What are the length, width, and height of the T-Roc?

2 Answers
SanJourney
07/24/25 4:53am
The length, width, and height of the T-Roc are 4318mm, 1819mm, and 1582mm respectively. Here is some additional information: 1. The T-Roc features a MacPherson strut front suspension and a multi-link rear suspension, with tire specifications of 215/55R17. It adopts a front-engine, front-wheel-drive layout. 2. The T-Roc has a very sporty appearance. It adopts the latest family design language, with a horizontal grille at the front that connects to the headlights on both sides. The chrome trim below connects to the bottom of the headlights, and the raised lines on the hood give it a powerful look. The lower grille features a large trapezoidal honeycomb pattern, with polygonal LED daytime running lights embedded on both sides for better recognition, and the bumper is accented with silver trim at the bottom.
Was this review help?
17
3
Share
DeAdelyn
08/11/25 12:33am
The T-Roc has dimensions of 4318 mm in length, 1819 mm in width, and 1582 mm in height. This size is particularly practical for experienced drivers like me, making city driving and parking a breeze—unlike those large SUVs that struggle with turns in narrow alleys. The moderate length also ensures flexible U-turns. The 1582 mm height provides a clear view when seated, reducing blind spots, and eliminates worries about water ingress during rainy conditions on flooded roads. With a width of 1819 mm and a wheelbase of 2688 mm, the rear seats offer ample space for two passengers without feeling cramped, with room for snacks and drinks, while the trunk easily accommodates a large suitcase and several bags. The overall design is compact yet spacious, with well-controlled fuel efficiency, making it ideal for daily commutes or short trips—a thoughtful and cost-effective design that truly impresses.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Will the Exam Fee Be Refunded If the Subject 2 Test Is Cancelled?

If you regret and want to cancel the test after successfully making an appointment, generally speaking, the fee will not be refunded. Below is an introduction to Subject 2: Concept: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination, referred to as the field driving skills test. It assesses the basic ability to control the vehicle; proficiency in the basic methods of driving on the field and internal roads, the ability to reasonably use vehicle controls, correctly manage the vehicle's spatial position, and accurately control the vehicle's position, speed, and route. Projects: The test includes five mandatory items—reverse parking, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve)—with some regions adding a sixth item, high-speed card collection.
4
2
Share

How to Check if a Car Meets China 5 or China 6 Emission Standards?

How to Check if a Car Meets China 5 or China 6 Emission Standards? The methods are: 1. Check the vehicle's factory certificate; 2. Check the vehicle's environmental protection standard list; 3. Check the vehicle's conformity certificate. The differences between China 5 and China 6 are: 1. Different carbon monoxide emissions: China 5 emission is 1000mg; China 6 emission is 700mg. 2. Different full names: China 5 is officially called the National Fifth Stage Motor Vehicle Pollutant Emission Standard; China 6 is officially called the National Sixth Stage Motor Vehicle Pollutant Emission Standard. Both China 5 and China 6 regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and soot emitted from vehicle exhaust.
19
5
Share

Does a New Car Battery Need Charging?

Yes, a new car battery needs charging. New batteries come from the factory with some charge, but not fully charged. Some batteries develop high internal resistance after prolonged use, reaching full charge quickly but discharging rapidly as well. These batteries may show normal no-load voltage when tested with a multimeter, so it's important to not only measure the no-load voltage but also the discharge current, which can be tested using a discharge tester. Car batteries, also known as storage batteries, are a type of battery that works by converting chemical energy into electrical energy. They are categorized into conventional lead-acid batteries, dry-charged batteries, and maintenance-free batteries. Typically, when people refer to car batteries, they mean lead-acid batteries. The normal service life of a car battery ranges from 1 to 8 years, depending largely on the vehicle's condition.
11
0
Share

What is the composition of the engine lubrication system?

The composition of the engine lubrication system is: 1. Oil supply device: includes oil pump, oil passage, oil pipe, and pressure relief valve; 2. Filtration device: includes oil strainer, coarse filter, fine filter, and bypass valve; 3. Instrument and signal device: includes clogging indicator, pressure sensor, oil pressure alarm, indicator light, and pressure gauge. The lubrication methods of the engine lubrication system are: 1. Pressure lubrication: a lubrication method that supplies oil to the friction surfaces at a certain pressure; 2. Splash lubrication: a lubrication method that uses oil droplets or mist splashed by moving parts during engine operation to lubricate the friction surfaces; 3. Grease lubrication: a method of lubricating the working surfaces of parts by periodically injecting grease through grease fittings.
6
2
Share

What is the working principle of the reverse gear in a transmission?

The working principle of the reverse gear in a transmission varies depending on the type: 1. For manual transmissions, the reverse gear works by shifting the gear lever to switch the driving gear on the intermediate shaft, engaging different gear combinations with the power output shaft to alter the torque and speed of the driving wheels. 2. For automatic transmissions, the reverse gear operates using a planetary gear mechanism to change speed automatically based on the degree of throttle pedal pressure and vehicle speed changes, requiring the driver to only control the speed via the accelerator pedal. The functions of a transmission include: 1. Changing the transmission ratio to expand the range of torque and speed variations for the driving wheels. 2. Enabling reverse driving without altering the rotation direction of the engine crankshaft. 3. Interrupting power transmission to the driving wheels during engine start, idle operation, gear shifting, or when stopping to output power. 4. Allowing neutral gear, where the transmission does not output power when the clutch is engaged.
20
4
Share

Which country produces Ferodo brake pads?

Ferodo brake pads are produced in the United Kingdom. Brake pads refer to the friction materials fixed on the brake drums or brake discs that rotate with the wheels. The friction linings and friction blocks within them bear external pressure and generate friction to achieve the purpose of vehicle deceleration. Situations where brake pads need replacement include: 1. When the thickness reaches about 0.3cm; 2. When the brake warning light illuminates; 3. When a hissing sound occurs during braking; 4. When the braking effect is significantly weakened. Maintenance methods for brake pads include: 1. Regularly check the thickness of the brake pads; 2. Regularly inspect the wear level of the pads and replace them when they reach the limit; 3. Use specialized tools to push back the brake caliper when replacing the pads; 4. After replacement, press the brake pedal several times to eliminate the gap between the pads and the brake disc; 5. Replace with brake pads provided by the original equipment manufacturer.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.