What are the hybrid parameters of the Alphard 2.5?

Can I buy a Magotan GTE without a charging pile?

When purchasing the Magotan GTE, the manufacturer provides a 10A plug with the vehicle, which is an onboard charger rated at 8A current. It can be directly plugged into a 220V household three-hole socket for charging. The rated power of this onboard charger is 1.7KW, meaning it charges 1.7 kWh per hour. Here are some extended details about the Magotan: 1. Battery capacity: The Magotan GTE is equipped with a 13kWh lithium-ion battery, which equals 13 kWh of electricity. Using the onboard charger provided with the vehicle, the time required to charge from 0 to full is 13kWh ÷ 1.7kW = 7.6 hours. Considering the battery won't be completely drained, it generally takes about 7 hours to fully charge. 2. Body dimensions: The length, width, and height are 4865/1832/1469 mm respectively, with a wheelbase of 2871 mm. In terms of height, it is 2 mm shorter than the new model.

15

2

Share

How much fuel does a 460-horsepower engine consume at idle for one hour?

460-horsepower engine consumes eight liters of fuel per hour at idle. The fuel consumption of a car varies slightly depending on each driver's habits and skills. A smoother driving style results in lower fuel consumption, while aggressive driving habits such as frequent high-revving operations like overtaking will appropriately increase fuel consumption. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a major cause of high fuel consumption. If the cooling effect is poor, the fan speed will increase, and the temperature will be lowered to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement cars: For vehicles exposed to the sun, do not turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. After the car has cooled down moderately, then turn on the air conditioning.

3

0

Share

How to Clear the Maintenance Reminder on Geely Boyue?

Depending on the combination meter configuration, there are two methods to reset the maintenance reminder on Geely Boyue: Method 1: 1. Start the vehicle; 2. Press the "SET" button to enter the instrument settings interface; 3. Locate the "Maintenance Reset" option in the settings; 4. Click to confirm the reset. Method 2: 1. Start the vehicle, after the dashboard lights up, press the TRIP button on the left side of the lever to activate instrument controls; 2. Use the volume keys on the right side of the steering wheel to navigate to the settings system; 3. Press the "MODE" button to enter the settings system; 4. Use the "left-right cycle" buttons on the steering wheel to find the maintenance mileage option; 5. Press the "MODE" button to enter the maintenance mileage system; 6. The interface will display "Return" and "Reset" options - use the "left-right cycle" keys to select "Mileage Reset", then press "MODE" to confirm; 7. This will reset the maintenance mileage counter.

6

2

Share

What is the BMW air conditioning auto function?

BMW air conditioning auto is the automatic mode of the air conditioning. When pressed, the air conditioning will operate in automatic mode, automatically adjusting the airflow and the compressor's engagement based on the set temperature and the actual ambient temperature. If the car makes a vibrating sound as soon as the air conditioning is turned on, it may be due to the following reasons: 1. Dirty air filter: A dirty air filter can cause excessive noise and abnormal sounds. 2. Debris in the blower fan blades: Debris in the blower fan blades can cause abnormal sounds. You can test this by turning on the blower without starting the engine to see if the sound appears. If it does, the issue is likely with the blower. 3. Fan issues: Deformed fan blades or a damaged fan motor in the car's air conditioning system. 4. Worn clutch bearing: A worn clutch bearing in the air conditioning pump can cause the engine sound to become louder when the air conditioning is turned on. This component cannot be replaced individually; the entire air conditioning pump assembly must be replaced.

6

1

Share

Where is the PCV valve located on the Baojun 730?

The PCV valve of the Baojun 730 is located inside the crankcase. Here are the specific details: 1. Function of the PCV valve: At the end of the engine's combustion process, some unburned mixture leaks into the crankcase from the piston rings under high pressure. These blow-by gases can escape into the atmosphere, causing pollution. If these gases are not removed, they can dilute the engine oil in the crankcase, leading to oil degradation and premature wear of engine components. Therefore, a PCV valve is installed on the valve cover to allow these exhaust gases to re-enter the engine through the intake manifold for re-combustion. 2. Working principle of the PCV valve: The PCV valve is controlled by vacuum. When the engine is idling, the intake manifold has vacuum, which causes the plunger to be directly sucked against the spring force, preventing the exhaust gases from flowing. At high speeds, the spring force holds the plunger in place, also preventing the exhaust gases from flowing. At medium speeds, the vacuum suction from the engine's intake manifold overcomes half of the spring force, causing the plunger to wobble within the valve body, allowing the exhaust gases to start flowing into the intake manifold.

19

3

Share

Can You Turn in 5th Gear?

It is possible to turn in 5th gear, but it is quite dangerous and not recommended. When a car needs to make a turn, you should decelerate and downshift to 2nd gear in advance. Applying light throttle while entering the turn with the gear engaged helps reduce vehicle roll. During a turn, you need to operate the transmission gear lever to select the appropriate gear based on the engine power and the speed while turning. Here are some safe methods for turning: 1. The speed should not be too fast when turning. Reduce speed before entering the turn and go through the turn slowly. Avoid using emergency brakes and meeting other vehicles in the curve whenever possible. 2. When turning, the steering wheel operation should coordinate with the speed. Turn and return the wheel as needed, and adjust the turning angle according to the actual situation. Otherwise, it is easy to lose control and cause an accident, and it also makes it difficult for the driver to observe oncoming vehicles in the curve. 3. When turning, always check the rearview mirror to ensure there are no vehicles or pedestrians behind or to the side before making the turn, to avoid collisions caused by forced turns.

16

2

Share

What are the hybrid parameters of the Alphard 2.5?

Can I buy a Magotan GTE without a charging pile?

How much fuel does a 460-horsepower engine consume at idle for one hour?

How to Clear the Maintenance Reminder on Geely Boyue?

What is the BMW air conditioning auto function?

Where is the PCV valve located on the Baojun 730?

Can You Turn in 5th Gear?

What Causes the Flashing Warning Light, Shaking, and Weak Acceleration?

What is the appropriate tire pressure below standard in hot weather?

What is the appropriate tire pressure for BMW X3 run-flat tires?

How Much Higher is the Fuel Consumption of AWD Compared to 2WD?