What are the four conditions for upgrading from C1 to B2 license?

2 Answers
DelAlexandra
07/24/25 4:09am
The four conditions for upgrading from C1 to B2 license are age restrictions, holding the license for at least 2 years, not having accumulated 12 penalty points, and not having been involved in major traffic accidents. Upgrading from C1 to B2 requires passing all driving tests, including Theory Test (Subject 1), Practical Driving Test (Subject 2), Road Test (Subject 3), and Safety & Civilization Driving Test (Subject 4). Age Restrictions Currently, the C1 driver's license has no upper age limit, requiring only that applicants be at least 18 years old and pass a medical examination to take the driving test. However, the B2 license differs significantly, imposing strict age requirements. The B2 license is restricted to individuals aged 21 to 50. Therefore, when upgrading from a C1 to a B2 license, applicants must not exceed 50 years of age or be under 21. Holding the License for at Least 2 Years After obtaining a C1 license, there is a one-year probationary period during which an upgrade application cannot be submitted. Therefore, applicants must wait until the C1 license has passed the probationary period and has been held for at least 2 years before applying to upgrade to a B2 license. Not Having Accumulated 12 Penalty Points As is well known, a driver's license has a maximum of 12 penalty points per cycle. Violations while driving result in point deductions and fines. To upgrade from C1 to B2, applicants must not have accumulated 12 penalty points within two cycles. If 12 points were deducted in any two cycles, the applicant cannot apply for an upgrade and must wait for another two cycles without accumulating 12 points before reapplying. Not Having Been Involved in Major Traffic Accidents Obtaining a B2 license allows drivers to operate large trucks, such as 9.6-meter-high barrier trucks, which demand high driving skills. If a driver lacks sufficient experience, accidents are more likely to occur. However, accidents involving large trucks differ from those involving private cars due to their size, weight, and cargo. The consequences of such accidents can be severe. Therefore, the B2 license imposes strict requirements on driving skills. The following outlines the main components of the upgrade test: Subjects 1, 3, and 4 remain unchanged, covering theory, road tests, and safety & civilization driving tests. Subject 2 includes tests such as pole parking, hill starts, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate passage, continuous obstacle navigation, bumpy road driving, narrow road U-turns, and simulations for highways, mountain roads with sharp turns, tunnels, rain/fog conditions, slippery roads, and emergency handling. During the probationary period after upgrading, driving vehicles under the original license class is unrestricted. A driver's license, officially known as a motor vehicle driving license or simply "license," is a legal document required for operating motor vehicles. It certifies that the holder has learned and mastered traffic regulations and driving skills, passed relevant tests, and is legally permitted to drive specific types of vehicles. Applicants cannot upgrade from C1 to B2 under the following circumstances: causing a fatal accident with equal or greater liability, drunk driving, or having their license revoked or suspended within the past 10 years. Since the B2 license, like the C1, can be applied for during the initial driving test registration, applicants need only enroll in a driving school. However, many regions lack driving schools or test centers for B2 licenses. In such cases, applicants can apply for a B2 license in another location where such facilities are available. According to Article 19 of the "Road Traffic Safety Law": Driving a motor vehicle requires a valid driver's license. Applicants must meet the driving permit conditions set by the public security department under the State Council. Upon passing the test, the traffic management department issues the corresponding license. Drivers must operate vehicles within their licensed class and carry their license while driving. Therefore, it is clear that driving without a license or operating a vehicle beyond the licensed class is illegal. Per the State Council Legislative Affairs Office's reply on the interpretation of the "Road Traffic Safety Law" and its implementation regulations: Driving a vehicle beyond the licensed class is considered unlicensed driving. Penalties should be proportionate, with lighter punishments possible compared to unlicensed driving. Both offenses fall under Article 99 of the "Road Traffic Safety Law," which stipulates fines and potential detention of up to 15 days for driving without a license, with a revoked or suspended license.
Was this review help?
6
4
Share
SanMiranda
08/10/25 11:43pm
As a seasoned driver with over a decade of experience, I'm looking to upgrade from a C1 to a B2 license to take on more hauling jobs and earn some extra income. There are four basic requirements for this: First, you must have held a C1 license for at least one year—think of it as a 'service period' for your license; you can't upgrade right after obtaining it. Second, you must be at least 20 years old, as driving larger trucks under a B2 license requires a more mature age group—I didn't apply until I was 28. Third, you must not have accumulated 12 penalty points in the past year. If you've been involved in major accidents or run red lights, forget about it—safety records matter. Fourth, you must pass a medical exam, focusing on vision (corrected vision of at least 5.0), hearing, and the absence of red-green color blindness. A friend of mine failed due to color blindness. In short, when preparing, it's best to bring your ID and original driver's license, fill out forms at the DMV, then take the written and practical tests. Take your time with the upgrade process—proceeding step by step saves time and hassle.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Why is the fuel gauge needle not moving?

Fuel gauge needle not moving is a minor issue, and the likely causes of the fault are the fuel float (fuel level sensor) or the fuel gauge circuit. Since these components are mostly located inside the car, professional repair shops are required for maintenance. Below are the detailed explanations: 1. Fuel float failure: The fuel float is also known as the fuel level sensor. Check whether the fuel level sensor plug on the fuel tank is loose, oxidized, or burnt, and observe if there is any sticking during the sliding process of the fuel level sensor. 2. Fuel gauge circuit failure: If there is a problem with the fuel gauge circuit on the dashboard, it is necessary to remove the dashboard and use a multimeter and a pin to locate and test the corresponding fuel gauge circuit on the dashboard.
13
4
Share

What is the difference between the battery of an electric vehicle and that of a conventional car?

The differences between the battery of a conventional car and that of an electric vehicle: The car battery discharges to start the engine motor in an instant, while the electric vehicle battery continuously discharges to power the motor for rotation. The car battery is a starting-type battery, whereas the electric vehicle battery is a power-type battery, also known as a traction battery. Below is some information about batteries: 1. A battery is a type of cell, also called an accumulator, which works by converting chemical energy into electrical energy. 2. Typically, the battery people refer to is a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte.
3
4
Share

Where is the car clutch located?

The car's clutch is located on the far left. Generally, a manual transmission car has three pedals, arranged from left to right as follows: clutch pedal, brake pedal, and accelerator pedal. The left foot controls the clutch pedal, while the right foot controls the accelerator and brake. Here is more information about the clutch: 1. The principle of the clutch is: when the clutch pedal is pressed or released, it temporarily separates or gradually connects the engine and the transmission to cut off or transmit the power input from the engine to the transmission. 2. Key points for operating the clutch: To shift gears in a manual transmission car, you must press the clutch pedal; when not shifting, do not rest your foot on the clutch pedal; lift the clutch gently and slowly; when starting on a slope, find the semi-engagement position and slowly release the clutch.
18
5
Share

What are the differences between Subject 1 and Subject 4 in the driver's license test?

The main differences between Subject 1 and Subject 4 are: number of questions, question types, content distribution, and examination focus. The basis comes from the "Regulations on the Application and Use of Motor Vehicle Driving Licenses". Number of questions: The most obvious difference between Subject 1 and Subject 4 is the number of test questions. Subject 1 has 100 questions, while Subject 4 only has 50 questions; Subject 1 automatically submits the test when more than 10 questions are answered incorrectly, while Subject 4 automatically submits when more than 6 questions are answered incorrectly. Question types: Subject 1 consists of 100 questions, each worth 1 point, with a total test time of 45 minutes. The question types are true/false and single-choice questions, with a full score of 100 points. Subject 4 consists of 50 questions, each worth 2 points, with a test time of 45 minutes. The questions are mainly in the form of cases, pictures, animations, etc., and the question types are true/false, single-choice, and multiple-choice questions, with a full score of 100 points. Examination focus: Subject 1 mainly tests basic knowledge of road driving, while Subject 4 mainly tests safe and civilized driving knowledge. It can be understood this way: Subject 1 tests how to drive, while Subject 4 tests how to drive safely. Although the difference is only two words (safety), the focus is completely different. Content distribution: Subject 1 test content composition: driving license and motor vehicle management regulations account for 20%; road traffic conditions and regulations account for 25%; road traffic safety violations and penalties account for 25%; road traffic accident handling regulations account for 10%; basic knowledge of motor vehicles accounts for 10%; local regulations account for 10%. Subject 4 test content composition: safe driving knowledge accounts for 20%; civilized driving knowledge accounts for 18%; comprehensive application of road traffic signals in traffic scenarios accounts for 8%; safe driving knowledge under adverse weather and complex road conditions accounts for 16%; emergency avoidance knowledge accounts for 12%; typical accident case analysis accounts for 6%; traffic accident rescue and common hazardous chemical handling knowledge accounts for 10%; local test questions account for 10%. There is no limit to the number of attempts for Subject 1 and Subject 4 in the driver's license test. If the test is failed, it can be rescheduled. Each scheduled test has two attempts. If both attempts are failed, only a retake is required until the test is passed. Both Subject 1 and Subject 4 are theoretical tests and are part of the motor vehicle driver's license assessment. The driver's license test consists of 3 subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. In the official terminology (i.e., the Ministry of Public Security Order No. 123), there is no such thing as Subject 4.
20
4
Share

How to Identify an Earth Dreams Engine?

If it is an Earth Dreams engine, after opening the engine hood, there will be a blue nameplate on the engine with the word 'earthdream' written on it, indicating it is an Earth Dreams engine. Here is more information about Earth Dreams engines: 1. Earth Dreams is not just one engine, but a series of engines. 2. Earth Dreams is a Honda engine technology, and many Honda engines are equipped with this technology. For example: the 1.5L naturally aspirated engine in the Fit, the 1.5L turbocharged engine in the Civic, etc. The engines in the Honda Fit and Civic are the power leaders in their class and also offer excellent fuel economy.
1
4
Share

What is Wheel Alignment for Vehicles?

Wheel alignment is based on the four-wheel parameters of a vehicle, adjusted to ensure good driving performance and certain reliability. Below is more information about wheel alignment: 1. Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in. Rear wheel alignment includes camber angle and individual rear wheel toe-in. Wheel alignment is the general term for front and rear wheel alignment, commonly referred to as four-wheel alignment. 2. The purpose of wheel alignment is to keep the car driving straight stably and make steering easier, while reducing the wear of tires and steering components during driving. The installation of the vehicle's four wheels, steering mechanism, and front and rear axles should have a certain relative position, which is specified by the manufacturer.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.