What are the goals of new energy vehicles?

What Causes the Reversing Camera to Not Respond When Shifting to Reverse Gear?

When the reversing camera does not respond after shifting to reverse gear, it is usually due to the head unit freezing. In this case, the head unit needs to be restarted, and then you can try shifting to reverse gear again. If the reversing camera still does not respond after restarting, it is generally caused by an engine malfunction, and professional inspection and repair at a repair shop or 4S store are required. Below are the specific details: Poor Contact in the Reversing Camera Wiring or Switch: If the connecting cable between the camera and the car display comes loose, or if the reversing camera switch is damaged, it can cause the reversing camera to not display. In this case, the wiring needs to be reconnected, and if necessary, a new switch can be replaced. Reversing Camera Module Malfunction: There are many reasons for the reversing camera module to malfunction, including system disorder, module corruption, or formatting of the reversing camera. In this case, professional inspection at a repair shop is required. Car Battery Depleted: The display of the car reversing camera relies on the car battery for power. When the car battery is depleted, the reversing camera will not display. In this case, the car battery needs to be recharged promptly.

3

4

Share

What to Do When the Car Navigation Screen Doesn't Light Up?

Press and hold the power button to restart and see if it returns to normal. Otherwise, the most likely cause is poor contact in the wiring or aging power signal lines. Precautions for purchasing a car navigation system are as follows: Check the accuracy of the system: Choose one or two familiar road sections or a newly opened hotel to see if the system can accurately display the car's location. Since streets and road sections are constantly changing, the system must also provide regular update services. Consider the storage capacity of the system: In the United States, storing maps of the entire country requires at least three CDs. Therefore, the car navigation system must also have a correspondingly large hard drive memory.

3

Share

How to Perform Throttle Body Adaptation After Cleaning?

After cleaning the throttle body, the adaptation methods include using a diagnostic tool for idle speed learning and manual learning. Below are detailed introductions to both methods: Diagnostic Tool Learning: Perform idle speed learning using a diagnostic tool. Manual Learning: After cleaning the throttle body, it is recommended to use a diagnostic tool for adaptation. Manual operation requires certain time and experience to master for successful execution. It is advisable to visit a repair shop to use a diagnostic tool for idle speed matching, which ensures proper ignition timing and corrects the engine's basic idle speed, guaranteeing stable idle speed during vehicle operation and good fuel economy. The throttle body is a controllable valve that regulates air intake into the engine. The air mixes with gasoline in the intake manifold to form a combustible mixture, which then burns to generate power.

8

1

Share

How to Deal with the Adhesive Residue After Removing Car Window Tint Film?

Methods for dealing with adhesive residue left after removing car window tint film include using solvents or alcohol, a hairdryer, cotton or cloth soaked in vinegar, or a cloth dipped in ethyl acetate. Specific details are as follows: Using solvents or alcohol: Use organic solvents or industrial alcohol, or high-concentration alcohol to wipe the adhesive on the glass. Note that you should use a cloth dipped in the solution and avoid direct contact with water. Using a hairdryer: Use a hairdryer to soften the adhesive on the glass. Once the adhesive weakens, it can be removed more easily. If there are still minor traces, use nail polish remover to wipe them off. Using cotton or cloth soaked in vinegar: Soak cotton or cloth in vinegar and apply it to the adhesive on the glass, covering the entire area where the adhesive residue is present. Once the adhesive is thoroughly soaked, you can slowly and carefully remove it bit by bit. Using a cloth dipped in ethyl acetate: Gently wipe, and the adhesive will come off immediately. Quickly wipe a few more times with a clean cloth. Carefully scrape off any remaining adhesive, then use nail polish remover or hot water to wipe, and it will be completely removed.

2

5

Share

Where is the date on Bridgestone tires?

Bridgestone tires indicate the production date in the same way as other tires. Each tire will display its production date on the sidewall. If consumers want to determine the production date of the tire, they can look for a series of letters and numbers on the tire sidewall, commonly known as the Tire Identification Number (TIN). Additional information is as follows: Definition of automobile tires: Automobile tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the vehicle suspension, they help absorb shocks during driving, ensuring good ride comfort and smoothness. They also ensure good adhesion between the wheels and the road surface, improve the vehicle's traction, braking, and off-road capability, and bear the weight of the vehicle. The important role of tires in automobiles is increasingly being recognized. Tire shelf life: The shelf life of tires is generally 5 years. When replacing tires, the production date should not exceed 3 years. However, tires do not indicate an expiration date, only the production date.

12

4

Share

What is the usage of car lights?

Car light usage is divided into daytime running lights, high beam and low beam lights, and turn signals. The specific introductions are as follows: Daytime running lights: Daytime running lights, also called position lights, serve to make the four corners of the vehicle visible to others, with lower brightness than headlights. These lights should be turned on during rain, dim lighting conditions, or in underground parking lots. High beam and low beam lights: High beams have a higher projection angle than low beams, allowing them to illuminate objects that are higher and farther away. Low beams are generally used on roads with street lighting. High beams are used on roads without lighting and are often employed to illuminate road signs in the distance. Turn signals: Turn signals must be activated in advance when the vehicle needs to turn. Only after confirming there are no vehicles approaching from behind should the turn be made. Avoid turning immediately after signaling without checking the rear situation. Before overtaking, activate the left turn signal and confirm that the road ahead meets overtaking conditions. If a vehicle behind intends to overtake, the right turn signal can be activated to indicate permission. At U-turn or turning lanes before traffic lights, unless you are first in line, there is no need to keep the turn signal on continuously. It is not too late to activate the turn signal when the vehicle actually turns.

6

1

Share

What are the goals of new energy vehicles?

What Causes the Reversing Camera to Not Respond When Shifting to Reverse Gear?

What to Do When the Car Navigation Screen Doesn't Light Up?

How to Perform Throttle Body Adaptation After Cleaning?

How to Deal with the Adhesive Residue After Removing Car Window Tint Film?

Where is the date on Bridgestone tires?

What is the usage of car lights?

How many points are deducted for stalling in Subject 3 of the driving test?

How to Cancel Shanghai ETC?

Is It Illegal to Remove the Rear Seats of a Van?

Are Trucks Exempt from Toll Fees on Highways?