What are the interior space dimensions of the Odyssey?

What does the stop yield line mean?

Stop yield is generally set at intersections with poor visibility and no traffic lights, meaning that vehicles must stop and observe before proceeding. 1. Sign: The stop yield line consists of two white-painted lines. It indicates that vehicles must stop beyond the stop line to look out and confirm safety before being allowed to proceed. The stop line is the most common, this line is a solid white line, indicating the position where vehicles wait for the signal to proceed, and must not cross or press this line. 2. Meaning: "Stop yield" is a traffic prohibition sign, an octagon with "STOP" in the middle, meaning to stop at the intersection at the stop line to observe before proceeding. The stop yield line consists of two white-painted lines. It indicates that vehicles must stop beyond the stop line to look out and confirm safety before being allowed to proceed. 3. Location setting: Stop yield signs are set in the following situations: 1. At intersections of branch roads intersecting with main roads with heavy traffic; 2. At unattended railway crossings; 3. Other places where it is necessary to set.

11

4

Share

How to switch from D gear to S gear in an automatic transmission?

To switch from D gear to S gear in an automatic transmission, simply shift the gear lever from D to S while driving normally; there is no need to press the brake or come to a complete stop. D gear is the drive mode, where the vehicle prioritizes comfort and fuel efficiency. S gear is the sport mode, which focuses on high performance. When shifted into S gear, the transmission delays upshifting to allow the engine to deliver greater power. The correct way to use an automatic transmission is as follows: 1. Start the vehicle in P or N gear. To shift out of P gear, press the brake, turn on the ignition, and then shift to N gear. After starting the engine, shift to D gear to move forward. 2. When switching between N, D, and L gears, there is no need to press the shift button. However, when shifting from L gear to lower restricted gears, press the shift button. Shifting from lower to higher gears does not require pressing the shift button. 3. Do not shift into N gear while driving to coast. 4. Do not push into P gear while driving. 5. After driving, you must turn off the engine and shift into P gear before removing the key.

11

1

Share

Should an Automatic Transmission Car Be Shifted to Neutral at a Red Light?

Whether to shift an automatic transmission car to neutral at a red light depends on the situation: 1. Shift to neutral if the red light lasts more than 30 seconds; 2. Simply apply the brake if the red light lasts less than 30 seconds. An automatic transmission refers to a system where the driver does not need to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Precautions for shifting gears in an automatic transmission car: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting; 3. The vehicle can only be started in P or N gear; 4. The gear lever must be shifted from P gear while the brake is pressed; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing direction, switching between D and R gears should only be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the internal components of the transmission to overheat and become damaged.

14

0

Share

Can a Color-Changing Film Be Registered?

According to Article 6 of Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, there is no need to apply for a change registration. Conversely, if it exceeds 30%, it must be registered and filed, and the registration must be completed within 10 days after the vehicle's color change. Precautions for Vehicle Color Change: Before preparing to change the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to confirm whether the region permits motor vehicles to change colors. If the region does not support this method, the registration procedure cannot be completed after the change, and the vehicle must be restored to its original color. Documents Required for Applying to Change the Body Color of a Motor Vehicle: "Application Form for Motor Vehicle Change Registration." Identity proof of the motor vehicle owner and agent. Motor vehicle registration certificate. Motor vehicle driving license. Additionally, according to the "Motor Vehicle Registration Regulations," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for change registration. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or signal lights that are exclusive to or similar to those of the aforementioned vehicles. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without completing the required change registration, the public security traffic management department may issue a warning or impose a fine. The vehicle may also be impounded and required to be restored to its original color.

3

0

Share

How Long Does It Take to Transfer a Vehicle Registration from Another Location to Local?

Vehicle registration transfer and file extraction require three days for approval. Article 13, Paragraph 1 of the "Motor Vehicle Registration Regulations" stipulates: "The vehicle management office shall, within three days from the date of acceptance, annotate the changes on the motor vehicle registration certificate, retrieve the license plate and vehicle license, issue a temporary license plate valid for 30 days, and hand over the motor vehicle file to the motor vehicle owner." It can be seen that the approval period for file extraction is three days, calculated from the date of acceptance by the vehicle management office. Below is the process for file extraction and transfer: 1. Tracing number: Obtain a tracing number card and trace the number at the transfer hall, indicating that the vehicle is being relocated. 2. Valuation: Take the vehicle license, registration certificate, tracing number slip, invoice or transfer ticket to have the vehicle valued, indicating that the vehicle is being relocated. 3. Obtain processing number: Select the relocation option at the hall entrance according to the vehicle number. 4. Submit documents: Same as local transfer, plus the tracing number and a copy of the vehicle license. 5. Submit license plate: Submit the relocation authorization letter, "Motor Vehicle Transfer Application Form", vehicle license, buyer's ID and two copies, registration certificate, vehicle license plate, and license plate fee at the window, and receive a receipt. 6. File extraction: After submitting the license plate, collect the file from the vehicle management office headquarters after 3 working days. 7. Issue temporary license plate: The vehicle management department issues a temporary license plate to the owner. 8. Destination: After the motor vehicle arrives at the destination, the owner can use the file to complete the transfer-in procedures at the relevant unit.

5

4

Share

How Many Years for Mandatory Vehicle Scrapping?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat cars and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial cars, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles 10 years, and large taxi passenger vehicles 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles 10 years, and large and medium commercial passenger vehicles 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Change, Transfer, Modification, Suspension, or Scrapping" and stamp the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period but are deemed to meet the scrapping standards after inspection, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle and photograph the vehicle after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the inspection office for verification and signature. The license plates will be reclaimed, and the case will be submitted for approval to complete the scrapping registration. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle cannot be driven back to the registration location due to damage, the owner can submit the vehicle for scrapping to a local recycling company. Commercial vehicles converted to non-commercial use must be scrapped according to the original commercial vehicle scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle, the original owner can apply to use the original license plate number when registering a new vehicle. The application must meet the following conditions: (1) submitted within six months after the transfer or cancellation; (2) the owner must have owned the original vehicle for more than three years.

20

5

Share

What are the interior space dimensions of the Odyssey?

What does the stop yield line mean?

How to switch from D gear to S gear in an automatic transmission?

Should an Automatic Transmission Car Be Shifted to Neutral at a Red Light?

Can a Color-Changing Film Be Registered?

How Long Does It Take to Transfer a Vehicle Registration from Another Location to Local?

How Many Years for Mandatory Vehicle Scrapping?

What does the white dashed line in the middle of the road indicate?

What Happens If You Pour Water into a Car's Exhaust Pipe?

Does the Fuel Pump Automatically Shut Off When the Tank is Full?

Which BYD S6 model uses a Mitsubishi engine?