What are the exterior differences between the BMW X3 and X5?

How to Use the Auto Hold Function in a Manual Transmission Car?

To use the auto hold function in a manual transmission car: With the seat belt fastened and the door closed, the driver simply needs to press the AUTOHOLD button or the button marked with an 'A' when needed. When stopping, pressing the brake will activate the auto hold. To start moving again, shift gears, release the clutch while applying the throttle, and the auto hold function will automatically deactivate. The principle of auto hold is that the controller provides precise parking force through the slope sensor. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.

8

5

Share

What is the method to reset the maintenance light on the Suzuki SX4?

Suzuki SX4 maintenance light reset steps: 1. First, turn on the car's ignition switch, and the LCD display in the lower right area of the combination instrument panel will show "OIL" for 5 seconds. Within these 5 seconds, press the selection button and hold it for more than 5 seconds. 2. Release the indicator selection button, and quickly press the button 5 times consecutively within 2 seconds; after "OIL" flashes 3 times and then turns off, the reset operation is completed. 3. Additional information: The maintenance light is a reminder function set by the car manufacturer to alert the owner to perform maintenance at certain mileage or time intervals, in the form of an instrument or screen message or indicator light.

14

2

Share

How to Solve the P2138 Fault?

p2138 fault solution: Focus on inspecting the throttle body, and replace it with a new one if necessary. The P2138 fault code indicates that there is a problem with the throttle or accelerator pedal position sensor. The possible causes of this phenomenon are: 1. The throttle body itself is faulty or the accelerator pedal position sensor is not working properly; 2. A fault in the wiring related to the throttle body to the accelerator pedal position sensor. The throttle body is one of the important components of today's fuel-injected engine systems. Its upper part connects to the air filter, and the lower part connects to the engine block, serving as the throat of the car engine. Whether the car accelerates smoothly is closely related to the cleanliness of the throttle body. Cleaning the throttle body can reduce fuel consumption and make the engine more responsive and powerful.

13

0

Share

How to Adjust the Focus Seat?

How to adjust the Focus seat: 1. Under the front of the seat, there is usually a metal crossbar. Lift it up and then adjust the seat forward or backward to the desired position; 2. The handle is on the left side of the seat. Pull it up to raise the seat and press it down to lower the seat; 3. The backrest adjustment handle is located at the lower left of the seat backrest. Pull it forward to adjust. The Focus is a Ford A-segment family car with a length, width, and height of 4647 mm, 1810 mm, and 1468 mm respectively, and a wheelbase of 2705 mm. In terms of suspension, the Focus features a MacPherson strut front suspension and a torsion beam rear suspension.

10

1

Share

How to Replace the Cabin Air Filter on Changan CS35?

The method for replacing the cabin air filter on Changan CS35 is as follows: Locate the fixing buckle on the right side of the glove box and pull it outward with force. After removing the glove box, you will see the cabin air filter cover. Press the fixing buckles on both sides of the cover firmly to remove it. Pull out the old cabin air filter to the outside, install the new one, and then reassemble everything in reverse order. The dimensions of Changan CS35 are 4170mm in length, 1810mm in width, and 1670mm in height, with a wheelbase of 2560mm. In terms of configuration, Changan CS35 comes standard with features such as parking sensors, power windows, and an LCD display. Higher trim models are equipped with a power sunroof, automatic air conditioning, and a multifunction genuine leather steering wheel.

11

4

Share

What are the symptoms of a car battery about to fail?

Symptoms of a car battery about to fail: 1. The vehicle is more difficult to start than usual, requiring multiple ignition attempts, indicating insufficient starting power; 2. When the vehicle is idling, the headlights quickly dim from bright, showing that the battery power is insufficient and needs replacement; 3. When the battery is nearing the end of its lifespan, it affects the alternator's performance, often causing abnormal noises (usually a slight squeaking sound) during vehicle startup; 4. Normally, the vehicle runs fine, but occasionally, after parking, you may find the entire vehicle without power upon restarting. This happens because, as the battery nears the end of its life, the starting current is insufficient, leading to increased oxidation at the battery terminals and resulting in a complete loss of power.

9

5

Share

What are the exterior differences between the BMW X3 and X5?

How to Use the Auto Hold Function in a Manual Transmission Car?

What is the method to reset the maintenance light on the Suzuki SX4?

How to Solve the P2138 Fault?

How to Adjust the Focus Seat?

How to Replace the Cabin Air Filter on Changan CS35?

What are the symptoms of a car battery about to fail?

What does B-segment sedan mean?

Why do some Mercedes-Benz cars have a B logo?

Where is the cabin air filter located in the Haval H3?

How to spray windshield washer fluid on Mercedes-Benz C200?