What are the items included in a car's first maintenance?

1 Answers
LaPatrick
07/30/25 4:29am
During a car's first maintenance, the tire tread and pressure are checked, small stones on the tires are removed, and a four-wheel alignment check is performed. Below are the specific items included in a car's first maintenance: 1. Inspect and tighten all mechanical connection nuts in the engine compartment and throughout the vehicle; check the tire tread and pressure, remove small stones from the tires, and perform a four-wheel alignment check. 2. Replace the engine oil and oil filter. Based on the condition of the replaced oil, assess whether the engine's machining precision is good. If the oil is not very black, flows well, and is not too thick, it indicates good machining precision. If the drained oil is very black and thick, it suggests significant wear on the mechanical metal surfaces of the engine and transmission during the break-in period. Check whether the power steering fluid level meets the specified requirements and inspect all oil pipe interfaces in the system for leaks. Check whether the car's coolant level is within the specified range.
Was this review help?
2
0
Share
More Forum Discussions

What car brand is the 'h' logo?

The 'h' logo represents Honda. Its vehicle lineup includes models such as the Accord, Avancier, Vezel, Honda CR-V, and RDX. Taking the 2021 Accord Luxury Starry Sky Limited Edition as an example, it falls under the midsize car category with the following dimensions: length 4893mm, width 1862mm, height 1449mm, a wheelbase of 2830mm, and a fuel tank capacity of 56 liters. The 2021 Accord Luxury Starry Sky Limited Edition is equipped with a 1.5T turbocharged engine, delivering a maximum power of 143kW at 5500rpm and a peak torque of 260Nm, paired with a continuously variable transmission (CVT).
7
0
Share

How many cylinders does the Mercedes-Benz C180L engine have?

The Mercedes-Benz C180L is equipped with a four-cylinder engine, featuring a 1.6-liter displacement engine that delivers a maximum power and torque of 115kW and 230Nm, respectively. This is 15kW and 50Nm higher than the BMW 318i with a 2.0-liter displacement. A four-cylinder engine, also known as a four-cylinder powerplant, is a machine capable of converting one form of energy into another more useful form, typically transforming chemical energy into mechanical energy. The engine's structure mainly consists of the cylinder block, crankcase, cylinder head, and cylinder gasket, among other components. Its fundamental principle involves converting the thermal energy of gasoline into mechanical energy by pushing the piston to perform work through the expansion of gas combustion within a sealed cylinder. The primary applications of four-cylinder engines include powering car engines, motorcycles, chainsaws, and other small-power machinery.
12
4
Share

What Tier Does Bowers & Wilkins Belong To?

From its inception, Bowers & Wilkins has been guided by the belief of its co-founder John Bowers to 'remain true to the essence of sound,' a philosophy that permeates all its products. It enjoys a favorable reputation. Below is an introduction to Bowers & Wilkins: 1. Automotive Audio: From high-fidelity speakers, home theater systems, and new media products to car audio, every Bowers & Wilkins product perfectly embodies the highest standard of pristine sound quality. The audio quality is like a flawless, transparent window that captivates your senses, allowing every authentic note and subtle nuance to flow out untouched, delivering an immersive auditory experience. 2. Collaboration: In 2012, Bowers & Wilkins officially announced a long-term partnership with the Italian luxury car brand 'Maserati' to jointly develop and produce a new high-performance automotive audio system. This system has been exclusively installed in Maserati vehicles since 2013.
20
2
Share

What are the requirements for choosing car tires?

Prioritize the original equipment manufacturer (OEM) tires for your vehicle, as their specifications are best suited for the car's speed and maximum load capacity. Below are relevant details about tires: 1. Wear: All tires have wear indicators. There are triangular marks on the sidewall; when the tread wears down to the level indicated by these marks, replacement is recommended. Inside the tread grooves, there are also raised markers; when the tread wears down to the level of these raised markers, it's time to replace the tire. Simple punctures can be repaired without needing replacement, but bulges must be replaced. 2. Aging: Rubber oxidizes in the air, causing it to harden and reduce grip. Therefore, even if a set of tires is not used, their lifespan will decrease. It is not recommended to use tires for more than 5 years from their production date. The production date can be found on the tire's sidewall.
20
0
Share

Does Car Air Conditioning Consume the Same Amount of Fuel Whether Set High or Low?

Car air conditioning does not consume the same amount of fuel whether set high or low. Regardless of the type of compressor, lower air conditioning temperatures inevitably lead to higher fuel consumption. Higher fan speeds also increase fuel consumption, with temperature having a significant impact on fuel usage. Therefore, there is no need to set the air conditioning temperature too low. The purpose of car air conditioning is to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle to a comfortable state, providing passengers with a pleasant environment, reducing travel fatigue, and creating optimal working conditions for the driver. It serves as a crucial ventilation device for ensuring safe driving. Most cars use an integrated heating and cooling air conditioning system, where components like the evaporator, heater core, centrifugal blower, and control mechanisms are assembled together, forming the air conditioning unit assembly.
2
5
Share

What are the main impacts of foggy weather on safe driving?

Foggy weather's main impacts on safe driving: Due to heavy fog causing poor visibility of road conditions, especially when visibility is very low, the distance that can be seen ahead is also very short. At this time, the vehicle speed should not be too fast to prevent accidents. Meanwhile, front and rear fog lights should be turned on. In severe fog, it is best to turn on the hazard lights to warn vehicles behind. The following is an introduction to car fog lights: 1. Position and function of fog lights: Fog lights are installed at the front and rear of the car, used to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and surrounding traffic participants. 2. Types and colors of fog lights: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually bright yellow, while rear fog lights are red. 3. Correct use of fog lights: Because fog lights are bright and have strong penetration, they do not produce diffuse reflection due to fog. Therefore, correct use can effectively prevent accidents. In foggy weather, front and rear fog lights are usually used together.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.