What are the length, width, and height of the Corolla's body?

2 Answers
LeBraxton
07/29/25 4:08am
The length, width, and height of the Corolla's body are: 4635mm, 1780mm, and 1455mm respectively, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, a trunk capacity of 470 liters, and a curb weight of 1335kg. The Corolla is a compact family sedan under the Toyota brand, featuring a MacPherson independent front suspension and an E-type multi-link independent rear suspension. The Corolla is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 185Nm, paired with a 10-speed continuously variable transmission.
Was this review help?
8
2
Share
MacGenevieve
08/12/25 7:53am
The dimensions of the Corolla, as I recall, are a length of 4635 mm, a width of 1780 mm, and a height of 1435 mm. I usually drive this car in the city and find these dimensions perfectly suited for daily use. The length of around 4.6 meters makes parking relatively easy, especially when reversing in narrow alleys. The width of 1.78 meters ensures the car feels stable on highways without any noticeable swaying. The height of 1.43 meters provides ample space—no pressure in the front seats, and three adults can sit comfortably in the back without feeling cramped. The newer models are significantly larger than the older Corollas, with an extended wheelbase that enhances rear-seat comfort, offering more legroom for family outings. The changes in body dimensions reflect Toyota's design philosophy, which prioritizes practicality and spaciousness, while also impacting handling agility and fuel efficiency. Over time, I've found that the moderate size makes parking convenient and hassle-free, though it's important to adjust the side mirrors carefully in tight spots to avoid scratches.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How to reset the tire pressure monitoring in CRV?

Tire pressure alarm light on, you need to check whether the tire pressure is normal, if the tire pressure is low, fill it up, there is a tire pressure calibration in the settings, after calibration, it will be reset. Honda CRV tire pressure light reset method: 1. Press the arrow button at the lower right corner of the steering wheel until the central display shows personalized settings, then stop. 2. Press the sel/reset button, the central display will show enter/tire pressure monitoring system calibration. 3. Press the sel/reset button again, the central display will show set/tire pressure monitoring system calibration. 4. Press the arrow button at the lower right corner of the steering wheel, the central display will show calibration 2/2. 5. Press the sel/reset button, the central display will show calibration started, and it will be successfully reset in a few seconds.
12
0
Share

What is the situation with the dripping sound under the car after parking?

Here are the reasons for the dripping sound under the car after parking: 1. The dripping sound under the car after parking is not actually dripping water. The sound comes from the three-way catalytic converter, which is a normal phenomenon. It is the sound of the three-way catalytic material expanding and contracting with heat, so there is no need to worry too much. 2. When the car is running, the temperature of the car parts is very high, and they will expand slightly due to heat. After turning off the engine, the heat source is lost, so the temperature will drop due to the influence of the ambient temperature. Additional information: The working principle of the three-way catalytic converter is that when high-temperature exhaust gas passes through the purification device, the purifying agent in the three-way catalytic converter will enhance the activity of the three gases CO, HC, and NOx, promoting them to undergo certain oxidation and reduction chemical reactions to turn into harmless gases.
20
2
Share

How to Shift Gears in a Haval M6 Manual Transmission?

Here is the relevant introduction on how to shift gears in a Haval M6 manual transmission: 1. Shift at appropriate speeds: Gears, vehicle speed, and engine RPM correspond to each other. Shifting at the right moment not only maximizes engine performance but also enhances the driver's enjoyment while ensuring optimal fuel efficiency. 2. Familiarize yourself with the coordination of the accelerator and clutch: When shifting gears, always depress the clutch fully. While releasing the clutch, press the accelerator to make starting and accelerating smoother and quicker. 3. Be cautious when lifting the clutch: You can quickly lift the clutch at the beginning—this distance is called the free travel. As you approach the semi-engagement point, you will feel increased resistance in your foot. At this point, slow down the lifting speed, pause slightly, and then release it gradually. 4. Use accurate shifting gestures: Operate the gear lever in a straight line. Generally, gears 1/3/5 are located above, while 2/4/R are below. For example, if you want to shift from neutral to 1st gear, some drivers might push the lever diagonally toward 1st gear. The correct method is to fully depress the clutch, move the lever to the left, and then push it upward. 5. Stabilize the steering wheel with both hands while shifting: Do not look at the gear lever when shifting, as this can cause the car to veer off course, which is very dangerous while driving on the road.
12
3
Share

What is the reason for the Q3 key not turning?

Audi Q3 key not turning is generally due to the steering wheel being locked. Here is the relevant information: 1. The solution is to turn the steering wheel while turning the car key to start the engine. It is important to note that turning the steering wheel and turning the key must be coordinated. You can apply a little force when turning the key, but be careful not to use excessive force, as this may break the key. 2. The steering wheel lock is a normal anti-theft function. This is a safety feature set by the manufacturer during production. After the car is turned off, if the steering wheel is moved, the car's computer will assume a theft situation and automatically activate the anti-theft function.
14
0
Share

How to adjust the time display on Sagitar?

Sagitar time adjustment method: 1. First start the car, at this time the dashboard lights up. 2. Press the button on the left side of the dashboard to adjust until the hour part of the dashboard time flashes. 3. Then press the first button on the right side of the dashboard, each press increases the displayed hour number by one, adjust to the correct time. 4. Release your hand, wait until the hour part on the dashboard stops flashing, then press the left button on the dashboard to adjust until the minute display part flashes. 5. Press the first button on the right side again, each press increases the number by one, adjust to the correct time, wait until the minute number stops flashing, indicating the time adjustment is completed.
10
4
Share

How to Replace the Battery in a CS10 Key?

Here are the steps to replace the battery in the smart key of a Leopaard CS10: 1. Remove the mechanical key: On the back of the smart key, there is a switch. Press the switch and pull the side where the keychain can be attached to remove the mechanical key. 2. Open the smart key: Prepare a small screwdriver. At the other end of the mechanical key slot, there is a small service hole. Insert the screwdriver into the hole to pry open the outer shell of the smart key. 3. Now you can see the key battery. Replace it with the same model of smart key battery. The CS10 key uses a CR2032 battery. 4. Reassemble in reverse order and test it.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.