What are the evaluation criteria and requirements for Subject 3?

1 Answers
DeAlexa
07/30/25 9:49am
Failure to walk around the vehicle to inspect its appearance and surrounding environment will result in disqualification. Failure to walk around the vehicle to inspect its appearance and surrounding environment will result in disqualification, etc. Below is a detailed introduction to the Subject 2 examination: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items for small cars C1 and C2 include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. 2. Others: If the first attempt at Subject 2 is unsuccessful, a retake is allowed. If the retake is not attended or is still unsuccessful, the examination will be terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five.
Was this review help?
6
4
Share
More Forum Discussions

Where is the location of the X-Trail's cabin air filter?

The cabin air filter of the X-Trail is located on the driver's side, diagonally above the accelerator pedal. You can see it by removing the cover panel. The cabin air filter is a type of filter installed in the car's air conditioning system. It can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. There are two types of cabin air filters: one without activated carbon and another with activated carbon. The X-Trail is a compact SUV under Dongfeng Nissan. The vehicle's dimensions are 4675mm in length, 1820mm in width, and 1722mm in height, with a wheelbase of 2706mm. It is equipped with a 2.5L inline-four engine featuring CVTC (Continuous Valve Timing Control), delivering a maximum horsepower of 180 PS and a maximum torque of 245 Nm.
16
5
Share

Can a new battery be charged before it's fully depleted?

A new battery can indeed be charged even if it hasn't been fully depleted. Battery charging and discharging process: Battery charging is essentially an electrochemical [reduction] process, which involves applying a current opposite to that of discharging to restore the battery plates to their original state (before discharge). During discharge, the plates absorb sulfuric acid from the electrolyte, releasing electrical energy. The sulfuric acid adheres to the plates, increasing the resistance between electrodes as discharge time progresses until the electrode voltage drops, reducing discharge capacity. Typically, when a 12V battery discharges to 10.5V, it can no longer continue discharging, which is known as the discharge termination voltage. Battery definition: A battery is a type of cell, also referred to as an accumulator, that works by converting chemical energy into electrical energy. The term 'battery' commonly refers to lead-acid batteries, which primarily use lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte.
4
0
Share

What Does the Wrench Symbol in a Car Mean?

This wrench symbol is the maintenance reminder light; if your car requires servicing, this indicator will illuminate. After completing the car maintenance, it will turn off following a specific procedure. Here are some relevant details: 1. The purpose of this feature is to remind the driver to service the vehicle after it has been driven a certain distance. In other words, when this light stays on for an extended period, it's time to visit the 4S shop for maintenance. Different car models from various manufacturers have varying maintenance intervals, so always refer to the vehicle's user manual. After maintenance is completed, there is a reset procedure to clear the maintenance light. If not reset, the indicator will remain lit even after servicing. 2. The goal of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, slow down deterioration, and extend the vehicle's lifespan.
15
3
Share

What are the reasons why a car cannot accelerate?

The following are the reasons why a car cannot accelerate: Excessive carbon deposits in the car engine: Excessive carbon deposits in the throttle and engine, damage to the idle position sensor and air flow meter, leading to excessively high temperature in the combustion chamber and disrupting the normal operation of the engine. Blockage in the fuel system causing insufficient fuel supply: First, check whether the fuel filter is blocked, whether the fuel pump pressure is sufficient, and whether the fuel injector is clogged. Air entering the fuel system making the air-fuel mixture too lean: Gasoline vaporization and combustion require a certain temperature to proceed. When the car is cold, the engine runs unevenly, causing the air-fuel mixture to become too lean. Therefore, it is necessary to warm up the car before driving.
16
3
Share

Is it safe to drive with steering gear noise?

It is not safe to drive with steering gear noise as it poses a danger. The steering gear is the most critical component for a vehicle's steering function and a vital guarantee for driving safety. If the steering gear malfunctions, the driver loses control over the direction, which can lead to hazardous situations. Causes of steering gear noise include: 1. Lack of lubrication in the steering column, resulting in high friction; 2. Insufficient power steering fluid; 3. Issues with the universal joint; 4. Aging and hardening of rubber bushings in the suspension stabilizer bar links; 5. Damage to the thrust bearing. Precautions for using the steering gear include: 1. Avoid turning the steering wheel while stationary; try to steer only after the vehicle is in motion; 2. After parking, always return the steering wheel to the central position to prevent unnecessary stress on the suspension system and tires.
3
4
Share

How to Control Vehicle Speed During Subject 2 Driving Test?

Methods to control vehicle speed during Subject 2 driving test are: 1. Preparation in advance: First, ensure all equipment is ready beforehand and avoid last-minute changes at the test site. Additionally, develop the habit of not relying on the instructor during daily practice; 2. Practice speed control through straight-line driving: Whether moving forward or backward, maintain the vehicle on a straight path while repeatedly pressing and releasing the clutch to observe speed variations and feel the vehicle's vibration state; 3. Familiarize yourself with the clutch's semi-engaged state; 4. Coordinate clutch and brake: Press the clutch quickly but release it slowly, always keeping the movement range as minimal as possible; 5. Steering wheel: When turning the steering wheel to its limit, slightly prepare to lift the left foot as the locked wheels create forward resistance, slowing down the vehicle.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.