···
Log in / Register

What are the hand signals of traffic police?

6Answers
MacGarrett
07/28/2025, 03:08:33 PM

Traffic police hand signals include stop, go straight, left turn, left turn waiting, and pull over, among others. Here is the relevant information: Stop and Go Straight: The left arm is extended straight forward and upward with the palm facing forward, indicating that vehicles ahead are not allowed to proceed. The left arm is extended horizontally to the left with the palm facing forward; the right arm is extended horizontally to the right with the palm facing forward and swings to the left, allowing vehicles on the right to proceed straight. Left Turn: The right arm is extended horizontally forward with the palm facing forward; the left arm and hand are extended straight and swing to the right front with the palm facing right, allowing vehicles to make a left turn. A U-turn is permitted if it does not interfere with the passage of released vehicles. Left Turn Waiting: The left arm is extended horizontally to the lower left with the palm facing downward; the left arm and hand are extended straight and swing downward, allowing left-turning vehicles on the left to enter the intersection, approach the center of the intersection along the left turn direction, and wait for the left turn signal. Pull Over: The left arm is extended horizontally forward and upward with the palm facing forward; the right arm is extended horizontally forward and downward with the palm facing left; the right arm swings horizontally to the left, indicating that the vehicle should pull over.

Was this review help?
102
Share
VonDaniella
08/11/2025, 07:00:59 PM

The most common traffic police hand signals include the stop signal, where they raise their arm vertically upward, indicating that all vehicles must come to a complete stop; the go-straight signal is an arm extended straight forward, indicating that vehicles can proceed straight; the left-turn signal involves waving or pointing the arm to the left, instructing drivers to turn left; the right-turn signal is similar but with the arm pointing to the right. These signals are particularly crucial at intersections, helping to reduce misjudgments and accidents. I've noticed that many accidents often stem from drivers being unfamiliar with or ignoring these signals, especially when traffic lights malfunction. Traffic police also use hand signals to indicate slowing down, typically by lowering their arm slowly to signal reducing speed. Although these gestures are simple, their consistent execution can significantly enhance road safety. I believe every daily driver should master them.

Was this review help?
17
Share
Expand All
LaLevi
09/30/2025, 12:58:38 AM

Don't panic when encountering traffic police directing traffic while driving, just remember a few basic hand signals: The stop signal is raising your hand as if blocking the car; if the traffic police officer extends their arm straight forward, it means go straight; waving their arm to the left or right indicates you should turn. When I first started learning to drive, I often confused these, but later understood these details. There's also a signal for slowing down - when the officer's arm slowly moves downward, it means reduce speed and be careful. During peak hours, traffic police use hand signals to replace traffic lights and manage congestion, operating very smoothly. In my early days, I once ignored a signal and nearly caused an issue. Now I realize these signals are especially important in rainy or foggy conditions when visibility is poor, as they become the primary navigation method. Everyone practices these extensively in driving school, but when actually driving, don't forget to pay extra attention.

Was this review help?
6
Share
Expand All
Dianne
09/30/2025, 01:00:56 AM

At intersections, it's common to see traffic police using hand signals for direction. For example, a simple gesture: an arm raised high means stop; if the arm is extended forward, it indicates that it's safe to go straight; for left or right turns, just follow the direction they point. Sometimes at complex intersections, these gestures are accompanied by whistle sounds. I don't drive, but walking daily and observing the traffic flow, I've noticed how effective these signals are, especially at places without traffic lights. I've also seen minor collisions caused by people not understanding these signals, so it's important for pedestrians to know a bit about them—safety first. These are global standards and easy to learn.

Was this review help?
12
Share
Expand All
EmmaMarie
11/13/2025, 01:50:28 AM

Traffic police hand signals originate from unified road regulations and are similar worldwide: the stop signal is an arm raised vertically; going straight is an arm extended forward horizontally; turning left or right involves pointing the arm to the left or right. These signals were promoted starting in the last century to avoid language barriers. Common scenarios include when traffic lights are broken or during large events, where hand signal commands are more flexible. Many people don't know that these signals are also part of the international driver's license test and must be passed. I've researched and found that hand signals significantly reduce accident rates, making them worth remembering. Don't underestimate the meaning of each movement—they have saved lives in emergencies.

Was this review help?
1
Share
Expand All
ArabellaDella
01/03/2026, 03:33:08 AM

After years of driving, it's common to see traffic police using hand signals to control traffic. There are four basic gestures: Stop is signaled by raising the arm vertically upward, requiring all vehicles to halt and await instructions; Proceed straight is indicated by extending the arm forward to allow passage; Left and right turns are signaled by moving the arm to the left or right respectively. Additionally, the deceleration gesture involves slowly lowering the arm to remind drivers to reduce speed. In rainy or foggy weather, these hand signals become even more crucial to avoid blind spot risks. I realized that these were often overlooked during driving lessons and can lead to mistakes, but mastering them proves highly practical. For daily commutes, especially during busy holiday periods, traffic police rely on these gestures to maintain order efficiently and effortlessly. Every driver should review these signals periodically to ensure safety and prevent accidents.

Was this review help?
20
Share
Expand All
More Q&A

What Problems Can Occur with Poor Valve Adjustment?

Excessive valve clearance will result in reduced valve opening, increased intake and exhaust resistance, insufficient intake volume, decreased power performance, and poor exhaust flow. It also increases the impact force of the valve transmission group on the valve assembly, leading to noticeable abnormal noises. Below is an introduction to automobile valve adjustment and related information: Cylinder-by-Cylinder Adjustment Method: Based on the cylinder firing order, after determining that a piston is at the top dead center of the compression stroke, the intake and exhaust valve clearances of that cylinder can be adjusted. Once adjusted, rotate the crankshaft and follow the same method to adjust the valve clearances of the other cylinders step by step. Composition of the Valve: A valve consists of a valve head and a stem. The valve head operates at very high temperatures (intake valve: 570 670K, exhaust valve: 1050 1200K) and is subjected to gas pressure, valve spring force, and the inertial force of transmission components. Due to poor lubrication and cooling conditions, the valve must possess sufficient strength, stiffness, heat resistance, and wear resistance. Intake valves are typically made of alloy steel (chromium steel, nickel-chromium steel), while exhaust valves are made of heat-resistant alloys (silicon-chromium steel). The valve stem is cylindrical and continuously reciprocates within the valve guide, requiring its surface to undergo heat treatment and polishing. The shape of the valve stem end depends on the fixing method of the valve spring. A common structure uses two half-lock pieces to secure the spring seat, with the valve stem end featuring a groove to install the lock pieces.
114
Share

What is the displacement of the new X1?

The new X1 comes with either a 1.5-liter or 2.0-liter displacement. It is equipped with two engines: a 1.5-liter three-cylinder turbocharged engine and a 2.0-liter four-cylinder turbocharged engine. The 1.5-liter three-cylinder turbocharged engine, coded as B38A15C, delivers 140 horsepower and a maximum torque of 220 Nm. Taking the 2021 BMW X1 as an example, it is a compact SUV with a body length of 4565mm, width of 1821mm, height of 1620mm, a wheelbase of 2780mm, and a fuel tank capacity of 61 liters.
115
Share

Where is the license plate with 'Su' from?

Su is the license plate for Jiangsu Province. The license plate codes for various cities in Jiangsu Province are as follows: SuA is Nanjing, SuB is Wuxi, SuC is Xuzhou, SuD is Changzhou, SuF is Nantong, SuG is Lianyungang, SuH is Huai'an, SuJ is Yancheng, SuK is Yangzhou, SuL is Zhenjiang, SuM is Taizhou, SuN is Suqian. License plates, commonly known as vehicle plates, refer to the number plates affixed to the front and rear of vehicles. They are typically made of materials such as aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. License plates serve as a means of numbering and recording information for vehicles, with their primary function being to identify the region to which a vehicle belongs. Additionally, license plates can be used to trace the vehicle's owner and its registration details.
107
Share

How Many Days in Advance Can You Apply for a Driver's License Renewal?

You can apply for a driver's license renewal up to 90 days in advance. According to relevant regulations, drivers must apply for a license renewal within 90 days before the expiration of their current driver's license. Before renewing the license, any traffic violations associated with the driver's license must be resolved. Driving with an expired license is considered driving without a valid license. Regulations for driver's license renewal: If the license has expired for less than one year, you should promptly visit the vehicle management office to renew it. If the license has expired for one to three years, you must apply for a written test (Subject 1) at the vehicle management office and pass the exam to obtain a new license. If the license has expired for more than three years, it will be revoked, and you will need to retake the entire driving test. Required documents include the original ID card, the current driver's license, and three one-inch white-background photos. Locations for driver's license renewal: You can renew your driver's license at the vehicle management office, through the mobile app "Traffic Management 12123," or at police-post convenience service stations. Requirements for applying for a delayed renewal: If a driver is unable to renew the license within the specified time due to reasons such as military service or being abroad, they can apply for a delayed renewal at the vehicle management office where the license was originally issued, within the inspection validity period of the license. The maximum delay period is three years. Note that during the delay period, the driver is not allowed to operate a motor vehicle.
102
Share

What type of engine oil is used in the Volkswagen Polo?

The 1.4L, 1.6L, and 1.4TSI gasoline engines of the Volkswagen Polo use engine oil that meets the VW50200 specification or is compatible with higher VW standards. Additionally, high-quality unleaded gasoline that complies with the GB17930 standard must be used. It is recommended to use genuine 5W-40 specification engine oil, with oil and oil filter replacements every 5,000 kilometers. Introduction to the Volkswagen Polo: 1. The spark plug model for the Volkswagen Polo is Bosch F7HER2. The new Polo's spark plugs are made of nickel alloy. 2. The Volkswagen Polo is equipped with either a Japanese Aisin 5-speed manual transmission or a 6AT automatic transmission. The manual transmission uses FAW-Volkswagen's original transmission oil, with the part number G067026A2, imported from Germany, each bottle containing 1L. The automatic transmission uses Mobil ATF3309 automatic transmission fluid, also in 1L bottles.
102
Share

Why Can't the High Beam Be Turned On in Automatic Mode on a Mercedes-Benz?

Mercedes-Benz cannot turn on the high beam in automatic mode because the vehicle has a high beam obstacle setting. Below are two methods to enable the high beam: 1. Manual Activation (1) Start the engine. Then rotate the lighting switch to the [Low Beam/High Beam] position and push the combination switch past the pressure point. 2. Activation via the Intelligent Light Control System (1) Enable the Intelligent Light Control. Press the left or right button on the left side of the steering wheel to select the [Settings] menu. Press the up or down button on the left side of the steering wheel to select the [Lighting] submenu. Press the middle [OK] button to confirm. Press the up or down button on the left side of the steering wheel to select [Intelligent Light Control]. When [On] or [Off] appears, select [On], then press the middle [OK] button.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.