What are the hybrid models of Volkswagen?

What Causes a Car Steering Wheel to Shake Left and Right?

Steering wheel shaking is primarily due to lack of lubrication or component damage. Causes of car steering wheel shaking: Lack of lubricating oil in the shock absorber plane bearing; Loose or damaged stabilizer bar bushings; Lack of lubricating oil in the steering column dust cover; Lack of lubricating oil or damage to the steering wheel airbag clock spring. The steering wheel is a wheel-shaped device that controls the driving direction, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Solutions: Apply grease to the plane bearing or replace it; Add shims to the stabilizer bar bushings; Apply grease inside the dust cover; Remove the steering wheel's airbag clock spring, apply grease, or replace it.

9

0

Share

What are the screen functions of the Inspire Delicate Edition?

inspire Delicate Edition screen features include Vehicle Stability Control, Hazard Warning Lights, Auto Hold, and Air Recirculation functions. Auto Hold function: In situations like traffic lights where the vehicle stops, after releasing the brake pedal, the Auto Hold function will lock the wheels, relieving the driver's foot fatigue. When the driver presses the accelerator pedal again, the electronic parking will unlock the wheels. Air Recirculation function: Air Recirculation means heating or cooling the air inside the car and then sending it back into the cabin, while Fresh Air mode allows outside air to enter the car. During traffic jams, in tunnels, or when the outside air quality does not meet standards, prioritize using Air Recirculation. On highways, switch to Fresh Air mode periodically to ventilate the cabin and prevent health issues caused by stale air.

2

3

Share

How many bottles of fuel additive should be added each time?

Usually, the initial use requires 2 bottles, followed by 1 bottle for subsequent uses. Fuel additive usage: Fuel additives are unnecessary for new vehicles with less than 20,000 kilometers of mileage. For vehicles exceeding 20,000 kilometers, they should be added as needed, typically one small bottle per tank of fuel. Long-term use of fuel additives can be harmful to the engine. Excessive use can increase carbon deposits in the combustion chamber, and prolonged overuse may even lead to engine knocking, detonation, and worsened vehicle emissions. Precautions: New vehicles are not recommended for fuel additive use, as they have not been driven many kilometers and generally operate under good conditions, with minimal carbon deposits. Frequent use of fuel additives is not advisable, as it can lead to oil sludge, gum formation, and increased carbon deposits in the combustion chamber. Instead, additives should be used based on the vehicle's specific conditions. For severe carbon deposits, manual cleaning is still necessary. Fuel additives are not a miracle solution; vehicles with heavy carbon buildup require manual treatment, as additives cannot completely remove them. For older vehicles, the oil filter should be cleaned or replaced before adding fuel additives. Use fuel additives cautiously and rationally according to the vehicle's condition.

8

5

Share

Does Only Capturing the Front Count as Driving Against Traffic?

Generally, driving against traffic requires capturing both the front and rear license plate numbers in two images to be considered a traffic violation. Principle of Capturing Driving Against Traffic: Typically, there are two vehicle detection loop sensors installed at the front and rear of the motor vehicle lane—Sensor 1 and Sensor 2. Normally, vehicles should pass Sensor 1 first, followed by Sensor 2, which does not trigger the electronic police to take photos. If a vehicle is driving against traffic, it will pass Sensor 2 first, then Sensor 1, reversing the normal sequence, which triggers the electronic police to capture images. Determination of Driving Against Traffic: On roads with solid dividing lines (double solid lines or single solid lines), vehicles must not cross the line under any circumstances. If a motor vehicle enters the opposite lane, it is considered driving against traffic. On roads with dashed dividing lines, vehicles may overtake by borrowing the opposite lane if it is safe, but in the event of an accident, the borrowing vehicle will be deemed to be driving against traffic. On roads with one-way signs, any motor vehicle entering is considered to be driving against traffic.

14

5

Share

What Causes a Dash Cam to Suddenly Display Color Stripes?

Dash cams may suddenly display color stripes due to hardware issues or memory card problems. Hardware Issues: If the dash cam screen flickers with stripes (also known as screen distortion), first try pressing the reset button. If this doesn't resolve the issue, it is likely a hardware problem. This situation may arise due to quality issues with the dash cam itself, in which case repair or replacement is recommended. Another possible cause is incorrect light source frequency settings. The frequency should be adjusted according to the local power supply standards—generally, 50Hz for China and 60Hz for other countries. Memory Card Issues: Screen distortion can also be caused by problems with the memory card. If the memory card has slow read/write speeds and cannot keep up with the video processing speed, screen distortion may occur. It is advisable to purchase a memory card with faster read/write speeds, such as a Class 10 memory card.

17

4

Share

What Are the Causes of Electric Vehicle Battery Degradation?

Electric vehicle battery degradation may be caused by increased internal resistance and battery management. Increased Internal Resistance: Internal resistance is an important parameter for measuring battery performance. However, since electric vehicles operate with higher currents, internal resistance has a greater impact on power batteries. It is also influenced by many factors, such as the battery's materials and manufacturing processes. Besides internal resistance, battery management is another key factor affecting battery performance. Good battery management can significantly reduce performance degradation and improve cell consistency. Correct Usage of Electric Vehicle Batteries: Lithium-ion batteries in electric vehicles do not require any special activation method; they naturally activate during use. Deliberately using the widely circulated "12-hour long initial charge activation" method is futile and ineffective. When the battery shows a low-power warning during operation, it should be charged as soon as possible. Not all claims about fully discharging the battery before charging or prolonged charging are correct—it depends on the battery type. Charging should follow standard time and procedures, even for the first three charges. With various lithium battery products on the market, it is advisable to choose high-quality, reputable brand batteries.

13

0

Share

What are the hybrid models of Volkswagen?

What Causes a Car Steering Wheel to Shake Left and Right?

What are the screen functions of the Inspire Delicate Edition?

How many bottles of fuel additive should be added each time?

Does Only Capturing the Front Count as Driving Against Traffic?

What Causes a Dash Cam to Suddenly Display Color Stripes?

What Are the Causes of Electric Vehicle Battery Degradation?

What is the Nissan Patrol?

What to Do If You Connect the Jumper Cables Incorrectly?

Can a 3-meter-wide road make a right-angle turn?

What causes the CR-V to shake when the AC is on but not when it's off?