What are the items for car maintenance?

2 Answers
DiMax
07/23/25 11:39pm
Car maintenance items include: 1. Checking and replenishing fuel and lubricants; 2. Cleaning the interior and exterior of the vehicle, as well as the engine and chassis; 3. Checking the oil levels of the generator, transmission, rear axle, and steering gear; 4. Adding lubricants as specified, ensuring all oil nozzles on various parts of the vehicle are fully equipped and effective, and filling them as required; 5. Inspecting the connection and tightening conditions of the steering gear, tie rods, and steering arms. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle. Its main purposes are: 1. To maintain the vehicle's appearance and ensure normal technical conditions; 2. To eliminate potential hazards and slow down the deterioration process; 3. To extend the service life.
Was this review help?
18
3
Share
Gutierrez
08/10/25 7:28pm
I've always driven domestic cars, and the main maintenance items include changing the engine oil and oil filter, done every 5,000 kilometers to keep the engine running smoothly. Tire pressure also needs to be checked, as insufficient pressure increases fuel consumption and raises the risk of a blowout. Brake pads should be inspected for wear—I didn’t understand this as a beginner, but now I check them during every maintenance session, prioritizing safety. A dirty air filter can affect acceleration, so I often clean it myself to save money and hassle. Coolant levels also need monitoring, especially since they tend to evaporate in summer. Regular maintenance like this keeps the car driving smoothly and prevents breakdowns, avoiding costly repairs. Remember, simple maintenance is the key to a long-lasting car—don’t wait until it breaks down to fix it.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

How to Check Vehicle Speed?

The actual speed is 3 to 4 kilometers per hour slower than the speed displayed on the dashboard. Open Baidu Maps on your phone, which can display some fixed speed detection points and the actual driving speed of the vehicle. Use professional automotive electronic speed measurement equipment.
14
1
Share

What to Do When the Electric Car Screen Stays On?

Turn the power on and then off, listen for a "beep" sound to deactivate the alarm; if you hear three "beep beep beep" sounds, repeat the process until you hear a single "beep" sound. When the display screen remains lit, it is often due to rain affecting it. First, deactivate the alarm, then visit an after-sales service station.
4
0
Share

What does the 'tripa' on the car dashboard mean?

Car dashboard 'tripa' represents the trip mileage, which can be used to record the kilometers traveled for each trip. The 'tripb' on the left of 'tripa' represents the total mileage of the vehicle. 'Tripab' specifically refers to the distance from point A to point B. When needed, you can reset the displayed number to zero when starting from point A, and the number displayed upon reaching point B will be the distance between the two points. Both can be set to clear at different times and under different timing conditions. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Different cars have different instrument panels, but conventional car dashboards generally include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge.
3
1
Share

How to Remove the Rear Tire of a Scooter?

Remove the bracket of the right rear shock absorber. Some right shock absorbers may obstruct the removal of the rear wheel, so it's necessary to detach the right rear shock absorber. Step on the wrench After loosening the nut, gently tap and vibrate the rear axle with a hammer to loosen the splines between the rear wheel and the axle, then the rear wheel can be removed.
11
1
Share

Installation of Guide Rails and Lead Screws?

Remove burrs and debris, place the guide rail against the reference surface, and tighten the bolts. Ensure each bolt leaves a gap in the guide rail mounting hole for later adjustments. Use a torque wrench to gently secure the bolts, pressing the clamping blocks against the rails. After both guide rails are installed as described, use a dial indicator to check the parallelism between them. Once installation is complete, move the worktable to confirm if the resistance is normal.
19
2
Share

How to Ride a Regular Motorcycle?

Hold the clutch with your left hand, pull it all the way in until there is no gap between the clutch and the handlebar, then step on the motorcycle's gear shift lever. Slowly release the clutch while gradually twisting the throttle with your right hand, and the motorcycle will start moving.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.