What are the features of the Haval M6 Plus?

What does the exclamation mark on the Volkswagen Bora dashboard mean?

There are three situations when an exclamation mark appears on the Volkswagen Bora dashboard. Below are the three situations and their solutions: Three situations when an exclamation mark appears on the Volkswagen Bora dashboard: 1. A triangle with an exclamation mark in the middle: This is a general fault indicator light. 2. A circle with parentheses and an exclamation mark in the middle: This is the brake system warning light. 3. A horizontal line with parentheses and an exclamation mark below: This is the tire pressure monitoring warning light. It lights up when the pressure in one of the vehicle's tires is too low. Solutions: If a red exclamation mark appears on the dashboard while driving, it indicates a brake system fault. First, check if the handbrake is fully released. If the light remains on after releasing the handbrake, inspect the brake fluid level or check if the brake pads are too thin. If the braking force hasn't weakened, you can drive cautiously and head to the nearest repair shop as soon as possible, as the condition of the brakes directly affects driving safety.

4

1

Share

What are the reasons for the high engine temperature in the Hongguang S3?

There are five main reasons for the high engine temperature in the Hongguang S3. Below are the causes of high engine temperature: Reasons for high engine temperature: Fan malfunction. A faulty fan can affect its normal operation. Specific causes include delayed or premature activation of the fan electromagnetic clutch or fan motor control switch; the fan not turning at all; or failure of the fan silicone oil clutch. Insufficient coolant. Low coolant levels due to excessive internal consumption, primarily caused by cylinder head damage. Poor coolant circulation. Specific causes include water pump failure; thermostat damage; excessive scale buildup in the radiator or engine water passages, not cleaned in time. Poor engine performance. Main causes include delayed ignition timing, overly lean fuel mixture, excessive carbon buildup in the combustion chamber, and engine knocking. Insufficient oil. This prevents moving parts from receiving adequate lubrication, increasing friction resistance, accelerating wear, and generating more heat. It also raises the oil temperature, reducing its viscosity, which worsens friction, heat generation, and heat dissipation, leading to engine overheating. Radiator cooling issues. Main causes include blockage by debris between cooling fins; deformed radiator fins; internal radiator blockage; or the louver not opening fully. Solutions: Find a safe place to pull over and let the vehicle idle without turning off the engine, as shutting it down would stop the cooling fan and coolant circulation, making the engine even hotter. Open the hood to increase airflow and wait for the water temperature to drop before slightly loosening the radiator cap. Open it fully only after internal steam has been released. Check the radiator hoses for leaks and ensure the coolant level is sufficient. If no coolant is available, mineral water can be used temporarily, but it must be replaced with proper coolant later. For engine overheating, the average person can usually only check and add coolant. For other issues like water pump or thermostat failure, professional assistance is required.

6

4

Share

How many liters of transmission fluid are needed for a gravity change in the Volkswagen Tiguan?

For a gravity change of transmission fluid in the Volkswagen Tiguan, four to five liters are required. Signs that indicate the need for transmission fluid replacement include body shaking, gear shifting hesitation, the appearance of a transmission overheating warning on the dashboard, engine stalling, and unusual noises. The replacement intervals for Volkswagen Tiguan transmission fluid are as follows: Manual Transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately every 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be replaced every two years or approximately every 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be replaced every two years or approximately every 60,000 kilometers. The methods for replacing Volkswagen Tiguan transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the fluid, then refill. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to replace automatic transmission fluid: Dynamic fluid replacement using an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.

14

4

Share

Where is the water drain valve of the Yuexiang radiator?

The water drain valve of the Yuexiang radiator is located at the lower left corner of the radiator, where there is a plastic screw, which serves as the drain outlet. Water filler port: The water filler port of the car radiator is generally located on the right side of the engine compartment, usually next to the windshield washer fluid filler port. Radiator: The radiator is a crucial component of a water-cooled engine, serving as an important part of the engine's cooling circuit. It absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, the temperature rise after absorbing the engine block's heat is not significant. Therefore, the engine's heat is dissipated through the liquid cooling circuit, using water as the heat transfer medium. The heat is then dissipated through large-area cooling fins via convection to maintain the engine's optimal operating temperature.

1

2

Share

What is the fuel consumption of the Jeep Compass?

The comprehensive fuel consumption of the Compass is 6.0-7.6L/100km. There are currently 7 models of the 2021 Compass on sale. The comprehensive fuel consumption of the automatic comfort version is 6.0L/100km; the automatic luxury version is 6.3L/100km; the automatic four-wheel-drive high-performance flagship version is 7.6L/100km; the automatic four-wheel-drive elite version and the automatic four-wheel-drive 80th anniversary edition are 7.3L/100km; the automatic elite version and the automatic leading version are 6.2L/100km. The above are the NEDC comprehensive fuel consumption figures, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.7-9.3L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: When driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during driving, making the car more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and evenly, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspection: Regular oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. Close windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car faces, requiring more power and thus increasing fuel consumption.

9

3

Share

What is the reason why the Bluetooth of Haval H2 cannot be turned on?

Haval H2 Bluetooth cannot be turned on because the Bluetooth of the phone and the car navigation system are not matched. Activate Bluetooth: Turn on the ignition switch and start the radio system. Turn on the Bluetooth on the phone, and press the function button (PHONE) to activate Bluetooth. Search for pairing phone: Briefly press the function button on the screen (search for phone). Select the mobile phone to be paired from the found Bluetooth device list. To complete the connection between the two devices, further input may be required on the mobile phone and infotainment system. Connection: Enter the PIN code displayed on the infotainment system screen on the mobile phone and confirm it. If the pairing is successfully completed, the main menu of the phone will be displayed, and the phonebook, call list, and text messages stored in the mobile phone will be automatically loaded. If necessary, confirmation is required on the mobile phone.

17

3

Share

What are the features of the Haval M6 Plus?

What does the exclamation mark on the Volkswagen Bora dashboard mean?

What are the reasons for the high engine temperature in the Hongguang S3?

How many liters of transmission fluid are needed for a gravity change in the Volkswagen Tiguan?

Where is the water drain valve of the Yuexiang radiator?

What is the fuel consumption of the Jeep Compass?

What is the reason why the Bluetooth of Haval H2 cannot be turned on?

Where is the horn location of the Mercedes-Benz S350 Business Edition?

Why is the front air conditioning of the BMW 7 Series not blowing air while the rear is normal?

What is the reason why the front door of the new Sylphy cannot be opened from inside or outside?

Are Bestune and Jetta produced by the same manufacturer?