

11

2

Share

How to Replace the Battery in a BMW X3 Blade Key?

The method to replace the battery in a BMW X3 blade key is as follows: 1. Press the button on the side of the key; 2. Pull out the key; 3. Use a screwdriver to pry open a clip and open it; 4. Pry open a corner of the back cover and slide the screwdriver downward along the edge; 5. Open the two small clips on the side, remove the back cover, and take out the battery. The BMW X3 is an SUV model under the BMW brand, with body dimensions of 4648mm in length, 1881mm in width, and 1661mm in height, and a wheelbase of 2810mm. The BMW X3's intelligent all-wheel-drive system can flexibly and quickly distribute driving force between the axles according to specific road conditions, ensuring strong traction whether on sharp turns, steep slopes, or slippery surfaces.

3

4

Share

What does the AC light on mean?

AC light on indicates that the vehicle's compressor is in operation and the air conditioning is activated. The AC button is the switch for the air conditioning compressor. In summer when using the air conditioning, it is essential to turn on the AC button. When the AC light is on, it means the cold air is being produced. The cold air is generated by the compressor pressurizing the refrigerant to liquefy and then vaporize, absorbing a large amount of heat from the air. Automotive air conditioning refers to the air conditioning device installed in the vehicle, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. The air conditioning system has become one of the indicators to measure whether a car is fully equipped.

7

5

Share

How to Turn on the Heater in a Geely Car?

The method to turn on the heater in a Geely car is as follows: After the car's water temperature gauge rises to the halfway point, rotate the right knob on the center console to the red zone, then press the upper semicircle AUTO button on the left side of the center console. The car will automatically blow warm air based on the conditions, and you can manually adjust the airflow by rotating the knob left or right. Geely Automobile is a privately-owned car manufacturing and operating enterprise, with a portfolio of internationally renowned brands including Geely Auto, Lynk & Co, Volvo Cars, Polestar, Proton, and MTG. Taking the Lynk & Co 01 as an example, its body dimensions are 4512mm in length, 1857mm in width, and 1689mm in height, with a wheelbase of 2734mm.

7

1

Share

What Are the Main Classifications of Electric Vehicle Drive Motors?

What to Do If the Wuling Zhiguang's Heater Is Not Hot?

How to Use the Car Heater?

Why Does the Idle Speed Increase When the Heater Is On?

How to Replace the Battery in a BMW X3 Blade Key?

What does the AC light on mean?

How to Turn on the Heater in a Geely Car?

What Type of Engine Oil Should Diesel Cars Use in Winter?

Is the Brake in the Middle or on the Right?

What does the L gear in a car mean?

What to Do When the Wuling Rongguang's Heater Isn't Hot?