What are the gears of the Fengxing T5 Evo?

2 Answers
LaSteven
07/24/25 7:38am
There are three gear introductions. Press the brake: Hold the button on the left and pull it backward to shift into neutral, then pull it further backward to shift into drive. Pull to the left: You can manually shift up or down. Return it to the center, hold the release button next to it, and push it forward to shift into reverse. P gear: To shift back into P gear, press the brake and press the button once to shift into P gear. Additional information: All gears: The automatic transmission gears include P, R, N, D, 2 or S, L or 1. Parking gear: P gear is the parking gear, also known as the parking position. Other gears: R is reverse, N is neutral, D is drive, also known as the driving gear.
Was this review help?
17
2
Share
DelNolan
08/11/25 3:21am
I've driven the Fengxing T5 Evo, and it has a comprehensive set of gears: P for parking, R for reverse, N for neutral, and D for drive. D is the most commonly used, as the automatic transmission shifts gears based on speed, making it ideal for daily commutes in traffic or highway cruising. N is suitable for brief stops at traffic lights, while R requires careful use of the rearview mirror to ensure safety when reversing. There's also a sport mode—pressing the button makes gear shifts more responsive, which is great for overtaking on mountain roads. The manual mode is quite fun too, using paddle shifters to change gears, simulating the control feel of experienced drivers. The gear design is simple and intuitive, with buttons and a lever, making it easy for beginners to get the hang of it after a few drives. Just remember to shift into P before engaging the handbrake when parking to avoid rolling. Overall, the gear layout is well thought out, paired with a 7-speed dual-clutch transmission for smooth shifts without jerking, offering both economy and comfort.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What is the difference between beamless and beam-type wiper blades?

The differences between beamless and beam-type wiper blades are: 1. Different principles: Beamless wiper blades directly apply force to the steel strip, effectively dispersing the concentrated force to maintain even pressure distribution on the rubber blade; Beam-type wipers press the blade against the windshield through multiple support points on the frame, ensuring uniform force distribution. 2. Different force application methods: Beamless wipers distribute force across the entire rubber blade; Beam-type wipers transmit pressure through layered pressure strips. The wiper system refers to the blade structure installed in front of the windshield, consisting of components such as the motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade. Its function is to clear rain, snow, and dust that obstruct the view on the windshield.
2
3
Share

What Types of Vehicles Can an A1 Driving License Drive?

A1 driving license allows driving large buses (A1), urban buses (A3), medium-sized buses (B1), large trucks (B2), small cars (C1), etc., meaning it can drive all the vehicle types that were originally permitted before upgrading the license. After obtaining an A1 license, if situations such as accumulating 12 penalty points in a scoring cycle, failing to undergo annual review for three consecutive scoring cycles, drunk driving, or being primarily responsible for a traffic accident resulting in death occur, the license level will be downgraded. The permission to drive vehicles is granted through the issuance of a driving license, indicating that obtaining a driving license is a formalized act that must be issued by a specialized authority.
5
3
Share

Why does the car shake violently while driving?

The reasons why the car shakes violently while driving are: 1. Excessive carbon deposits in the intake tract and fuel injectors; 2. Dirty throttle body; 3. Faulty half-shaft; 4. Insufficient cylinder pressure; 5. Engine malfunction; 6. Fuel system failure; 7. Aging engine components; 8. Ignition system failure. The solutions for a car shaking violently while driving are: 1. Clean the fuel system and check if the idle speed motor has carbon deposits, clean it promptly; 2. Check fuel pressure and replace faulty components; 3. Replace brake discs in time; 4. Inspect or replace spark plugs; 5. Check the engine to identify problematic parts; 6. Clean the fuel filter.
11
3
Share

How Heavy is the Counterweight of a 200 Excavator?

Around 7 tons. Below is the detailed introduction of related content: Introduction: The weight is approximately 20T, which is an approximate value. It varies slightly between 19-21T depending on the naming conventions of different brands. Excavators, also known as excavating machinery, are earthmoving machines that use a bucket to dig materials above or below the machine's surface and load them into transport vehicles or unload them to stockpile yards. Materials excavated by excavators: mainly include soil, coal, sand, and pre-loosened soil and rocks. From the development of construction machinery in recent years, excavators have developed relatively quickly and have become one of the most important construction machines in engineering projects. The three most important parameters of an excavator: operating weight (mass), engine power, and bucket capacity.
17
5
Share

Why Downshift for Overtaking?

Downshifting for overtaking is done to obtain greater power. The moment the gear is downshifted, the engine speed immediately increases while the vehicle speed remains unchanged. Due to the increased transmission ratio, the torque output from the engine to the wheels also becomes greater. After completing the downshift operation, the vehicle typically decelerates by reducing the throttle (so-called deceleration downshifting). Because the torque output increases, continuing to press the accelerator will generate significant acceleration, allowing the vehicle to speed up quickly. Overtaking refers to the process where the following vehicle changes lanes to the rear side of the leading vehicle, passes it, and then returns to the original lane. The lane usually used for overtaking is the inner lane, which is closer to the center of the road and farther from the shoulder.
12
2
Share

How to Turn on the Fog Lights of the Volkswagen Tharu?

To turn on the fog lights of the Volkswagen Tharu, follow these steps: The switch is located below the left side of the steering wheel. First, turn on the headlight switch, then pull the knob outward. Pulling it once activates the front fog lights, and pulling it again activates the rear fog lights. Functions of fog lights: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear, serving to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot your car in low-visibility conditions. The Tharu features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of configuration, the Tharu comes standard with a tire pressure monitoring system, front and rear parking radar, drive mode switching, auto hold, and other features.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.