What are the functions of all the buttons in the new CR-V?

1 Answers
AlexRose
07/30/25 7:09am
Honda CR-V interior button instructions are as follows: 1. Vehicle Stability Assist (VSA): The system is enabled by default. It is not recommended to turn it off unless on slippery roads such as during rain or snow. 2. Parking Sensors/Image: Warns of surrounding obstacles through images and alarm sounds. 3. Recirculation/Fresh Air Mode: Recirculation mode means the air inside the car is self-sufficient, while fresh air mode allows air exchange between the inside and outside of the vehicle. Use recirculation mode in congested areas or environments with poor air quality. On highways, switch to fresh air mode approximately every hour to replace the air inside and outside the car to prevent oxygen deprivation. 4. Auto Hold: Eliminates the need to keep your foot on the brake pedal; the system automatically locks the wheels. Press the accelerator again to continue driving. 5. Auto Start-Stop: Briefly turns off the engine at traffic lights. The engine restarts once your foot leaves the brake pedal.
Was this review help?
10
3
Share
More Forum Discussions

Is the BMW X3's on-demand four-wheel drive normally rear-wheel drive?

The BMW X3 features an on-demand four-wheel drive system based on a rear-wheel drive platform. It utilizes a transfer case with the code name ATC13, equipped with a multi-plate clutch central differential. The four-wheel drive system of the BMW X3 can continuously adjust torque distribution according to road conditions, intelligently delivering the most suitable torque to the front and rear wheels. By default, the torque distribution between the front and rear wheels is set at 40:60, with the maximum torque distribution ratio ranging from 0:100 to 100:0, and torque distribution can be completed within 0.1 seconds. How the four-wheel drive system works: When the vehicle is traveling at high speed, the system may detect potential understeer, in which case it reduces the torque allocated to the front axle, effectively transmitting almost all power to the rear axle to ensure driving stability. When the vehicle experiences wheel slip, all four wheels can achieve stronger traction under varying drive torque, thereby preventing wheel spin.
8
3
Share

Which Button is for Car Defrosting?

Car defrosting buttons include the front and rear window defrost buttons. The front window defrost button is labeled "FRONT" and features a fan-shaped pattern with three upward-waving lines. The rear window defrost button is labeled "REAR" and has a rectangular pattern with three upward-waving lines. Location of the car window defrost buttons: The defrost button switches are typically located in the central control area, next to the air conditioning controls. First, turn on the car's air conditioning, then press the window defrost button. This will direct the air conditioning airflow toward the windows, helping to eliminate fog. Avoid using the windshield wipers after defrosting: After the windshield frosts, the wipers may freeze. Forcing them to operate could burn out the motor. Additionally, even if the wipers can move, they might leave scratches on the glass during defrosting.
12
3
Share

Can the vehicle body touch the line during curve driving?

During the Subject 2 curve driving test, the vehicle body must not touch the line. When the midpoint of the front of the car touches the right yellow line: Gradually turn the steering wheel to the left, starting with half a turn. Use the left corner of the front of the car to follow the yellow line. If the left corner is about to go beyond the yellow line, turn the wheel a bit more. If the left corner cannot reach the yellow line, turn the wheel back slightly. Continuously make minor adjustments. When the front of the car is in the middle of the curve: When the front of the car is in the exact middle of the curve transition, quickly straighten the steering wheel, usually by turning it back about one full turn. When the midpoint of the front of the car touches the left yellow line: When the midpoint of the front of the car touches the left yellow line, turn the steering wheel to the right by half a turn first, then make small adjustments as needed, following the curve.
16
1
Share

What type of engine oil should be used for a Honda Fit?

The Honda Fit can use 5W-30 engine oil. The type of engine oil required depends on the vehicle's engine specifications. For vehicles equipped with a naturally aspirated engine, mineral engine oil or semi-synthetic engine oil can be used. If the vehicle has a turbocharged engine, semi-synthetic or full-synthetic engine oil is recommended. The number "5" indicates the oil's low-temperature fluidity—the smaller the number, the lower the ambient temperature at which the oil can be used, providing better engine protection during cold starts. For example, "5" means the oil can withstand external temperatures as low as -30°C. The "W" stands for "Winter," indicating suitability for cold weather. The "30" represents the oil's kinematic viscosity standard at 100°C, with higher numbers indicating better high-temperature protection. Generally, mineral engine oil should be replaced every 5,000 kilometers, semi-synthetic oil every 7,500 kilometers, and full-synthetic oil approximately every 10,000 kilometers.
8
2
Share

How Long After Failing the Motorcycle Test Can You Retake It?

You can schedule a retest for the motorcycle exam ten working days after failing. Cancellation of Appointment: If the applicant is unable to attend the exam at the scheduled time, they must apply to cancel the appointment one day in advance. Failure to attend the exam at the scheduled time without cancellation will result in the exam being marked as failed. Number of Retests: Each subject can be tested once, and if failed, can be retaken once. If the applicant does not attend the retest or fails the retest, the current exam session is terminated. If the subject three safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. Number of Appointments: Within the validity period of the driving skill test permit, the number of appointments for subject two and subject three road driving skill tests must not exceed five. If the fifth appointment still results in failure, the passed scores of other subjects will be invalidated.
3
1
Share

Can a C-class license drive a double-row mini truck?

C1 driver's license can drive a double-row mini truck. Permitted vehicle types for C-class license: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", the permitted driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Precautions for driving on highways with a C-class license: According to relevant regulations in the "Regulations on the Application and Use of Driver's Licenses", the first 12 months after a motor vehicle driver initially applies for a motor vehicle driver's license is the probationary period. During the probationary period, C1 drivers can drive on highways, provided that there is a "veteran driver" with more than three years of driving experience accompanying them in the front passenger seat. Otherwise, they will be fined.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.