···
Log in / Register

What are the left and right feet in a car?

3 Answers
Archie
08/29/25 5:32am
In an automatic transmission car, the right foot must be on the accelerator or brake pedal; in a manual transmission car, the left foot must be on the clutch pedal. Below is a related introduction about driving a car: 1. Precautions: Do not drink alcohol before driving. Everyone knows that drunk driving is prohibited. Do not wear headphones while driving, as they can interfere with hearing external sounds and affect your judgment. Ensure regular maintenance before driving and check the vehicle's condition before each trip. 2. Good habits: It is best to walk around the car to inspect the vehicle's exterior and tires for any abnormalities before driving. After getting into the car, first adjust the steering wheel position, then adjust the seat, and ensure a proper driving posture before starting the engine and shifting into gear to depart.
Was this review help?
14
1
Share
DelBrynlee
09/11/25 3:16am
After driving manual transmission cars for so many years, my left foot is primarily responsible for pressing the clutch pedal—depressing it allows gear shifting or starting the car. Meanwhile, my right foot alternates between the accelerator pedal for acceleration and the brake pedal for deceleration. This design enhances the sense of engagement, making driving feel like operating a precision machine. During traffic jams, frequent clutch pressing with the left foot can be tiring, but muscle memory develops over time, helping avoid common mistakes like confusing the accelerator for the brake. Automatic transmission cars are simpler—the left foot mostly rests while the right foot handles both acceleration and braking. Understanding this division of labor improves safety. Driving instructors always emphasize keeping the left foot dedicated to the clutch and training the right foot to switch flexibly, reducing accident risks. In city driving, proper foot coordination alleviates fatigue and adds enjoyment. Never underestimate these small details—they form the foundational framework of everyday driving.
Was this review help?
10
3
Share
Expand All
VeraMarie
10/25/25 4:05am
For driving safety, I've developed the habit of using my right foot exclusively for the accelerator and brake pedals, while my left foot (if equipped with a clutch) is only used for gear shifting operations. This clear division of labor helps prevent accidents caused by mistakenly pressing the accelerator during emergency braking. This design originates from automotive engineering principles that promote natural body coordination and reduce distracting factors. In daily driving, confirming pedal positions becomes routine practice. When driving automatic transmission vehicles, right-foot dominance makes operation more effortless and convenient. During vehicle inspections, pay attention to pedal responsiveness and wear, addressing any stiffness through timely maintenance to avoid sticking risks. This not only enhances driving comfort but also improves braking effectiveness in adverse weather conditions like rain. Once mastered by beginners, these safe driving skills provide lifelong benefits. Statistics show that many rear-end collisions stem from pedal confusion, making this knowledge crucial.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What is the definition of running a red light?

Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at signal-controlled intersections or road sections, crossing the stop line and continuing to move. According to Article 26 of the Road Traffic Safety Law: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44 states: Motor vehicles passing through intersections shall proceed according to traffic signals, traffic signs, traffic markings, or the direction of traffic police. Article 2, Section 1, Clause 2 of the Scoring Standards for Road Traffic Safety Violations stipulates that driving a motor vehicle in violation of traffic signal lights will result in a penalty of 6 points per violation. Here are some tips to avoid running a red light: Check arrow lights first, then circular lights: Currently, there are two types of signal lights: arrow traffic lights and circular traffic lights. When arrow lights are present, checking the arrow lights first and then the circular lights can help avoid running a red light. Note: When encountering a circular red light, right turns are allowed; when encountering an arrow signal light with a red right-turn arrow, right turns are prohibited, otherwise it will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, electronic cameras will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, passage through the intersection is prohibited; wait for the green light before proceeding. Check the countdown on green lights before proceeding: When the green light flashes, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, passage is allowed to avoid running a red light due to delayed braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China states for motor vehicle and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signal lights, non-motor vehicles and pedestrians shall follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, one can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult for electronic police to clearly see the traffic lights. Blurred evidence photos may result in accidental red-light running, for which traffic police will not impose penalties.
3
0
Share

To what level should the coolant be filled in the Magotan?

The coolant for the Magotan should be filled into the small reservoir on the left side of the engine compartment that contains pink liquid, up to the level between the two horizontal lines. Taking the 2021 Magotan as an example, it belongs to the mid-size car category with body dimensions of: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66L, and trunk capacity 533L. The 2021 Magotan is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
4
2
Share

Why Do Tires Blow Out in Summer?

The reasons for tire blowouts in summer are: 1. Air pressure issues; 2. Worn tread patterns; 3. Excessive wear on the tire surface or corrosion by oil substances; 4. Internal damage to the tire or bubbles in the tire cord layer. Methods for tire maintenance: 1. Regularly check tire pressure: The tire pressure value should be based on the standard recommended by the car manufacturer; 2. Regularly rotate tires: After the vehicle has been driven for a certain number of kilometers, the owner can swap the car's tires in a diagonal pattern; 3. Timely wheel balancing and four-wheel alignment: When the car has been involved in a collision accident, or if abnormal conditions such as wheel or steering wheel shaking, deviation, or increased steering effort are noticed during driving, the owner should promptly take the vehicle to a repair shop to determine whether wheel balancing or four-wheel alignment is needed.
9
2
Share

What is the model of Nissan's variable compression ratio engine?

Nissan's variable compression ratio engine model is VC-Turbo, which is a 2.0L 4-cylinder naturally aspirated engine. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning the expanded gas in a sealed cylinder to push the piston to do work. Nissan models include: Bluebird, Sylphy, Teana, Murano, X-Trail, Qashqai, etc. Taking the 2021 Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and trunk capacity 510L.
1
2
Share

What material is the Toyota Corolla valve stem made of?

Toyota Corolla valve stems are made of rubber material, which serves the function of inflating and deflating tires. Taking the 2021 Toyota Corolla as an example, it belongs to the compact car category with body dimensions of: length 4635mm, width 1780mm, height 1455mm, wheelbase 2700mm, fuel tank capacity 50L, and trunk capacity 470L. The 2021 Toyota Corolla features a front MacPherson strut independent suspension and a rear E-type multi-link independent suspension. It is equipped with a 1.2T turbocharged engine delivering maximum horsepower of 116PS, maximum power of 85kW, and maximum torque of 185Nm, paired with a 10-speed continuously variable transmission.
3
4
Share

What are the differences between the VV6 and VV7?

The differences between the VV6 and VV7 are: 1. Different tire specifications: the VV6 tire specification is 225/60R18; the VV7 tire specification is 235/55R20. 2. Different body dimensions: the VV6 body length, width, and height are 4625mm, 1860mm, and 1720mm respectively; the VV7 body length, width, and height are 4760mm, 1931mm, and 1655mm respectively. Both the VV6 and VV7 are equipped with a 2.0T turbocharged engine, with a maximum horsepower of 227PS, a maximum power of 167kW, and a maximum torque of 387Nm.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.